Kick's Mega Profile Packs 1-90

Hi, R?kmacka,

The objective for The Grimtotem Weapon is apparently broken at the moment. We'll need to get another toon into the area to collect the information necessary to repair the profile.

As a work around, please do the quest manually, turn it in, and start Honorbuddy again. Sorry for the inconvenience.

cheers,
chinajade


[size=-2]Ref: R?kmacka's original post w/log[/size]

 

Hi, Cevaps,

Nice go at it! You should find this article helpful:

HelpDesk: Profile is selling "Greens" that should be dis-enchanted​

cheers,
chinajade

 

Hi, Rzerox,

Your toon is trying to do The Exile in Townlong Steppes. Your toon was in "The Jade Forest" when you started the profile.

The profile is issuing the correct directives, so its not a profile issue. I've no explanation why Honorbuddy would try to take a bogus route to the destination, but that appears to be the case.

As a work-around, you should move your toon to Townlong Steppes near the area of The Exile's objectives, then start Honorbuddy.

Before doing that, you might try clearing your caches to make certain that's not contributing to the problem. Instructions here:

HelpDesk: Cache corruption problems​

cheers,
chinajade


[size=-2]Ref: Rzerox's original post w/log[/size]

 

Hi, Obbi, and thanks for the report and the log,

The Fortunate Misunderstandings quest chain is nothing but a PITA.

I've made a couple of blind changes in v2690 that should correct the problem you were seeing, but there may be more lurking about. The changes were made to only the Horde side. The Alliance side looks like it still needs to be updated, and that cannot be done 'blindly'.

cheers & sorry for the inconvenience.
chinajade


[size=-2]Ref: Obbi's original post w/log[/size]

 

Hi, Nashourne,

There is nothing wrong with the profile. You are probably suffering from cache corruption. You can find the appropriate article in the Help Desk thread.

In the future, if you need assistance, please attach a full log that captures the issue.

Ref: [Guide] How to attach your log​

cheers,
chinajade

 

Hi, Virtual,

In the future, please attach the full log. Cut-n-pasting logs as you have done is considered rude and forum abuse.

Ref: [Guide] How to attach your log​

As to your problem, your Honorbuddy installation is damaged, and you need to do a 'clean install'. You can find the instructions here:

HelpDesk: "Clean installing" Honorbuddy​

If you are unable to succeed at it, please follow up to the Support forum, and attach your full log.

Ref: [Guide] How to attach your log​

Your problem is not related to Kick's profile pack.

cheers,
chinajade

 

Hi, Zcybnm, and thanks for the log.

Your problem is not related to Kick's profiles, but something is wrong in your Honorbuddy installation.

[16:31:38.949 D] System.NullReferenceException: Object reference not set to an instance of an object.
at Styx.Pathing.Flightor.MountHelper.
(Boolean )
at Styx.Pathing.Flightor.MountHelper.MountUp()
at Styx.Pathing.Flightor.MoveTo(WoWPoint destination, Single minHeight)
at Styx.Pathing.Flightor.MoveTo(WoWPoint destination)
at Honorbuddy.Quest_Behaviors.FlyTo.FlyTo.<CreateBehavior>b__0(Object ret) in c:\Users\Carl\Desktop\Honor\hb\Quest Behaviors\FlyTo.cs:line 130
...<rest of log filled with this>...​

The first thing I would do is try 'clean installing' Honorbuddy. You can find the instructions here:

HelpDesk: "Clean installing" Honorbuddy​

If that yields no joy, please make a follow-up post into the Support forum with a fresh log.

cheers,
chinajade


[size=-2]Ref: Zcybnm's original post w/log[/size]

 

Hi, Thegosu, and thanks for the log.

Unfortunately, the log doesn't demonstrate a problem of "running around for two hours". It shows you looting a turtle for meat, then the log ends. Is this the full log?

If so, then it doesn't match your problem description, and there's not much here to analyze. If you'd like to try again, we'll be glad to give it another look.

cheers,
chinajade



[size=-2]Ref: Thegosu's original post w/log[/size]

 

Hi, Wullie, and thank you for the log and report.

