HB ARCHIVES: Cava?s Profiles--DO NOT DELETE

When you interact with the game its supposed to stop. You should be able to type and look at one open menu at a time if the character is not turning in a quest/accepting.

If you click off the game (have it in windowed mode) it will resume with no issues.

 

Nope, mine will stop completely, also I get random "We are stuck!!" red errors, randomly while its running and not stuck?

EDIT: attached new file

 

What's your hardware?

Also -

Did you follow the instructions? Make sure you use the CAVA_STARTER_PROFILES.XML - Be sure to reload HB after an update as well.

 

hi pr0cl1v1ty
you have some problems with your instalation, i dont know what is it, probably its better to you report your issues at Honorbuddy Support theres is nothing i can do for help you, isnt an profile related issue, other users run same profiles without problems

[00:18:11.855 N] Changing current profile to [H-Quest] (23-26) Ashenvale [Cava] $Rev$:
[00:18:21.863 D] Exception in DoString: Process must have frozen or gotten out of sync: InjectionFinishedEvent was never fired StackTrace: at GreyMagic.Executor.Execute(Int32 timeout)
at GreyMagic.Executor.Execute()
at Styx.WoWInternals.Lua.DoString(String lua, String luaFile, IntPtr pState)
[00:18:31.872 D] Exception in TraceLinerocess must have frozen or gotten out of sync: InjectionFinishedEvent_was_never_fired - at GreyMagic.Executor.Execute(Int32 timeout)
at GreyMagic.Executor.Execute()
at Styx.WoWInternals.World.GameWorld.
(WoWPoint , WoWPoint , Single , CGWorldFrameHitFlags , WoWPoint& ) - GreyMagic

 

REALLY NICE Plugin! And love your questing profile, it run smooth to warth for horde without getting stuck ext. omg LOVE this profile

But then i came to warth. no more profiles So forced to use kicks profiles, and they get stuck so mutch and bug ALOT. sad face.

but when will your horde warth profiels be out ?

 

Hi obb

some profiles are at test status, they are almost ready to public release.

Right now im working at:
fixing the reported issues to Netherstorm profile (will be in public release next days)
scripting the Sholazar Basin for test/debug
scripting/improving the anti-stuck routine to help Cava Armageddoner's users to avoid report/bans.

all of this need time to be near (something good), you must understand, i do this for fun and to improve my knowledge, i have family and job, and i can only take care of this project when this 2 allow me, so far i think i can manege all 3, but... at end you just need wait, when ready and ASAP will release all stuff

 

Hardware.

i7-3770k
16gig ddr3 1866
asus z77 sabertooth mobo
gtx 690 gcard
1tb hd
160g SSD

what else do you need to know?

Yes I followed instructions, I've re downloaded and uninstalled Honorbuddy multiple times/

 

Hello

I have a problems whit questing

I have be questing to levl 70 whitout any problems, and now I cant starte it Again in Northrend
So what am I doing wrong, I have update HB and Cava 410 and it still dont Work

Regards
Inotech

 

1)Are you drunk?

2)Profile isn't completely finished yet and doesn't support 68-85 currently.

 

1: No I am not drunk

2: Thx for your time to answer

 

Hmmm...

Hardware looks good, obviously looks like you have the load balanced. If not, you can put Honorbuddy on your SSD if its not already. I run WoW(s) off my SSD with honorbuddy running on the HDD(s) Run 3 WoW's on a machine normally. Honor grind!

i5 - 2500k o.c 4.16GHz
Asus H77
16GB Ram
560TI 448 Cuda
Samsung 840 SSD - 256GB
4 - 4TB HDD


