Hi, Mr_Xm2, and thanks for the log. From the log, it looks like the profile is working as intended. The WoWclient is indicating that the Sha vengeur will aggro on you, if you approach Ur-Bataar. So the profile is clearing the Sha vengeur that will aggro first, so you won't be fighting two mobs at once. From the log, you stopped the bot as the profile was carrying out this tactic. cheers, chinajade [size=-2]Ref: Mr_Xm2's original post w/log[/size]
Hi, Aaron913, and thanks for the logs, [07:50:32.053 D] Goal: UseItemTargetLocation: "Hot Lava" [07:51:03.582 D] Activity: Moving to location [07:51:03.633 D] Activity: Loading Tiles [07:51:03.633 D] Loading Kalimdor_34_27 [07:51:03.815 D] Successfully generated path from {2613.604, -1199.896, 140.0146} to {2613.855, -1197.812, 139.908} in 188 milliseconds [07:51:04.036 D] Activity: Moving to location [07:51:12.162 N] Stopping the bot! Sadly, the log stops right as we could see what might be going wrong. So, we're unable to provide assistance with this problem as the log shows nothing wrong. As far as the navigation issue, its not uncommon to get stuck on low hanging tree branches and such. Please report the issue to the Navigation thread. They will need both the location, and a screenshot of the incident to see what type of repair to the mesh is needed. cheers, chinajade [size=-2]Ref: Aaron913's original post w/log[/size]
Hi again, Wullie, and thanks for this. I've captured the FlyTo behavior issue to Known Bugs List: Miscellaneous (Rep, Seasonal, etc). Will try to visit it after the next Honorbuddy release (but dunno when that will be). Also, very nice find on the coordinate issue! The Deepholm profile has been updated in v2807. cheers, chinajade [size=-2]Ref: Wullie's problem report and recommended fix[/size]
Hi, Virus2001 and many thanks for the log. Your Honorbuddy installation is showing signs of cache corruption. Please follow the instructions in this article for getting the problem cleared up: HelpDesk: Cache corruption problems cheers, chinajade [size=-2]Ref: Virus2001's original post w/log[/size]
Bot has been questing fine up until now. Currently lv 44 on ele shaman using Singular routine. I have also tried other routines. Out of the blue whenever aggroed the bot just targets the mob, runs to it, and stands. It has stopped attacking for some reason. I have tried reinstalling honorbuddy, and updating singular.
Playing as feral druid level 46.... won't attack anything for some reason been trying to get it to work all day have tried all basic steps, updating profiles, reinstalling honorbuddy, etc. NOTHING it's really annoying.... I attached the log.
Hi, Natesniper, and thanks for the log. [09:23:41.591 D] Failed to properly land and dismount in 15 seconds. Forcing a dismount. ... [09:23:42.052 D] Failed to properly land and dismount in 15 seconds. Forcing a dismount. ... [09:24:11.491 D] Flushing timed movement. Direction: Descend [09:24:11.491 N] MoveStop failed for Descend ... [09:24:11.555 D] Failed to properly land and dismount in 15 seconds. Forcing a dismount. ... [09:24:11.940 D] Failed to properly land and dismount in 15 seconds. Forcing a dismount. ... [09:24:39.328 D] Flushing timed movement. Direction: Descend [09:24:39.328 N] MoveStop failed for Descend [09:24:39.426 D] Stop and dismount... [09:24:39.426 D] Failed to properly land and dismount in 15 seconds. Forcing a dismount ... ...<continues>... I've no clue what's going on, but your Honorbuddy installation is having serious issues. These types of problems are not caused by the profile. You're losing a lot of time because Honorbuddy is unable to move about the zone correctly. Your Honorbuddy is having problems communicating with the WoWclient. This is probably the root cause of your problem: [09:22:59.330 D] System.Exception: Only part of a ReadProcessMemory or WriteProcessMemory request was completed, at addr: 00000820, Size: 336 at GreyMagic.ExternalProcessMemory.ReadByteBuffer(IntPtr addr, Void* buffer, Int32 count) ... [09:33:01.105 D] System.Exception: Only part of a ReadProcessMemory or WriteProcessMemory request was completed, at addr: 00000820, Size: 336 at GreyMagic.ExternalProcessMemory.ReadByteBuffer(IntPtr addr, Void* buffer, Int32 count) ... [09:58:57.937 D] System.Exception: Only part of a ReadProcessMemory or WriteProcessMemory request was completed, at addr: 00000820, Size: 336 at GreyMagic.ExternalProcessMemory.ReadByteBuffer(IntPtr addr, Void* buffer, Int32 count) ... [10:04:16.754 D] System.Exception: Only part of a ReadProcessMemory or WriteProcessMemory request was completed, at addr: 00000820, Size: 336 at GreyMagic.ExternalProcessMemory.ReadByteBuffer(IntPtr addr, Void* buffer, Int32 count) ... [10:05:01.685 D] System.NullReferenceException: Object reference not set to an instance of an object. at Singular.Helpers.Unit.UnfriendlyUnitsNearTarget(Single distance) in c:\Users\Natan\Desktop\Bots\Honor Buddy\Routines\Singular\Helpers\Unit.cs:line 353 ... [15:53:27.242 D] System.Exception: Error while writing Memory! at GreyMagic.ExternalProcessMemory.WriteByteBuffer(IntPtr addr, Void* buffer, Int32 count) The only way I know to 'fix' this is to try restarting Honorbuddy and the WoWclient. If no joy, try rebooting your machine. If you continue to experience problems like this, please make a post into the Support forum with a fresh log. Your problems are not related to the profile pack at all. cheers, chinajade [size=-2]Ref: Natesniper's original post w/log[/size]
