[PAID] [Warlock] Demonic - An Advanced Honorbuddy Warlock Routine [PvE/PvP]

With latest version I am still getting a double chaos dump when I hit cap. Probably because of a) my 350ms latency b) having only anti-lag #1 enabled??? Is it fixable? Otherwise running great! Just bad on the pooling when it double dumps and I got into dark soul with 1.x embers instead of 2.x because it dumped an extra one.

 

i think just to take anti-lag stage 2 on and anti-lag stage 1 off is better.

 

With that I get a delay between casts which is much worse then losing an ember here and there. That works fine when my latency is low.

 

yeah i have most of the time 30 ms

 

I do when I'm playing in my normal location.

[07:47:37.516 N] [Demonic] [HP: 100] [Mana: 83.8] [Embers: 4] [Casting: Chaos Bolt] [On: Raider's Training Dummy @ 99.9%]
[07:47:39.510 N] [Demonic] [HP: 100] [Mana: 83.8] [Embers: 4] [Casting: Conflagrate] [On: Raider's Training Dummy @ 99.9%]
[07:47:39.934 N] [Demonic] [HP: 100] [Mana: 100] [Embers: 3] [Casting: Immolate] [On: Raider's Training Dummy @ 99.9%]
[07:47:42.900 N] [Demonic] [HP: 100] [Mana: 88] [Embers: 2] [Casting: Conflagrate] [On: Raider's Training Dummy @ 99.9%]
[07:47:43.916 N] [Demonic] [HP: 100] [Mana: 93.2] [Embers: 2.1] [Casting: Incinerate] [On: Raider's Training Dummy @ 99.9%]

Double chaos cast may just be when I hit 4 embers. Going to try and lower my cap from 3.5 to 3.2 or something and see if I can make it so I don't hit 4. Still an issue though.

Edit #2: Nope still happens even below 4 embers but at / above cap. Doesn't happen always, just like half the time.

Add a check to prevent that and I'll be a very happy dude. Great work on all the additions, hope everyone is happy with the dps

 

I wish it was still in the hundreds. I stopped counting at 1000 hours a few months back.

It's a bug with Honorbuddy affecting the free version. It's also impacting Insanity (my Shadow Priest) routine too. I've reported the issue to the developers, so need to wait for them to push an update.

There's code specifically in there to not cast 2x Chaos Bolts in a row if the reason is only to burn embers (i.e. it says if our ember count is over x, and our last spell cast was not Chaos Bolt, then we can cast it).

How are the embers dropping in that log snippet when it's not logging out Chaos Bolts ? I'm a little confused by that one. I've not seen the double cast Chaos Bolt issue for a few weeks now.

 

Not sure, will make a full log in a sec after building to four embers.

 

Ideas / Questions:

Is there a chance to cancel "blood horror" if a warrior with spell reflect is coming close?
And stop cast other spells if a warrior enables spell reflect? Like fear for example?

CR is casting Souldwell in Arena. Is there an option to configure that?

Haggy

 