Your log is filled with stuff - anyway you could load up a fresh HB (under a new folder preferably on a separate drive - DO NOT INSTALL CAVA YET!
Configure bot config (not really needed, one setting)
Then class config. Select the options and change and values that you feel are required for your needs. Click save & close.
Now time to configure the Plugins.
I select: Anti Drown(no changes necessary)
AutoEquip2 (Configuration required - make sure to read carefully) Quite a few values should be changed to optimize.
LogMeOut! (I do not recommend until Cava is working well. (Sometimes I still get random stucks every so often and HB does bug out and need to be restarted because of mesh issues every so often) Minimal effort is required. My warrior just hit 80 (started on the 16th - quite a bit of time logged out as well to be safe)
Refreshment Detection (You dont need to change much - unless a non mana class)
Talented2 (Make sure to select the class and spec you would like to be save and close)
Now for Cava - Check the CavaProfiles box and hit save, save, save, etc. Be careful not to change any paths. It will require multiple updates, and a restart. Make sure to select the correct profile under Cava_Starter_Profiles.xml - It will require more restarts as you go on. Make sure to completely close the program.
Once everything is showing green you should be good to go. Press start and watch something else periodically checking on the system.

I know this is a lot to do, but trust me it is worth it once its going. Kick's is good, however it is a little risky. Use it for 68-75 and restart Cava IMO.

It took me about ~6 hours to figure it all out and get it rolling top notch with help from other users.

Let me know,

E

 

[Compiler Error]: c:\Users\God's Gift\Documents\Honorbuddy\Quest Behaviors\Cava\UseElevator_NoJump.cs(90,17) : error CS0246: The type or namespace name 'ConfigMemento' could not be found (are you missing a using directive or an assembly reference?)
[Compiler Error]: c:\Users\God's Gift\Documents\Honorbuddy\Quest Behaviors\Cava\UseTransport2.cs(90,17) : error CS0246: The type or namespace name 'ConfigMemento' could not be found (are you missing a using directive or an assembly reference?)
[Compiler Error]: c:\Users\God's Gift\Documents\Honorbuddy\Quest Behaviors\Cava\VehicleCanSelfHeal.cs(79,17) : error CS0246: The type or namespace name 'ConfigMemento' could not be found (are you missing a using directive or an assembly reference?)
Errors in quest behaviors!
WHAT IS GOING ON, ive cleaned install and installed the new plugin like it says

 

Manually finish the quest if you can. Restart from there.

Also follow my above directions to the T and it should work 100%

 

[InteractWith-v719(warning)] Use of Brogg's Totem interrupted.
[InteractWith-v719(warning)] Use of Brogg's Totem interrupted.
[InteractWith-v719(warning)] Use of Brogg's Totem interrupted.
[InteractWith-v719(warning)] Use of Brogg's Totem interrupted.
[InteractWith-v719(warning)] Use of Brogg's Totem interrupted.
[InteractWith-v719(warning)] Use of Brogg's Totem interrupted.
[InteractWith-v719(warning)] Use of Brogg's Totem interrupted.
[InteractWith-v719(warning)] Exceeded our maximum count(7) at attempted interactions--blacklisting Firemane Scout for 3m00s

 

New HB have some internal changes and some behaviors dont work
because that CavaPlugin find that error and cant update himself, go to:
c:\Users\God's Gift\Documents\Honorbuddy\Quest Behaviors\Cava
right click Cava folder and select update

 

It says 1-90 but every time I go to start the bot (I'm level 75) it just pops up and says this profile is in development or something along those lines and stops :S?

 

If you read the fine print it only does 1-68 then 85-90 I believe for Alliance and 85-88 for Horde. The other levels are in development.

 

I don't know what is causing this. Fresh install of both HB and Cava was working fine last night

 

Hi, Microwattz,

You didn't do a 'clean install', as you think you did. Please follow the instructions in this article:

HelpDesk: "Clean installing" Honorbuddy​

cheers,
chinajade

 

I recently got a new computer but whenever i try to get the SNV of this it does not work. It say snot responding and if i jsut let it run it eventually says the connection has timed out. Can somebody maybe just give me a ZIP file of this please.