Hi, R?kwon, and thanks for the report and log. We're glad things are somewhat smooth for you—we wish that were true for everyone. Aye, Dalaran gives the flying navigator problems due to some invisible 'zoning' boundaries around the city, and the geometry of the city hovering in the air above the actual zone. This is a navigational issue, and not a profile issue. If you'd like to report it, the appropriate location would be the Honorbuddy Bug Reports thread. The issue with 'needlessly moving between continents' is a consequence of the way Honorbuddy implements auto-chaining of profiles. To prevent this happening, rather than loading the [Fly][H - Quest] BC 58-70 [Kick].xml profile, instead load the Hyjal profile (since you're level 80), and let it start auto-chaining from there. cheers, chinajade [size=-2]Ref: R?kwon's original post w/log[/size]
Hi, Woogygoof, As discussed in Reporting Problems or Seeking Assistance, "stuck" issues have absolutely nothing to do with the profile, and should not be reported here. If you would like specific problems repaired, please report the issues to the appropriate locations as described in the article. Just a warning... a general complaint of 'stuck' will be ignored by the navigational team—they need specific instances. cheers, chinajade
Hi, DonSleza4e, It will only buy a mount if Honorbuddy reports that you don't already have mount, and the appropriate riding skill. My guess is your Honorbuddy installation is having issues, but we'd need a log to analyze the problem. cheers, chinajade
Hi, Pyroman515, and thanks for the log. This issue is a problem with the Combat Routine. You might try upgrading your copy of Singular and see if that will repair the issue. If not, just do the quest by hand and turn it in. The problem with not attacking yellow-named mobs is addressed in the FAQ. cheers, chinajade [size=-2]Ref: Pyroman515's original post w/log[/size]
Hi, Wullie, Yes it does! Thanks again. The change has been folded into v2808. cheers, chinajade [size=-2]Ref: Wullie's problem report and recommended repair[/size]
Hi, MaxMuster, and many thanks for this! Indeed, that must have been incredibly annoying after an Honorbuddy stop/start. We've commented out the line for now in v2809. We didn't qualify it with an <If> because an appropriate condition wasn't readily apparent. cheers, chinajade [size=-2]Ref: MaxMuster's problem report w/log[/size]
Hi, Pasterke, You're right, the mailbox section called out by the profile was very thin. In v2810, we've added all non-phased mailboxes that are available, and reworked the <Vendors> section for Alliance. Unfortunately, I don't have an appropriately-leveled Horde toon to do it for their side at the moment. cheers, chinajade
Hi, Wullie, In v2811, the mailing is not forced. However, there is a high probability that toons will immediately return to unload at this pair of mailboxes which will trigger the bug anyway. And you're right, we've very unhappy about having to do this. But, there is no reason to aggravate the bug any more than necessary. cheers, chinajade
Hi, Shoop, Thanks for trying, but partial logs are useless for diagnosing problems. As clearly stated in Reporting Problems or Seeking Assistance, we'll need the full log if you actually want help. cheers, chinajade [size=-2]Ref: Shoop's original post w/unusable log[/size]
Hi, R?kwon, For your issue in Tanaris... you are suffering from problems with the RocketRescue behavior. The problem has been repaired, and should be available in the next Honorbuddy release. Please read this response to see the work-around until the next Release is made available. For "Bears Up There"... [09:07:38.142 D] (Climb Up) no movement UP occurred [09:07:42.511 V] [Singular] [WoWRedError] You can't do that right now. [09:07:42.526 V] [Singular] [WoWRedError] You can't do that right now. ... [09:29:47.510 D] (Chuck-A-Bear) threw bear at trampoline [09:29:55.732 V] [Singular] [WoWRedError] You can't do that right now. [09:29:55.745 V] [Singular] [WoWRedError] You can't do that right now. [09:29:55.734 N] [Singular-DEBUG] [CombatLog] SPELL_CAST_FAILED Dragon Roar#118000 failure: 'You can't do that right now.' Something is interfering with the behavior that is trying to complete the objectives of this quest. I don't know what could be causing the interference. I've captured the issue to Known Bugs List: Cata 80-85, and we'll have to look at it, the next time we get a toon back through the area. To get you going again, please do the quest manually. If its a behavior problem, its going to take a complete rewrite which will be a while. cheers, chinajade [size=-2]Ref: R?kwon's original post w/log[/size]
Hi, R?kwon, For the first issue, I believe Honorbuddy has repaired the "collect" form of the <Objective> directive. If so, then in the next release Honorbuddy will fight the mobs it body-pulls while collecting things rather than ignoring them. For the second issue, I've seen Honorbuddy do this on several occasions—it seems to stop executing the profile, and the idleness eventually causes the toon to log out. I've no explanation for it, and can't even tell you if the problem has been repaired since it happens so sporadically. There are no work-arounds for either issue at the moment. cheers, chinajade [size=-2]Ref: R?kwon's original post w/log[/size]
Hi, McDuric, and many thanks for the log! You are suffering from problems with the RocketRescue behavior. The problem has been repaired, and should be available in the next Honorbuddy release. Please read this response to see the work-around until the next Release is made available. cheers, chinajade [size=-2]Ref: McDuric's orignial post w/log[/size]