next time that happens, do a /reloadUI and confirm that it is in fact 0%, it glitches out sometimes and show the wrong numbers also check your settings, where it says mission success chance is set to 70 or w/e u want what do u need help with? almost everything is clickable so it will show a little description
This is a minor issue, so it's also easy to fix I spent a good 5-10 minutes looking for War Mill configuration, as my alt doesn't have any resources atm and I wanted to stop him from using them on work orders. Even if you play as a horde, it's called Dwarven Bunker in the config. Not sure if you can make it change based on faction, but you could always call it Bunker/Mill or something
Hi, I love the new gui but I have 2 small problems, my toon seems to always have difficulties entering the war mill, he gets stucked right after the entrance. And is it possible to have the option to craft the profession daily cd but not the "secret" that u use to buy recipe? Thanks
just rechecked. you were right. works fine. i had set to 56%, and it made 2 @100%, one at 66% and one at 87%. glad it was a ui issue.
I'm getting a bunch of Script Errors when I try to click the "Bot Config" button on the Lite version... it eventually opens the config window but only shows "GarrisonButler is loading..." and nothing happens... anyone else having this?
Hello Deams, justin. I wanted to say ... thank you. You put time for GUI mission and I hope that in future you will be faster, but the result is really good. You promised something simple, and you haven't lied. I find it much better than the competitor Keep up the good work and please be faster for the next steps I have a comment about the scale of the new interface, I think it's a little too big and should be reduced a little. And please, clean Trello for us to vote for the REAL new features, and not what people wanted there four months ...
Was just more of an exclamation about the endless possibilities... But I did kind of notice the problem with success rate as well. I set it to 85% and it seemed to pick up missions with a 35% succesrate. Was running via Teamviewer at the time and need to recheck when I get home.
I am also getting this. I thought I messed it up when I tried to change some settings during a HBrelog run. Did your errors start the same way? I tried a clean install and I still get the script errors.
GUI Bug: Moving Garrison Resources up in the GUI (Ex: change priority to 2) doubles the listing for "Garrison Resources". I haven't tried them all, but this is the only one I see so far.
Under what listing would the raid gear box missions be? EDIT: Nevermind, figured it out. It's the last 6 under the player gear category if you haven't moved them. EDIT2: I've caught it being stuck in a loop not starting a mission (assigned 2 followers to a 3 follower mission, then closed the mission and re-opened it again and again). I'll post a log if it should happen again as restarting fixed it. EDIT3: It happened again and I figured out the source. If I disable "Use Epic Followers to fill slots" it doesn't happen. I attached a log if you should want to see it. "Hapless Heroes" is the mission it got stuck on. EDIT4: More details are in this post
Deams, Justin, first impression after 5 minutes is: NICE! Seems excatly what I am looking for, functionality-wise. Now about the GUI. It is, WAY too large in my opinion. There is a lot of white space, big buttons etc. - Suggestion to make this a lot smaller, so it will fit my screen (1920x1200) without scrolling. - Another suggestion: Make the priority list editable with arrows (up/down), not only entering the number. - Another thing I noticed; I have 25 epic followers. It will then not do missions when this is selected: "Maximum number of Epic followers to boost" is set to 2, despite having selected that I want to do 100% missions. Maybe change the text a little? - Suggestion: I think there are too many options to prioritize now. ~140 ish. Probably this can be simplified? Who wants to specify (prioritize) the shoulder or wrist item he can have in a mission? This means you have to change this every time for your char, because once you have that item, you do not want to keep it a priority. IMO
