HB ARCHIVES: Kick's Old Posts Thread--DO NOT DELETE!

Hi, Thegoldstandard,

Alas, neither of the logs captures the problem you describe.

Your problem sounds like a corrupted cache. Please carefully follow the information contained in this article to resolve the problem:

HelpDesk: Cache corruption problems​

cheers,
chinajade


[size=-2]Ref: Thegoldstandard's original post w/log[/size]

 

Hi, Elviszhenda,

As stated in the first post of this thread, we are unable to assist you with problems unless you attach the full log that captures the issue.

Ref: [Guide] How to attach your log​

cheers,
chinajade

 

Hi, Jaxlad, and thanks for the log.

Your Honorbuddy installation seems to be having serious issues. I'd try correcting the problem with a 'clean install'. Instructions here:

HelpDesk: "Clean installing" Honorbuddy​

If that doesn't have you on your way, please follow up to the Support forum with a fresh log. As, your issues are not related to Kick's profile pack.

cheers,
chinajade



[size=-2]Ref: Jaxlad's original post w/log[/size]

 

Hi, Ivanho1122,

Many thanks for the log, and *all* the details telling us what you've tried.

Alas, there is nothing else to be tried at the moment. The Tanaris and Feralas zones are new to the profile pack, and are still being flowed. Once the flow is complete, I believe proper checkpoints will be revisited.

So, your options for now are to

• Grin and bear it.
  The detour is just a few hours.
  
  
• Find another profile pack that closer suits your needs.

cheers,
chinajade


[size=-2]Ref: Ivanho1122's original post w/log.[/size]

 

Hi, BobbleFixture,

Alas, your log has been heavily edited, and we'll be unable to assist you with the problem.

If you are able to replicate the problem, and attach the full log, please feel free to try again.

cheers,
chinajade


[size=-2]Ref: BobbleFixture's original post w/heavily edited log[/size]

 

Hi, Crazy008, and many thanks for the logs!

Your logs are filled with these:

[06:53:31.527 D] System.AccessViolationException: Could not read bytes from 4BF3BB54 [299]!​

This means that Honorbuddy is unable to reliably communicate with the WoWclient. Honorbuddy is unable to determine mob position, health, and other critical information.

You will need to make a post into the Support forum to get this issue resolved. The problem is not an issue with Kick's profile pack.

But before you make that post, I'd try these two things...

• Switch your Combat Routine back to Singular and see if that will make the problem go away.
  
  
• Do a 'clean install' of Honorbuddy. Full instructions here:
  
  HelpDesk: "Clean installing" Honorbuddy​

cheers & good luck,
chinajade

[size=-2]Ref: Crazy008's original post w/logs[/size]

 

Hi, MaxMuster, and many kudos for paying attention, and double-checking!

Its *always* safe to copy Kick's QBs on top of a distribution--whether they were 'cleaned out' or not.

You can find more information here:

HelpDesk: Updating Singular and Quest Behaviors between Honorbuddy drops​

cheers,
chinajade

 

Hi, Morx,

None of the attached logs capture the issue you describe.

I'll hazard a guess that your caches are corrupt. You can find the remedy for the situation in this article:

HelpDesk: Cache corruption problems​

cheers,
chinajade


[size=-2]Ref: Morx's original post w/logs[/size]

 

Hi, Daddy006 and ElvisZhenda,

Anytime you ask for help with issues like this, you must attach the full log that captures the issue. Without such a log, we've no way to analyze the problem.

Ref: [Guide] How to attach your log​

cheers,
chinajade

 

Hi, Dred, and many thanks for the log.

Your Honorbuddy installation is damaged. It appears you have duplicated some quest behaviors while copying quest behaviors from a third-party source.

The easiest way out of this situation is to do a 'clean install' of Honorbuddy:

HelpDesk: "Clean installing" Honorbuddy​

Please be careful when copying quest behaviors from third-party sources into your Honorbuddy installation.