I've made a blind change to v2691 of the profile that should correct the problem.

cheers,
chinajade


[size=-2]Ref: Wullie's original post w/log[/size]

 

Hi, Ostarion, and thank you for the log.

Your Honorbuddy installation is damaged, and you need to do a 'clean install'. You can find the instructions here:

HelpDesk: "Clean installing" Honorbuddy​

cheers,
chinajade


[size=-2]Ref: Ostarion's original post w/log[/size]

 

Hi, Chaosruler, and thanks for the report and the log.

Somehow IgnoreCheckpoints got set to "true". There has been a lot of updates in the profile pack, and this value needs to be true to debug things properly. Sometimes, a contributor will forget to set it back to 'false' before checking the profile in.

All should be put back right in v2692.

cheers,
chinajade


[size=-2]Ref: Chaosruler's original post w/log[/size]

 

Hi, Skeptikal,

Just load the 12-58 profile in the Classic folder, start Honorbuddy, and you should be off and away.

cheers,
chinajade

 

Hi, Murrayg,

Kick's profile pack doesn't do dungeons. You'll need to post in the correct thread, and be certain to attach your full log that demonstrates the issue.

Ref: [Guide] How to attach your log​

You need to set up Honorbuddy correctly, not "copy a folder". You can find installation instructions here, video or text, take your pick:

• CodenameG's excellent [VIDEO] How to Setup HonorBuddy. (narrated)
• Tony's excellent A quick Hb guide/presentation for a fast setup

If you need further assistance, please post to the Support forum, and don't forget to attach your log that captures whatever problem you're having.

cheers & good luck,
chinajade

 

Quest: Learn and Grow II: Tilling and Planting
Zone: Valley of the Four Winds

The bot is not tilling the soil before attempting to plant the seeds.

EDIT: The following quest (Learn and Grow III: Tending Crops) is not working at all.
EDIT 2: It's actually working for one of the crops only.

 

Uldum

Looks like here is the End. Toon interact with the NPC to pickup a Quest. But Bot Stopps.

[EDIT 17-Aug-2013 by chinajade]: Thanks again, Tumbum!
Yes, we know about this one. There is something problematical in picking up that quest from Sullah, and it was commented out. This causes other issues with following up on existing stuff. We need to get a toon back into the area to see how it can be repaired.

@Kick, another (of the same issue) with Sullah in Uldum.

 

Quest: Enough is Ookin' Enough
Zone: Valley of the Four Winds

This quest is pretty much impossible for any cloth wearer. You'll pull 4-5 mobs at a time, and whichever you manage to get low enough, flees, pulling many more.
I just saw my L89 Shadow Priest in full blue crafted gear (basically out gearing every leveling zone) get destroyed time after time after time.

You might wanna get rid of this quest. It doesn't seem to be connected to anything and it's an extra risk that, IMHO, is not worth it (you know, if anyone sees you dying to it over and over).
You could also add a class check, I suppose. I've seen it done on some of the lower level profiles.



[EDIT 17-Aug-2013 by chinajade]: Thanks for the report, Toney001.
@Kick, leaving this one for you.

 

Hi, Vexare,

Your Honorbuddy installation is damaged and you need to do a 'clean install'. You can find the instructions here:

HelpDesk: "Clean installing" Honorbuddy​

Next time, please attach the full log that captures the issue.

Ref: [Guide] How to attach your log​

cheers,
chinajade

 

Hi, Tumbum. Thank you for the log and screenshot.

I see in your log where Honorbuddy is going to turn in the quest, but cannot find where Honorbuddy is attempting to attack the mob.

