HB ARCHIVES: Kick's Old Posts Thread--DO NOT DELETE!

Hi, Rawrasaurus, and thanks for the log!

From your log, we see this...

[22:02:28.525 D] Changed POI to:Type: QuestPickUp
[22:02:28.714 D] InteractDebug:528472900
[22:02:28.715 D] Interact Done:528472900
[22:02:33.618 D] Cleared POI - Reason Quest Completed
[22:02:33.618 D] Cleared POI
[22:02:33.754 D] Changed POI to:Type: QuestPickUp
[22:02:33.981 D] InteractDebug:528472900
[22:02:34.014 D] Interact Done:528472900
[22:02:37.997 D] Cleared POI - Reason Quest Completed​

Your remedy awaits you, here. If you're not off-and-away after that, please show us a fresh log.

cheers,
chinajade

 

Hi, Partiro,

It looks like you are suffering from cache corruption. Your remedy awaits, here.

If you are not off-and-away after applying the remedy, please show us a fresh log.

cheers,
chinajade

 

Hi, Akitsune, and thanks for the log.

From it, we see a number of disturbing issues:

[19:03:04.691 N] System.AccessViolationException: Could not read bytes from 00000030 [299]!
at Styx.MemoryManagement.ExternalProcessReader.ReadBytes(IntPtr address, Int32 count, Boolean isRelative)
at Styx.MemoryManagement.ExternalProcessReader.Read[T](IntPtr address, Boolean isRelative)
at Ž..
(UInt32 )
at Ž..
(UInt32 )
at Styx.CommonBot.FlightPaths.
(Object , LuaEventArgs )

[19:25:27.922 D] System.ArgumentOutOfRangeException: Index was out of range. Must be non-negative and less than the size of the collection.
Parameter name: index

[22:47:02.186 D] Exception when attempting to download Kalimdor_39_38: System.TimeoutException: This request operation sent to net.

[22:51:34.863 D] System.AccessViolationException: Could not read bytes from 28EB61F0 [299]!
at Styx.MemoryManagement.ExternalProcessReader.ReadBytes(IntPtr address, Int32 count, Boolean isRelative)

[23:02:38.123 D] System.NullReferenceException: Object reference not set to an instance of an object.
at Bots.Grind.LevelBot.(Object )​

In short, this is a smorgasbord of issues with unrelated causes. I believe you probably have a hardware problem (or less likely, a driver problem) that needs to be addressed.

Let's start by downloading and running the gratis version of MemTest86, first. It should run for three full cycles without a single error. (This will take a few hours depending on your memory size and bandwidth). If it shows even a single error, we must address the hardware issue first. Many times, the problem can be repaired by reseating the memory, but other times, one or more sticks of memory must be replaced.

Once the Memtest passes, we need to make certain all your drivers are up-to-date. Graphics, sound, and chipset drivers particularly. The latter is not easy to do, unless your technically savvy. If not, you might look at a tool to help you install chipset drivers. I'm going to ask you to follow up to the support forum until, we've eliminated hardware and drivers as a possible cause.

cheers,
chinajade

 

Hi, Mengoarj, and thanks for the log!

The profile is trying to pick up Hellscream's Vigil. From the log, we see this...

[04:10:01.812 D] Could not generate path from {2673.351, 6075.403, 87.65818} to {2759.319, 6091.645, 77.78874} (time used: 0 milliseconds) @ FindStartPoly​

Your remedy is here. If you are not off-and-away after this, please show us a fresh log.

cheers,
chinajade

 

Hi, Mirko1987, and thanks for the log!

From this log, it looks like you are questing normally. From your log...

[19:30:07.434 D] Picking up La minaccia degli Zampalunga delle Pianure : 844
[19:30:07.434 D] Goal: Picking up La minaccia degli Zampalunga delle Pianure
[19:30:07.581 D] Changed POI to:Type: QuestPickUp
[19:30:07.911 N] Moving to Type: QuestPickUp​

You are headed to Crossroads in the Northern Barrens to pick up Plainstrider Menace. It looks like you are killing some Scorpions and Zevras on your way to pick up the quest.

cheers,
chinajade

 

It does. Just shop at the GTN for upgrades, although you'll have to be somewhat thrifty prior to level 23 or so (when gear doesn't matter quite so much).

 

Thanks for your answer china..but the problem is that the quest named Plainstrider Menace is already avaiable..It just picks it up but after it goes to orgrimmar to talking to the inn and after it starts to killing scorpions..