If you continue to have issues, please make a follow-up post to the Support forum, and attach a fresh log. Your problem has absolutely nothing to do with Kick's profile pack.

cheers,
chinajade


[size=-2]Ref: Dred's original post w/log[/size]

 

Having a realy anoying problem with questing profile hyjal 80-82 but i Think this is for every profile sence it started in the end of 68-80 profile when a horde kills me (fkn anoying btw fkn blizzard cross server bullshit) I die and usually It just go back to the corpse and keeps questing as It should right, but now it cant find the corpse ''cant locate corpse trying spirit healer instead'' I get ress sickness for 10 min and thats just waste of time and sence you die alot becuse of this fkn cross server thing its really waste of exp.. NOTE that this started after the latest SVN update i did about 1 day ago or so.

[11:36:40.700 D] We died, Clearing current POI
[11:36:40.700 D] Cleared POI - Reason Player Died
[11:36:40.700 D] Cleared POI
[11:36:40.966 D] Activity: Releasing from corpse
[11:36:40.966 D] Activity: Releasing corpse
[11:36:40.967 N] I died!
[11:36:41.027 D] Activity: Releasing from corpse
[11:36:43.656 D] Activity: Moving to corpse
[11:36:43.731 D] Activity: Loading Tile/s
[11:36:43.731 D] Loading Kalimdor_37_23
[11:36:43.804 D] Activity: Moving to corpse
[11:36:47.469 N] Can't navigate to our corpse. Trying the spirit healer instead! Corpse Point: <5462.655, -2323.551, 1461.274>
find this in the log. this have happened lots of times..

 

Hi, Ricdec, and thanks for the log!

It appears neither of the issues you report is related to Kick's profile pack.

First, for some obtuse reason, it looks like Honorbuddy decided to actively target and kill the guard (i.e., it was not 'body pulled' by your toon):

[15.31.15.429 D] Activity: Setting K3 Bruiser at 3 yards as your target
[15.31.15.945 D] Changed POI to:Type: Kill, Name: K3 Bruiser​

Second, Honorbuddy decided it couldn't get back to your corpse, so it chose to rez at the spirit healer instead:

[15.31.25.429 N] Can't navigate to our corpse. Trying the spirit healer instead! Corpse Point: <6151.647, -1069.614, 402.6866>
[15.31.25.492 D] Could not generate path from {6403.705, -1174.276, 455.8986} to {6427.388, -1185.505, 447.447} (time used: 0 milliseconds) @ FindStartPoly​

Neither of these are issues with the profile pack. Instead, these should reported as issues to the Honorbuddy Release thread.

cheers,
chinajade


[size=-2]Ref: Ricdec's original post w/log[/size]

 

Hi, Poontego123, and many thanks for the log!

[15:47:26.881 N] [Compiler Error]: c:\temp\Honorbuddy 2.5.7350.638\Quest Behaviors\Quest Behaviors\InteractWith.cs(387,22) : error CS0102: The type 'Honorbuddy.Quest_Behaviors.InteractWith.InteractWith' already contains a definition for 'QuestFrameDisposition'​

You have incorrectly copied the quest behaviors provided by Kick's profile pack into your Honorbuddy installation. You have managed to duplicate--rather than replace--the Quest Behaviors/ directory, and this is what is causing your problems.

Please delete your c:\temp\Honorbuddy 2.5.7350.638\Quest Behaviors\Quest Behaviors\ directory, and try again to copy the Quest Behaviors from Kick's profile into your Honorbuddy installation by carefully following the instructions here:

HelpDesk: Updating Singular and Quest Behaviors between Honorbuddy drops​

cheers,
chinajade


[size=-2]Ref: Poontego123's original post w/log[/size]

 

Hi Vastator, thank you for the log and report!