[16:52:45.723 D] Goal: Turning in Quest - Efficient Excavations : QuestID - 28132 : To - Belloc Brightblade : ID - 47670
[16:52:45.723 D] Changed POI to: Type: QuestTurnIn
[16:52:46.116 N] Moving to Type: QuestTurnIn
[16:52:46.117 D] Activity: Loading Tile/s
[16:52:46.117 D] Loading Kalimdor_30_52
[16:52:46.611 N] Moving to Type: QuestTurnIn
[16:52:50.769 D] [NBH]: no suitable targets
[16:52:51.358 D] [CGSpellBook::CastSpell] Override ID: 121253, KnownIndex: 35
[16:52:51.488 N] 51:453 - hp: 100 - Chi: 0 Energy: 100 - Belloc Brightblade - 4.05y - 100 hp - Keg Smash (KegSmashBrew)
[16:52:51.751 D] [CGSpellBook::CastSpell] Override ID: 121253, KnownIndex: 35
[16:54:59.216 N] Enabling Check at 18:54:59
[16:54:59.216 D] Checktimer has Finished its Total wait of 5 Minutes, Enabling Item Check for next Opportunity
[16:54:59.216 N] Will Run Next Check At 18:59:59
[16:54:59.217 D] EnableCheck was Passed!
[16:54:59.217 D] Turning off Check Since Done!
[16:54:59.413 D] [CGSpellBook::CastSpell] Override ID: 121253, KnownIndex: 35
[16:59:59.424 N] Enabling Check at 18:59:59
[16:59:59.424 D] Checktimer has Finished its Total wait of 5 Minutes, Enabling Item Check for next Opportunity
[16:59:59.424 N] Will Run Next Check At 19:04:59
[16:59:59.424 D] EnableCheck was Passed!
[16:59:59.425 D] Turning off Check Since Done!
[16:59:59.619 D] [CGSpellBook::CastSpell] Override ID: 121253, KnownIndex: 35​

To me, it looks like one of the Plugins may be interfering with proper Honorbuddy operation. The messages marked in blue are your 'attack' attempts. These directives are not coming from Singular--that only leaves a Plugin doing this.

In any case, this is not a problem with the profile--as the profile has issued the Turnin directive, and cannot do an more until Honorbuddy completes this task. You should follow up to the Support forum if you continue to suffer from this problem.

cheers,
chinajade


[size=-2]Ref: Tumbum's original post w/log[/size]

 

Hi, Tumbum, and thanks for the log and screenshot!

[18:19:13.807 D] Styx.InvalidObjectPointerException: Cannot read a descriptor on an invalid object.

at Styx.WoWInternals.WoWObjects.WoWObject.
[
](UInt32 )
at Styx.WoWInternals.WoWObjects.WoWUnit.get_CharmedByUnitGuid()
at Styx.WoWInternals.WoWObjects.WoWUnit.get_CharmedByUnit()
at Styx.WoWInternals.WoWObjects.WoWUnit.get_OwnedByUnit()
at Styx.WoWInternals.WoWObjects.WoWUnit.get_OwnedByRoot()
at Styx.WoWInternals.WoWObjects.WoWUnit.get_SafeName()​

This is a problem with neither the profile, nor the quest behavior. There is some issue in trying to read the unit's name. It could be time to reboot the system, or it could be a bad offset in Honorbuddy. In either case, there is nothing the profile or QB can do to make it better.

I'd try rebooting, and if the problem continues, report it in the Support forum or release thread, please.

cheers,
chinajade



[size=-2]Ref: Tumbum's original post w/log[/size]

 

Hi, Whacha413, thanks for the log and report.

In v2695, I've made a change that should correctly use the item now. The problem was there was no qualification to use it on a 'dead' mob, as required by the quest.

As to your "Now it went to repair and went half way from town to the quest area and keeps staring at a tree" issue:

[03:38:36.005 N] Moving to Type: Sell, Name: Blacksmith Abasi
...<log just stops>...​

It looks like your Honorbuddy simply decided to stop working. You should post this problem to the "Release" thread please.

The profile is not running during a 'sell/repair' run. The control is completely under HBcore itself at this point. Since the profile is not running at all during a 'sell' run, there is nothing the profile can do to abate the issue.

cheers,
chinajade


[size=-2]Ref: Whacha413's original post w/log[/size]