trash

Hey guys, 2 days ago, I had to be taken to the hospital in an ambulance. Apparenyly I have a bad kidney infection. For the next week or so, I will be relaxing and trying to get back on my feet. I will get back to work on my projects as soon as my wife allows me back on my comp.

 

Ru speaking? xDD

 

Well my toon just stand arround until i make him invis - than he run all this code-makros, moving arround and target every mob BUT he don?t pickpoting them. I tried it with Singular and TuanHas-Routine.

Nothing special in the diagnostic log.. i actually tried to reinstall honorbuddy some times. Always the same effect - just run arround, targeting everyone and refuse to steal from them. I already have the glyph.

Code:

[QDBG] Starting behavior Bots.Quest.QuestOrder.ForcedCodeBehavior.
Goal: NoCombatMoving to <-2964.618, 848.3817, 8.509074>
Activity: Moving To Location - X: -2964.618 Y: 848.3817 Z: 8.509074
Activity: Finished!
[QDBG] Done with forced behavior Bots.Quest.QuestOrder.ForcedCodeBehavior.
[QDBG] Starting behavior Bots.Quest.QuestOrder.ForcedCodeBehavior.
Goal: NoCombatMoving to <-2963.74, 852.2065, 8.528234>
Activity: Moving To Location - X: -2963.74 Y: 852.2065 Z: 8.528234
Activity: Finished!
[QDBG] Done with forced behavior Bots.Quest.QuestOrder.ForcedCodeBehavior.
[QDBG] Starting behavior Bots.Quest.QuestOrder.ForcedCodeBehavior.
Goal: Running Macro
[RunMacro-v501(debug) @line 390]: Running macro 3 times
Activity: RunMacro 1/3 Times
[RunMacro-v501(debug) @line 390]: Running macro 3 times
Activity: RunMacro 2/3 Times
[RunMacro-v501(debug) @line 390]: Running macro 3 times
Activity: RunMacro 3/3 Times
[QDBG] Done with forced behavior Bots.Quest.QuestOrder.ForcedCodeBehavior.
[QDBG] Starting behavior Bots.Quest.QuestOrder.ForcedCodeBehavior.
Goal: Running Macro
[RunMacro-v501(debug) @line 391]: Running macro 1 times
Activity: RunMacro 1/1 Times
[QDBG] Done with forced behavior Bots.Quest.QuestOrder.ForcedCodeBehavior.
StyxWoW.AreaManager.CurrentGrindArea is null
[QDBG] Done with forced behavior Bots.Quest.QuestOrder.ForcedIf.
[QDBG] Starting behavior Bots.Quest.QuestOrder.ForcedIf.
[QDBG] Done with forced behavior Bots.Quest.QuestOrder.ForcedIf.
[QDBG] Starting behavior Bots.Quest.QuestOrder.ForcedIf.
[QDBG] Starting behavior Bots.Quest.QuestOrder.ForcedCodeBehavior.
Goal: NoCombatMoving to <-2961.202, 848.3281, 7.928573>
Activity: Moving To Location - X: -2961.202 Y: 848.3281 Z: 7.928573
Activity: Finished!
[QDBG] Done with forced behavior Bots.Quest.QuestOrder.ForcedCodeBehavior.
[QDBG] Starting behavior Bots.Quest.QuestOrder.ForcedCodeBehavior.
Goal: NoCombatMoving to <-2958.548, 842.4279, 6.919496>
Activity: Moving To Location - X: -2958.548 Y: 842.4279 Z: 6.919496
Activity: Finished!
[QDBG] Done with forced behavior Bots.Quest.QuestOrder.ForcedCodeBehavior.
[QDBG] Starting behavior Bots.Quest.QuestOrder.ForcedCodeBehavior.
Goal: NoCombatMoving to <-2954.818, 834.9505, 4.608669>
Activity: Moving To Location - X: -2954.818 Y: 834.9505 Z: 4.608669
Activity: Finished!
[QDBG] Done with forced behavior Bots.Quest.QuestOrder.ForcedCodeBehavior.
[QDBG] Starting behavior Bots.Quest.QuestOrder.ForcedCodeBehavior.
Goal: NoCombatMoving to <-2950.687, 838.7468, 3.742104>
Activity: Moving To Location - X: -2950.687 Y: 838.7468 Z: 3.742104
Activity: Finished!
[QDBG] Done with forced behavior Bots.Quest.QuestOrder.ForcedCodeBehavior.
[QDBG] Starting behavior Bots.Quest.QuestOrder.ForcedCodeBehavior.
Goal: Running Macro
[RunMacro-v501(debug) @line 402]: Running macro 5 times
Activity: RunMacro 1/5 Times
[RunMacro-v501(debug) @line 402]: Running macro 5 times
Activity: RunMacro 2/5 Times
[RunMacro-v501(debug) @line 402]: Running macro 5 times
Activity: RunMacro 3/5 Times

 

Hey there, I'm just curious how you guys handle the 5 instances per hour limit. Any suggestions or tips with boosting in regards to that?

 

WHAT!? Damn. Sorry to hear that.
Rest up, take your time!

This looks really nice though I might have use for this one day.

 

rest is more important than anything else, get better first.

G

 

We use a 12 minute and 30 second instance timer. The bot won't exit the instance until the time has elapsed.

 

Yesterday, Wigglez and I RAFed some toons together. I am currently leveling mine to level 10. We hope to get started on a rewrite soon. Wigglez is now proficient at making plugins and custombehaviors. We expect to make the next release of Symbiotic much better. Keep in mind, I have many projects I am working on and Wigglez has a life, all things in due time.

 

Nice.