 

hm i got alot of bugs in outland, my character just runs around killing those worms hidden in the ground even tho he doesnt have a quest closeby or something, kill between hotspots is off to... anyone know what the problem might be? i tried cleared cache and restarting the bot but he keeps killing them

 

since the 5.2 i have some bug,

[UserSettings-v279(error)]: BEHAVIOR MAINTENANCE PROBLEM: Object reference not set to an instance of an object.
FROM HERE:
at BuddyWiki.CustomBehavior.UserSettings.UserSettings.UtilBuildPresetChangeRequests(Dictionary`2 configurationSettings, ConfigSnapshot originalConfiguration) \Quest Behaviors\UserSettings.cs:line 67
at BuddyWiki.CustomBehavior.UserSettings.UserSettings..ctor(Dictionary`2 args) in \Quest Behaviors\UserSettings.cs:line 136

[UserSettings-v279(warning) @line 187]: Attribute 'LootMobs' is not recognized by this behavior--ignoring it.
[UserSettings-v279(warning) @line 187]: Attribute 'PullDistance' is not recognized by this behavior--ignoring it.
[UserSettings-v279(warning) @line 187]: Attribute 'UseFlightPaths' is not recognized by this behavior--ignoring it.
[UserSettings-v279(error) @line 187]: Stopping Honorbuddy. Please repair the profile!

thank you.

 

Hi, Lofgreno95,

There is absolutely no way to help you with problems like this unless you attach your full log that shows the problem.

Ref: [Guide] How to attach your log​

cheers,
chinajade

 

Hi, Zinzin0,

There is no way to help you without a full log. If you'd like to attach one, we'll have a look.

Ref: [Guide] How to attach your log​

cheers,
chinajade

 

Hi, Mirko1987,

The log you attached did not show that. There is no way to analyze a problem which we can't see. The proper log gives us this visibility.

cheers,
chinajade

 

If you need something more, msg me.

 

Hi, Zinzin0, and thanks for the log,

You are on a Beta build of Honorbuddy. Beta builds break things, and they have obviously broken the UserSettings behavior. (Which hopefully will be repaired before they drop the beta as a release).

Please replicate your problem on the Released version of Honorbuddy. If you continue to have a problem after that, post a fresh log, please.

You may also want to report this issue to the Honorbuddy Beta thread, so they know they've broken something.

cheers,
chinajade

 

Good Morning!
First of all I'd like to explain that I am new to honorbuddy. I have successfully launched and configured everything from my understanding. I've been searching through the threads as to what might be causing this issue but ultimately I might need some insight.

I am going through the common issue of a profile starting and continuously interacting with an NPC to get a quest it already has, to remedy this I followed the deleting cache method to no conclusion. I have also gone through my drivers and all are up to date. Another thing to note is I am using the BETA client of honorbuddy, latest release. I'm not overly positive what Kicks profiles policy is on supporting the beta releases.

Attached you will find me log, please let me know if I have done this correctly.
First error reads at [14:26:14.151 D] for a quick search.

Thank you for the support.

***EDIT***
After further investigation and looking at the beta forums users problems logs I have determined this is likely to do specifically with the beta build. If you could confirm this that would be awesome, otherwise disregard the edit. Thank you.

 

All I can say is that it's best not to use the beta when you're new to HB.
I know that doesn't help much, but honestly, download the operational release.

At this moment the devs are in the middle of this upgrade to WoW 5.2, so be patient and wait until they publish any release greater than 535.
The 535 is not working with the current WoW patch.

Happy botting

 

ChinaJade, Kick;

A quick question, after clearing the cache and everything the bot seems to go back to npc's that I have already finished their quests.
It seems the bot can not confirm which quest are already done and to move on from then in the profile.

Can you confirm this if its correct ?

Thanks

 

If you would have attached a LOG, then people would be able to analyse that behaviour ..
So restart HB, change the LOG-settings to Diagnostic and try again. Then attach your log to your post.

Happy botting

Oh, and if you're using Singular, also activate the (debug) combat log in the settings.

 

Morning Aetheric,

I appreciate the feedback and although I am new to honorbuddy, I do have good experience with past bots that are no longer with us...RIP ... I think I figured out the issue per other players logs.

Looking forward to seeing what the community has to offer and what I have to offer for it. I honestly shouldn't have started HB on a patch tuesday before a major patch release

Thanks again for the reply!

 

In the latest HB release it flies to the quest giver and tries to pick up the same quest over and over, not sure if this is a profile needing update issue or an issue with the new HB but I'll post it here for now.