[PAID] BGFarmer - An Advanced Battleground Bot Base

I should have tried the trial before I purchased this. So far Its ok but not worth the price tag imo. Maybe it can be tweaked to be better, but I cant read half the options in the settings.

Also.. It tends to attack the same point over and over and gets into like 1v10 fights at the same point repeatedly. I dont have time to read through 40 pages of this thread. I want this to work and im sure its better than what ive experienced so far it just needs to be set up correctly.. but again its rather difficult to do that when you cant read most of the options.

 

Is it a feature or a bug: bot targets hunter's pets. I use it with a non-AFK routine (Vitalic) with targeting disabled.
And maybe targeting needs to be worked on, so it would be faster and maybe have more logic options.

 

I looks like you have turned up your DPI settings in windows? Maybe try and set them back to 100% and see if that helps.

 

So with chat just write it like this
Incoming %base% and it'll do the rest ?

 

Yep if you were to type in %enemies% inc %base% then as an example it would translate to:

3 in Lumber Mill

 

Idea: make BG behaviour dependent on a class. So if, you are a rogue - stealth @ resource race BGs to cap flags from stealth, if you are Druid - run for a flag on capture a flag BGs.
If you can tank - tank, if you are dps stay away from crowd, etc...
It's a simple description, but somthing like that would make a lot of progress in winning BGs.

 

I'll probably wait and see what Ashran is like - but I'm certainly not against the idea of adding it in. Falling off the top in LM isn't too much of a concern, people do it too. If anything it's more unlikely for a bot to fall of than not.

Still haven't found a solution to jumping down into the middle in ToK. It's on my list of things to fix/improve though. It's a limitation of Honorbuddy's navigation system - but I have ideas of how to work around it.

Need a log file for deserter - that shouldn't happen at all.

As halveismeg has said - looks like your DPI/accessibility options are enabled to increase font size above default. Try changing those to default/100% and see if it resolves your font issue. For attacking a node 1vs10 - I'd need a log file for this to see what happened.

It will target pets if it's the best option at the time (and varies depending on what class you're playing). As a melee, it will take a pet more often then what a caster will, as the pet will generally be a closer target. Targeting is traditionally handled by combat routines - BGFarmer just fills the gap. If I made targeting too aggressive, then it would start fighting with combat routines, and cause running back and forth behaviours.

 

Nice idea for something a bit further down the line, but would require full BG logic to be written for specific classes. Something I want to avoid at the moment due to the amount of time it would take. With WoD around the corner I need to balance time carefully to ensure there aren't delays at the expac.

 

deserter log file


View attachment 22156 2014-09-22 22.46.txt
View attachment 22644 2014-09-22 22.17.txt
View attachment 22188 2014-09-22 19.53.txt
View attachment 21776 2014-09-22 22.15.txt

 

22156 2014-09-22 22.46.txt - No deserter buff in here.

22644 2014-09-22 22.17.txt - No deserter buff in here.

22188 2014-09-22 19.53.txt - Deserter happened here. Looks like it wouldn't release from corpse. The bot kept attempting but it didn't happen - likely a wowclient issue.

21776 2014-09-22 22.15.txt - Deserter was already active here before the bot was started, so it detected the buff and logged out. Need to wait for the buff to go before clicking start if you've got logout on deserter active.

 

Hey man, loving the botbase, It works the best with pure rotation style pvp cr's like gladiator suite in my experience.
Some tips for USERS to get more human like behavior:
-Let BGFarmer handle all movement and targetting.
-Turn off the emotes, for god sake, half of the battleground is spamming emotes, it is really obvious.
-If you're playing a melee class, turn on "Strafe to move behind target", turn off "Turn on the spot" and enable "Random Strafing" This seems to hit a sweet spot where you move VERY human-like while in combat.
-When you first start BGFarmer, don't forget to load the blackspot file, Click "Import From File" and select the one file available

Some suggestions for MILLZ
-Pet targeting seems to be a tad too agressive at the moment, I often see my char wailing away on a hunter pet while the hunter is rather close. As I understand it these get a higher prio because they are closer, but most melee classes have a wide range of gap closers.
-Randomize the names of the defense points for incoming calls. For example: Farm|farm|frm or Water Works, ww, water. Real people generally don't take the time to write the exact name.
-I know this is mosly a cr thing but including use of pvp trinkets when cc'ed would be a cool option.
-There are still some issues with the gates in SotA but i'm sure you're aware of this.

 

How do I download once I have purchased?

 

it will load under your bot base after you buy it when you start hb

 

As halveismeg has said - looks like your DPI/accessibility options are enabled to increase font size above default. Try changing those to default/100% and see if it resolves your font issue. For attacking a node 1vs10 - I'd need a log file for this to see what happened.

This did not work.. It just made everything smaller but still cut off and jumbled up

 

Millz, out of curriosity, does grouping work cross realm?

 

Hi Millz! Thank your for creating a BG Botbase, as we all know the one that comes with HB sucks for months or years.

I just tried out your trial version and had some little issues. At Temple of Katmogu my toon (melee) runs to the middle where the big fight is. Around 5 enemy players run arround me and battle and my toon (not yet in fight) goes out of stealth, mounts up, rides a vew steps forward, dismounts, mounts up again, goes opposite direction and so on.

When he is ini Combat, he often just runs around, like if he couldn`t decide which enemy to attack. Or if there is only a single enemy he runs towords him, and just at the moment where it should attack, he turns around, walks away, turns around again, attacks, walks away.... This doesn`t happen all the time, but extremely often which makes it look very botlike.

I was using TuanHa routines at first with targeting and movement disabled, then I switched over to singular and It wasn`t much better. I used the melee settings in your botbase.

Andy Ideas? I can post a log later If necessary, its on my other computer. I really first want to get all this figured out before buying something :-D

 

Yo milz, really enjoy the BG botbase been working fantastic for me. Just one question,
How do i go about changing the mount that my character uses?

 

You can change that in the global HB settings. Not in the settings of the Botbase.

 

oh, i'm an idiot, thanks.

 

Hey

I'll reduce the volume of emoting that's done to help alleviate that issue. I'll improve the targeting to switch away from pets, and reduce the chance of selecting a pet in the first place.

Changing the names of bases for incoming will be (hopefully) in the next version.

Trinket usage would be better in a CR - I might add it in though.

SotA - Log files always help for this one, but yeah - aware of it.

Hey

Products purchased via the Buddy Store automatically load when you start Honorbuddy. The purchases are attached to your buddyauth account (and your Honorbuddy key) - so it does not require any login info.

• [Wiki] Enabling Streaming
• [Wiki] Accessing Products Bought From the Buddy Store
• [Wiki] Frequently Asked Questions
• [Video Guide] Using the buddy store, trouble shooting and streaming products

Cheers

What's your screen/monitor resolution set to?

Hmm it should do. Might need to include the server name in the leader name box - like 'BadWarrior-Silvermoon' etc.

Hey - For the indecisiveness, I'd need a log file with details as to where this happened in the log (preferably by stopping the bot after it happens). That way I can see what it was trying to do when the issue occured.

In combat movement stuff, I'll need a log file for that too.

Cheers