[10:48:08.680 D] Set query filter to Horde
[10:48:14.462 D] Tyrael Pause pressed.
[10:48:19.594 N] [Demonic] [HP: 100] [Mana: 96.4] [Embers: 2.8] [Casting: Berserking] [On: Raider's Training Dummy @ 100.0%]
[10:48:20.229 N] [Demonic] [HP: 100] [Mana: 100] [Embers: 2.8] [Using Item: Gloves of the Horned Nightmare]
[10:48:20.235 N] [Demonic] [HP: 100] [Mana: 100] [Embers: 2.8] [Casting: Immolate] [On: Raider's Training Dummy @ 100.0%]
[10:48:20.235 V] [Demonic] [DoTManager Added - Immolate] [Int:23996] [SP:42413] [Crit:22.80254] [Haste:0.8427356] [Mast:38.73666]
[10:48:21.301 N] [Demonic] [HP: 100] [Mana: 100] [Embers: 2.8] [Casting: Conflagrate] [On: Raider's Training Dummy @ 100.0%]
[10:48:22.010 V] [Demonic] [DoTManager Added - Immolate] [Int:26012] [SP:42413] [Crit:23.59822] [Haste:0.7022797] [Mast:38.73666]
[10:48:22.692 N] [Demonic] [HP: 100] [Mana: 86.8] [Embers: 3] [Casting: Conflagrate] [On: Raider's Training Dummy @ 100.0%]
[10:48:23.743 N] [Demonic] [HP: 100] [Mana: 94.6] [Embers: 3.1] [Casting: Incinerate] [On: Raider's Training Dummy @ 99.9%]
[10:48:24.790 N] [Demonic] [HP: 100] [Mana: 100] [Embers: 3.1] [Casting: Incinerate] [On: Raider's Training Dummy @ 99.9%]
[10:48:26.237 N] [Demonic] [HP: 100] [Mana: 86.5] [Embers: 3.2] [Casting: Incinerate] [On: Raider's Training Dummy @ 100.0%]
[10:48:27.289 N] [Demonic] [HP: 100] [Mana: 88.7] [Embers: 3.5] [Casting: Incinerate] [On: Raider's Training Dummy @ 100.0%]
[10:48:28.680 N] [Demonic] [HP: 100] [Mana: 84.1] [Embers: 3.6] [Casting: Incinerate] [On: Raider's Training Dummy @ 99.9%]
[10:48:29.739 N] [Demonic] [HP: 100] [Mana: 84.5] [Embers: 3.8] [Casting: Chaos Bolt] [On: Raider's Training Dummy @ 99.9%]
[10:48:31.184 N] [Demonic] [HP: 100] [Mana: 85.2] [Embers: 3.9] [Casting: Incinerate] [On: Raider's Training Dummy @ 99.9%]
[10:48:31.683 N] [Demonic] [HP: 100] [Mana: 88.6] [Embers: 4] [Casting: Chaos Bolt] [On: Raider's Training Dummy @ 100.0%]
[10:48:33.751 N] [Demonic] [HP: 100] [Mana: 100] [Embers: 3] [Casting: Immolate] [On: Raider's Training Dummy @ 100.0%]
[10:48:33.751 V] [Demonic] [DoTManager Added - Immolate] [Int:23996] [SP:42413] [Crit:22.80254] [Haste:0.8427356] [Mast:38.73666]
[10:48:34.331 N] [Demonic] [HP: 100] [Mana: 100] [Embers: 3] [Casting: Conflagrate] [On: Raider's Training Dummy @ 100.0%]
[10:48:36.295 N] [Demonic] [HP: 100] [Mana: 96.1] [Embers: 2.2] [Casting: Immolate] [On: Raider's Training Dummy @ 99.9%]
[10:48:37.334 N] [Demonic] [HP: 100] [Mana: 100] [Embers: 2.2] [Casting: Incinerate] [On: Raider's Training Dummy @ 99.9%]
[10:48:38.999 N] [Demonic] [HP: 100] [Mana: 95.4] [Embers: 2.2] [Casting: Incinerate] [On: Raider's Training Dummy @ 99.9%]
[10:48:39.571 D] Tyrael Pause pressed.
Any thoughts? Latency is about 350 right now

This is with Stage 1 Enabled and Stage 2 disabled. No delay between casting but maybe it's breaking something in the spell queue'ing order?

Happens 100% of the time standing still casting.

Edit: With Stage 1 Disabled and Stage 2 Enabled it casts correctly BUT I have a fairly big delay between casts.

 

i have a better idea so if the warrior pop his reflect better cast fel flame or waiting 6 sec? .fel flame remove that reflect faster

 

latency is to high tbh 350 ?? i dont think there is something to help

 

Maybe there is nothing to be done and I stick it out for another few weeks until I am home with low latency. However, I'm sure I am not the only one with higher latency and if the throttling can be tweaked to allow both fast casting with higher latency and correct queue'ing it will help people. It can do both currently, just not both at the same time

 

My bot doesnt seem 2 respond to trash or any other mob in the game only boosses?

 

What are some good settings to tweak for BG's? It seems pretty functional at default.

 

i run the bot and it does nothing.... it was working earlier today

 

i did like using this bot i would like 2 purchase the better versioon but it will not do any roatioon otherr then summon my pet/buff nothing else on any mob

 

Starting the bot!
Currently Using BotBase : Raid Bot
Changing current profile to Empty Profile
[Demonic] [HP: 100] [Mana: 100] [Casting: Summon Felhunter] [On: Mage]
Stopping the bot!
Bot stopped! Reason: User pressed the stop button
Bot stopped! Reason: Auth Session is invalid
Session is invalid!

what is it!?

 

Can anyone recommend some good dot manager settings for affliction on heroic siegecrafter blackfuse? Dpsing on ground floor , not the belts.

 

Just pushed an update which better takes into account latency (stage #2). Update and have a go now, let me know how you get on.

I think this is a better idea tbh. I'll add it to the to-do list.

 

The default file is decent. Try disabling curses too (or change to enfeeble on healers only).

Load the auralist.xml file into the advanced tab too.

Have you got a full log file?

Make sure you reload the bot after changing spec. The "Auth Session is invalid" message is an Honorbuddy one, nothing related to the routine.