[Plugin] randomBuddy (to random generate gather profiles)

ok my bad. so apparently somehow the SVN or my mistake made the plugin go to .5 version when it is at .8 haha. tys for the help though

 

roboto your the best and I wont lie and really appreciate your help I have probably asked so many personal questions but I am glad you helped!

EVERYONE DONATE TO ROBOTO HE IS DOING A NICE JOB CONTRIBUTING! THE GUY NEEDS BEERS FOR MORE CODING!

 

where and how do i get a new key plz

 

In wintergrasp, there is a saronite ore under the bridge. Bot will go back and forth till blacklist. X="4559.606" Y="2833.054" Z="359.0451"

 

Srsly people.

what these guys do is great!

donate to them! least you can do

 

blacklisted, thanks

 

Hey! Can anyone write what i should write in "save box" So its saves in plugin folder?

 

In Dread Wastes / Townlong Steps: This three Spots are not good for low equipped miner / herb bots. Big groups that will be pulled at:

<Blackspot X="-286.9871" Y="2816.354" Z="151.5532" Radius="42.18138" />
<Blackspot X="-347.819" Y="2653.104" Z="164.2611" Radius="47.3514" />
<Blackspot X="1025.862" Y="2486.397" Z="322.8841" Radius="66.10062" />

The result is, that the bot dies very often and rescue all the time in new mob-packs and dies and dies and.... yes die

 

thanks really interesting plugin!

I am getting errors though which cause HB to shut down. The profile is loading ok, the bot is running like it should, but I get the error HB window with the "send - Dont send" buttons.
Tried a new HB installation in new folder, with only this plugin enabled.

This is the log

View attachment 5724 2013-08-25 13.21.txt

 

added, thank you

 

View attachment 102345

This is the HB error, which with some googling seems that it is relevant with the profile? Dunno. Tried on Howling Fjord and Ashenvale, same results.

Hopefully there is a solution, but thanks for all your work anyway, appreciated!

 

cant open attachment :/

 

+1000

 

for some reason the bot goes to this location in 4 winds - X="-7.563999" Y="-4.708918" Z="217.1918" /> and then it just goes afk... not sure if profile related or not, but runs fine untill it gets to that spot :>
and same with X="13.65367" Y="-1.658553" Z="208.6148" /> .......... just goes afk? any idea what would cause this, never seen it before

Hmm no matter where i start the bot, it simply flies to these locations (picks herbs/ores on the way) then just afk's in the air on said location...

OK. I start the bot in dread wastes, i have selected a profile for only dread wastes, yet it flies into 4 winds and goes afk here <Hotspot X="-0.6925428" Y="15.44366" Z="198.5624" />

added a log

 

this is it I hope know you can see it

imgur: the simple image sharer

 

which zone?
what are your settings?

 

Same error on Howling Fjord and Ashenvale. Default settings (new HB installation on new folder), no other plugins enabled, default CR.


In fact, just to be sure, I just downloaded Honorbuddy again right now, no other plugins, didn't touch the HB setting or the randomBuddy setting, just loaded a Burning Steppes profile through the plugin. The bot started like it should, and the error popped up again. Also went to Searing Gorge, same thing happened.

I attach the log of the new installation again, maybe it helps.
View attachment 2964 2013-08-26 16.59.txt

I must add that before and after the error, honorbuddy window is fully functional, it doesn't stuck or anything. I can stop the bot, load a new profile and use it like normal.

 

Hi Roboto,

i have two error the last two days. First, when RB recieves a new profile I get an XML-error:

[randomBuddy] Refreshing Profile...
[randomBuddy] Using host rndbuddy.tk
[randomBuddy] New Profile received.
[randomBuddy] Loading Profile...
XML Error: Das Attribut "X" des Wertes "" wird nicht unterst?tzt. Erwartet wird Schwimmend type - On line 42 - [X=""]
XML Error: Das Attribut "Y" des Wertes "" wird nicht unterst?tzt. Erwartet wird Schwimmend type - On line 42 - [Y=""]
Du hast das Attribut ?Z? vor das Attribut ?X? und ?Y? gesetzt!
XML Error: Attribut X von Schwimmend fehlt im "Blackspot" Kennzeichen. - On line 42 - [<Blackspot X="" Y="" Z="" />]
XML Error: Das Attribut "X" des Wertes "" wird nicht unterst?tzt. Erwartet wird Schwimmend type - On line 47 - [X=""]
XML Error: Das Attribut "Y" des Wertes "" wird nicht unterst?tzt. Erwartet wird Schwimmend type - On line 47 - [Y=""]
Du hast das Attribut ?Z? vor das Attribut ?X? und ?Y? gesetzt!
XML Error: Attribut X von Schwimmend fehlt im "Blackspot" Kennzeichen. - On line 47 - [<Blackspot X="" Y="" Z="" />]
XML Error: Das Attribut "X" des Wertes "" wird nicht unterst?tzt. Erwartet wird Schwimmend type - On line 81 - [X=""]
XML Error: Das Attribut "Y" des Wertes "" wird nicht unterst?tzt. Erwartet wird Schwimmend type - On line 81 - [Y=""]
Du hast das Attribut ?Z? vor das Attribut ?X? und ?Y? gesetzt!
XML Error: Attribut X von Schwimmend fehlt im "Blackspot" Kennzeichen. - On line 81 - [<Blackspot X="" Y="" Z="" />]
?ndere aktuelles Profil zu Random Profile z2 13-08-27 03:22 (69d7045af82c732b1942b7b5be3a7d51)
[Gatherbuddy2]: Ein neues Profil wurde ausgew?hlt. Wegpunkte werden aktualisiert.

Second, my two bots ignores all vendors and does not sell or repair. After dying the equipment goes yellow (and it ignores the vendors several hours). Then sometimes the equipment goes full red and the bot dies repeatedly.

The vendors are in the recieved XML-file:

<Vendors>
<Vendor Name="The Metal Paw" Entry="61749" Type="Repair" X="1769.724000" Y="372.217000" Z="478.263800"/> <!-- 2F094C5F-E2DC-D76F-EA56-F2FEB5FE7608-2A34ABD6EBBD7FCF5A4421229C946C0A z:2 f:0 -->
<Vendor Name="Whetstone" Entry="59403" Type="Repair" X="3069.950000" Y="787.380200" Z="527.449800"/> <!-- 6CEBFE45-BDB4-55AA-8064-C52F403CC6CD-98C7242894844ECD6EC94AF67AC8247D z:2 f:0 -->
<Vendor Name="Ironshaper Shou" Entry="59827" Type="Repair" X="3042.047000" Y="1245.347000" Z="654.309300"/> <!-- 7C3DB3AF-D7DF-9C52-F871-927EAF3C2C13-347665597CBFAEF834886ADBB848011F z:2 f:0 -->
<Vendor Name="Fixxit Redhammer" Entry="61520" Type="Repair" X="1849.729000" Y="2070.549000" Z="455.470500"/> <!-- C639C80F-7E7D-BE6E-EC39-7D464E382AF3-0EFBE98067C6C73DBA1250D2BEAA81F9 z:2 f:0 -->
</Vendors>

I tried to select / deselect the option "find vendory automatically" with no result. It seems to be a plugin-error?

Thanks for you help!

 

this has been fixed

 

i took the time to test them by myself, all working proper
please post the out.xml file if you encounter issues