 

Rest dude ffs! Teach me how to code and i would gladly help you out!

 

I have some Raf accounts to level up, done 2 by hands literally.

This still working well or need waiting you fixing something Bot?

thx in advance.

 

Actually leveling 2 accounts - after 1 Day and 10 H they have Level 72 ... works nice

 

Hey im at the blackrock depths part and the booster keeps running into a wall about halfway through, ive attached the log

 

BRD is the only problematic profile I had. The reason it does that is the profile getting too close to the shadowforge lock and clicking it as it passes through. This opens the door between West/East Garrison but also closes the dark iron highway gate. The bot doesn't go into the east garrison, so clicking it serves but purpose but to prevent it from moving further.

The other issue is passing the ring of law, it cuts some VERY narrow corners going down to the dark iron highway. Sometimes you end up falling into the lava. The two major falling points are passing out of the ring of law the first bridge, going past the fire elemental boss, and on the way down past fineous.

The BRD profile isn't really "AFKable" because of these problems. I'd suggest removing going into the alcove by the shadowforge lock, you miss 1-2 packs but remove the risk of clicking the key. Also have the profile skirt outside when going past lava to avoid HB clicking itself into lava.

 

Just started to use this, 1 lvl 90 (Hunter) and 1 lvl 10 (Pala - Retri). Doing Deadmines; actually working very well. The Hunter does need >10 minutes to clear all, so that's fine. Sometimes he misses a mob (or 2), and my follower dies. This happens every 3 runs or so. Not a problem per se; but the dead follower keeps standing at the spirit healer and my booster just continous clearing the Deadmines. My follower stays dead forever. I then stop HB, walk him in, start HB (follower walks out and in again) and all continuous as normal.
So far it works very nice, not AFK'able though.
I did make the mistake of letting my Hunter auto-use Feign Death. I can really not advise that, and you probably can see why
I can say though, that this is really slow compared to questing if you do not have RAF. The XP per hour for the lvl 10 is really low (I dinged 11 after more than an hour!!), so only use this while RAF'ed (triple XP).
Otherwise... way too slow. 22 xp per mob is what I get (not rested, no guild bonus) and questing is WAY faster.
Still, nice work and keep it up!
The main problem I have with this is with AutoEquip2. What a weird piece of software that is... my Retri Pala prefers gear with... INTELLECT... :/ "looted item does not have our primary stat of Intellect, so rolling greed".... REALLY? Retribution pala = Intellect? Weird stuff

 

Well it does say its for RAF boosting in the very first post...
Also you can adjust AutoEquip for stats.

 

I highly suggest everyone leveling from level 1 adds the following line to their Deadmines run.

Code:

<Hotspot X="-194.4162" Y="-491.7165" Z="53.61798" />

This will grab the annoying mob which my booster ALWAYS misses. This is added inside the "<!-- Clearing the cave bunny + monkey room -->" section. For example, and I've added it here:

Code:

						
					<!-- Clearing the cave bunny + monkey room -->
					<RunTo X="-189.784" Y="-467.1871" Z="54.14226" />
					<RunTo X="-188.2088" Y="-477.5831" Z="54.04776" />
					<RunTo X="-193.7357" Y="-491.501" Z="53.59171" />
					<RunTo X="-194.4162" Y="-491.7165" Z="53.61798" />
					<RunTo X="-188.2225" Y="-501.9361" Z="52.63238" />
					<RunTo X="-173.4403" Y="-503.5245" Z="54.3697" />
					<RunTo X="-158.6151" Y="-506.9561" Z="53.33582" />
					<RunTo X="-151.9234" Y="-519.7235" Z="52.64346" />
					<RunTo X="-148.083" Y="-530.6323" Z="50.72704" />
					<RunTo X="-155.5192" Y="-523.9391" Z="51.84337" />
					<RunTo X="-157.7648" Y="-509.6339" Z="53.32336" />
					<RunTo X="-172.3126" Y="-504.9801" Z="54.03728" />
					<RunTo X="-183.1392" Y="-494.7179" Z="53.77271" />
					<RunTo X="-185.4037" Y="-479.5077" Z="54.04181" />
					<RunTo X="-187.618" Y="-489.5293" Z="54.04743" />
					<RunTo X="-191.561" Y="-503.5848" Z="53.07443" />
					<RunTo X="-202.0434" Y="-501.9697" Z="53.64309" />
					<RunTo X="-206.5777" Y="-506.1066" Z="51.77118" />
					<RunTo X="-217.6303" Y="-502.1198" Z="50.72357" />
					<RunTo X="-218.6082" Y="-497.679" Z="48.9954" />
					<RunTo X="-221.0848" Y="-488.52" Z="48.67664" />
					<RunTo X="-220.3154" Y="-487.7871" Z="48.71264" />
					<RunTo X="-228.4447" Y="-485.8205" Z="48.69048" />
					<RunTo X="-234.746" Y="-487.5258" Z="48.54272" />
					<RunTo X="-243.1284" Y="-482.5194" Z="48.82872" />
					<RunTo X="-257.6659" Y="-482.5565" Z="49.44861" />	

Better safe than sorry eh? However I kept missing it, bundle the new hotspot into an update for newbies please.

Cheers ~

 

I will make changes to this today.

As well as the Cave Bunny in Deadmines.

 

Hello!
Am I wrong to believe that this profile requires a "booster"?
My friend and I are going to level up with RaF together, but will both start at level 1; does the bot support this kind of leveling - like queue'ing up for dungeons together at level 15?
If not, do you have any alternative ways of effectively leveling two accounts up at the same time without a booster?

Thank you!

 

No.