From your log entries, it looks like there are meshing issues:

[02:11:28.718 D] Could not generate path from {-3026.611, -6806.573, 146.4158} to {-3908, -6786, -1.636955} (time used: 0 milliseconds) @ FindStartPoly
[02:11:28.953 N] Moving to Type: QuestTurnIn
[02:11:29.015 D] Could not generate path from {-3025.456, -6802.106, 140.5764} to {-3908, -6786, -1.636955} (time used: 0 milliseconds) @ FindStartPoly
[02:11:29.281 N] Moving to Type: QuestTurnIn
[02:11:29.328 D] Could not generate path from {-3024.221, -6797.327, 132.4055} to {-3908, -6786, -1.636955} (time used: 0 milliseconds) @ FindStartPoly
[02:11:29.578 N] Moving to Type: QuestTurnIn
[02:11:29.625 D] Could not generate path from {-3023.07, -6792.876, 123.0064} to {-3908, -6786, -1.636955} (time used: 0 milliseconds) @ FindStartPoly​

...which would obviously not be a profile problem.

Alas, this is not something that can be 'changed blindly', and we'll have to wait until we can get a toon back into the area to see what is going awry.

To be honest...
your problem may be solved quicker if you also report it to the Navigation thread.


@Kick, can you confirm meshing issue next time you get a toon through this area?


[size=-2]Ref: Vastator's original post w/log[/size]

 

Hi, Mario27, and many thanks for the report and log.

It looks like you were questing fine until the last log entries where Honorbuddy just hangs:

[07:52:49.496 D] Activity: Loading Tile/s
[07:52:49.496 D] Loading Expansion01_26_31
[07:52:49.575 D] Loading Expansion01_26_32
...<end of log>...​

The correct profile directives are being issued, but Honorbuddy appears to just stop executing the profile (or doing any work at all).

This issue should be reported to the Release thread, as it is obviously not a problem with Kick's profile pack.

cheers,
chinajade


[size=-2]Ref: Mario27's original post w/log[/size]

 

Hi, Hellobeary,

This is par for the course for the bored children on PvP servers. Some zones (like Hyjal) have gotten very very bad since the cross-realm stuff went into effect--level 90s going to level 80 and below zones just to grief questing people. Maybe things will settle down again when school starts again later in the year.

As for the "navigating to corpse issue", its because Honorbuddy can't calculate a path to the corpse from the graveyard:

[11:36:47.469 N] Can't navigate to our corpse. Trying the spirit healer instead! Corpse Point: <5462.655, -2323.551, 1461.274>
[11:36:47.534 D] Could not generate path from {4990.218, -2617.934, 1450.698} to {4950.52, -2668.52, 1429.163} (time used: 0 milliseconds) @ FindStartPoly
...
[11:37:18.393 D] Could not generate path from {5073.776, -2525.237, 1502.002} to {4950.52, -2668.52, 1429.163} (time used: 0 milliseconds) @ FindStartPoly
[11:37:18.461 N] Can't navigate to our corpse. Trying the spirit healer instead! Corpse Point: <5462.655, -2323.551, 1461.274>​

The profile is not running at this point, and there is absolutely nothing the profile can do about the situation. Also, with no path to the corpse, Honorbuddy is making the correct decision to use the spirit healer instead.

These are just inconveniences you agreed to endure when you select a PvP server.

cheers,
chinajade


[size=-2]Ref: Hellobeary's original post w/log[/size]

 

the PvP server thing is no Point discussing with you so anyway Is there nothing you can do fix the problem or are you guys working on it? never had this problem Before that update so it must have been someting you guys done.

 

Hi again, Hellobeary,

No further discussion is required.

We've already told you the answer--the profile is NOT RUNNING while you are dead. Those decisions are in the HBcore. Thus, the issue is not with Kick's profile pack.

We've also explained that the reason HBcore made the decision to use the Spirit Healer is because a path could not be calculated from the graveyard back to your corpse.

Everything is running as HBcore designed it.


cheers,
chinajade


[size=-2]Refs:

Hellobeary's original post w/log
Chinajade's reply
Hellobeary's follow-up requesting confirmation
​

[/size]

 

ye i did the 3 quest my self im not a self quester i hate it but now its running fine again

 

Just a suggestion but, for the dread wastes, was meant to be leveled from 89-90, not townlong. Soo, basically Blade Fury kills me every single pull. Since the mob does not move during blade fury, maybe have the bot move 5 yards behind the mob, that way you will never get hit? Is this even possible for you? Would be sweeeet! And gl, thanks