HB ARCHIVES: Honorbuddy Profile Pack--DO NOT DELETE!

Hi, Brandon7219,

This is not a profile issue.

What is kept/sold/mailed is controlled by ForceMail.xml and Protected Items.xml. You should find this article enlightening:

Honorbuddy: About ProtectedItems and ForceMail - Buddy Wiki​

The other thing that could be going wrong, is you've a WoWclient addon or a plugin (like Mr.ItemRemover) that you've misconfigured.

If you need assistance resolving the problem, you should make a new thread in the Support forum. And, you must attach your full log that captures the issue.

Ref: [Guide] How to attach your log​

cheers,
chinajade

 

Hi, Tumbum, and thanks for the log and screenshot.

We've reworked Coup de grace in v3144 to address the following issues:

1. These mobs need one 'white attack' to kill. So a simple 'interaction' should do it.
   If not, we're in combat, and we'll finish them off normally.
   
   
2. If a pet get the killing blow, then toon gets no credit. IW should minimize this problem.
   Honorbuddy provides no communication mechanism between a profile and a Combat Routine. So, this change may be better, but it most likely going to have some 'misses', too.
   
   
3. We want to be dismounted the whole time we're doing this quest.
   Mobs are frequently underwater, and Honorbuddy is not good about dismounting above water, and it won't submerge if mounted on a flying mount while doing this quest.

cheers,
chinajade


[size=-2]Ref: Tumbum's problem report w/log[/size]

 

Trying to lvl my hunter and it's mounting up my drake in outlands near the "Forge Camp: Mageddon" quest objective.
The bot then overflies the area, lands, mounts my ground mount and runs through the lvl 60 MOBs agroing everything, getting knocked off the mount and dies.. rinse/repeat...
Here's two logs, I tried quitting WoW and HB and restarting / reloading the profile pack with the same result.. I interrupted the bot and ran manually to save my repair bill since I'd already watched it do this a few times..
I'm resorting to doing this part of the quest manually..

View attachment 121132
View attachment 121133

 

Hi again, Tumbum,

As always, thanks for the log and screenshot.

This was my fault. We failed to notice that InteractWith would see the boss as a mob that needed to be 'cleared' before attempting to use the portal. In v3145, we have turned off InteractWith's proactive clearing of mobs around the objective.

Hopefully, we've nailed it this time.

cheers,
chinajade


[size=-2]Ref: Tumbum's problem report w/log and screenshot[/size]
[size=-2]Ref: Our previous response to Tumbum regarding this quest[/size]

 

Hi, Merlin75, and welcome aboard.

We are very very confused as to how you are possibly getting to the Horde Kalimdor 40-45.xml profile. None of Kick's profiles chain through that one, as they all have ben incorporated into the main [H - Quest] 12-58 K-EK [Kick].xml profile.

Let's do a couple of things to try to clear up the problem.

• Please delete you local copy of Kick's profiles, and download it fresh.
  You can find the instructions here: Obtaining a Copy of the Profiles
  
  
• Let's assume the caches are corrupt and try clearing them.
  This article will assist you with that activity:
  HelpDesk: Cache corruption problems

If you are still not off-and-away, please show us a fresh log. Again, the profile you say is being chained to is 'dead'. We just got through searching the full profile pack to confirm that. So, something in your Honorbuddy installation, or local copy of Kick's profiles is seriously damaged.

cheers,
chinajade


[size=-2]Ref: Merlin75's original post w/log[/size]

 

Hi, Trobls,

It looks like your installation of Honorbuddy may be damaged. Please do a 'clean install'. This article will assist you with that:

HelpDesk: "Clean installing" Honorbuddy​

If you are not off-and-away, please attach your full log that captures the issue.

Ref: [Guide] How to attach your log​

cheers,
chinajade

 

Hi, Darkblasp,

If you need assistance, we simply must see the full log file that captures the issue. We are unable to analyze any problems without it.

Ref: [Guide] How to attach your log​

cheers,
chinajade

 

Hi, Kumoon,

Kmica is spot on. You are currently using a Test release of Honorbuddy, and things like this are to be expected.

The other point, is this is not a profile issue, and you should make a new thread in the Support forum regarding this issue. There, as here, a full log attached will be necessary in order for the staff to analyze the problem for you.

Ref: [Guide] How to attach your log​

cheers,
chinajade

 

Hi, Wywy,

The first step in problems like this are to try clearing the cache. This article will assist you with that endeavor:

HelpDesk: Cache corruption problems​

The next thing to consider, is doing quests manually sometimes substantially damages your quest state. This article explains how that happens, and what you can do about it:

HelpDesk: Quest giver is not offering expected quest​

If you are not off-and-away, you will need to attach your full log that captures the issue, so we can see what is going on for you.

Ref: [Guide] How to attach your log​

cheers,
chinajade

 

Hi, Randycruz,

If you need assistance, please see the guide for Reporting Problems or Seeking Assistance. Specifically, we must have the full log attached that captures the issue. Without it, we've nothing to analyze.

cheers,
chinajade

 

Hi, MantaHunter, and MANY thanks for the log!

If you are certain you have completed A Plea From Beyond - Quest - World of Warcraft, then you are suffering from a cache corruption problem. This article will guide you through the process of restoring it:

HelpDesk: Cache corruption problems​

If you still have problem after clearing the caches, please show us a full fresh log.

cheers,
chinajade


[size=-2]Ref: MantaHunter's original post w/log[/size]

 

Hi, Reww,

What you are describing is not a problem with the profile.

We will point you towards these two tools:

• ARelog - A Simple Free Relogger for Buddy Products
• HBRelog, an opensource relogger

If you continue to have problems, you should make a new thread in the Support forum, and you must attach the full log that captures the issue.

Ref: [Guide] How to attach your log​

cheers,
chinajade

 

Hi, Virus2001, and many thanks for the log.

This issue is not a problem with Honorbuddy and not the profile, and is addressed in this article:

HelpDesk: Honorbuddy can't find the quest-giving NPC​

If you locate the appropriate coordinates for the NPC, please share them. We can make modifications to the profile to hide the problem in the future.

cheers,
chinajade


[size=-2]Ref: Virus2001's original post w/log[/size]

 

Hi, Igoblin,

Your problem could be due to many reasons. Without a log file, we will be unable to analyze the problem or make corrections. In the future, please be certain to attach your full log file when reporting a problem.

Ref: [Guide] How to attach your log​

cheers,
chinajade

 

Great thanks, I'll try that... might be part of my other problem as well..

 

Hi Honormech, and many thanks for the log.

This issue is already captured in Known Bugs List: Cata 80-85.

cheers,
chinajade


[size=-2]Ref: Honormech's problem report w/log[/size]

 

Hi, Burningangel,

I've added the "Gray Kodo" to HB-507 ("Mounts not recognized by Honorbuddy").

The flying mount translates to "Green Vertokryl". I know its a bad Google translation, but I've no clue what this should be in English.

cheers,
chinajade

 

Hi, Merlin75, and many thanks for those logs!

In v3147, we believe the defect has been repaired.

Also, in the future, please turn off Buddycon2 and recreate the problem. Buddycon2 emits a lot of noise to the logs that make it very very difficult to analyze problems. Thanks!

cheers,
chinajade


[size=-2]Ref: Merlin75's problem report w/logs[/size]

 

Attempting Argent Tournament dailies.... [A - QO] Argent Tourny - Valiant (start) [Kick]

Changing current profile to [QO] [QO] Argent Tournament Rep - A [Kick] ($Rev: 2887 $)
Starting the bot!
Currently Using BotBase : Questing
[Singular] info: Pull Distance set to 100 yds by Questing, Plug-in, Profile, or User
[UserSettings-v1287(error)] Unable to locate setting for TrainNewSkills
[UserSettings-v1287(error)] Unable to locate setting for LearnFlightPaths
[UserSettings-v1287(warning) @line 87]: Attribute 'LearnFlightPaths' is not recognized by this behavior--ignoring it.
[UserSettings-v1287(warning) @line 87]: Attribute 'TrainNewSkills' is not recognized by this behavior--ignoring it.
[UserSettings-v1287(error) @line 87]: Stopping Honorbuddy. Please repair the profile!
Bot stopping! Reason: Profile has too many errors

 

Hi chinajade

I deleted all 4 chache-folders and waited at least 20min before I reloged into my account.
I still have the same problem.

Best regards