A tutorial, please! I can't seem to get this to run my missions correctly. I see 100% missions for follower EXP, but for the life of me, I can't figure out why it won't run them. Full log attached + Config file (since it's easier to read). Nothing really looks wrong except it's saying the missions don't meet my requirements. View attachment Logs_Settings.zip
two small bugs i found sometimes bot dont use mining pick during gathering mine also stacks mine coffee - at this log it took 5 mine coffee - harvested all the things in mine and took for the last 3 ore the mine pick... heres a snapshot of the logfile [12:51:25.158 D] [GarrisonButler ICE] 2.4.12.0: [HBApi] Get item in bags: item=118897, #Found=1 [12:51:25.166 N] [GarrisonButler ICE] 2.4.12.0: [Item] Using: Minenarbeiterkaffee [12:51:25.364 D] [GarrisonButler ICE] 2.4.12.0: [HBApi] Get item in bags: item=118903, #Found=1 [12:51:25.366 D] [GarrisonButler ICE] 2.4.12.0: [HBApi] Get item in bags: item=118897, #Found=1 [12:51:25.367 D] [GarrisonButler ICE] 2.4.12.0: [HBApi] Get item in bags: item=118903, #Found=1 [12:51:46.970 N] [GarrisonButler ICE] 2.4.12.0: [Item] Using: Minenarbeiterkaffee [12:51:47.256 D] [GarrisonButler ICE] 2.4.12.0: [HBApi] Get item in bags: item=118903, #Found=1 [12:51:47.257 D] [GarrisonButler ICE] 2.4.12.0: [HBApi] Get item in bags: item=118897, #Found=1 [12:51:47.258 D] [GarrisonButler ICE] 2.4.12.0: [HBApi] Get item in bags: item=118903, #Found=1 [12:52:10.366 D] [GarrisonButler ICE] 2.4.12.0: [HBApi] Get item in bags: item=118897, #Found=1 [12:52:10.367 D] [GarrisonButler ICE] 2.4.12.0: [Item] AuraCheck: Miner's Coffee - current stack 2 [12:52:10.369 N] [GarrisonButler ICE] 2.4.12.0: [Item] Using: Minenarbeiterkaffee [12:52:10.515 D] [GarrisonButler ICE] 2.4.12.0: [HBApi] Get item in bags: item=118903, #Found=1 [12:52:10.518 D] [GarrisonButler ICE] 2.4.12.0: [HBApi] Get item in bags: item=118897, #Found=1 [12:52:10.519 D] [GarrisonButler ICE] 2.4.12.0: [HBApi] Get item in bags: item=118903, #Found=1 [12:52:30.648 D] [GarrisonButler ICE] 2.4.12.0: [HBApi] Get item in bags: item=118897, #Found=1 [12:52:30.649 D] [GarrisonButler ICE] 2.4.12.0: [Item] AuraCheck: Miner's Coffee - current stack 3 [12:52:30.651 N] [GarrisonButler ICE] 2.4.12.0: [Item] Using: Minenarbeiterkaffee [12:52:30.833 D] [GarrisonButler ICE] 2.4.12.0: [HBApi] Get item in bags: item=118903, #Found=1 [12:52:30.835 D] [GarrisonButler ICE] 2.4.12.0: [HBApi] Get item in bags: item=118897, #Found=1 [12:52:30.836 D] [GarrisonButler ICE] 2.4.12.0: [HBApi] Get item in bags: item=118903, #Found=1 [12:52:50.980 D] [GarrisonButler ICE] 2.4.12.0: [HBApi] Get item in bags: item=118897, #Found=1 [12:52:50.981 D] [GarrisonButler ICE] 2.4.12.0: [Item] AuraCheck: Miner's Coffee - current stack 4 [12:52:50.984 N] [GarrisonButler ICE] 2.4.12.0: [Item] Using: Minenarbeiterkaffee [12:52:51.189 D] [GarrisonButler ICE] 2.4.12.0: [HBApi] Get item in bags: item=118903, #Found=1 [12:52:51.194 N] [GarrisonButler ICE] 2.4.12.0: [Item] Using: Gut erhaltene Spitzhacke [12:52:51.395 D] [GarrisonButler ICE] 2.4.12.0: [HBApi] Get item in bags: item=118897, #Found=1 [12:52:51.397 D] [GarrisonButler ICE] 2.4.12.0: [HBApi] Get item in bags: item=118903, #Found=1 one other thing i saw at a lot of chars is following... [GarrisonButler ICE] 2.4.12.0: [Navigation] Moving to interact with Dalana Clarke [GarrisonButler ICE] 2.4.12.0: [ShipmentStart] Work order frame opened. [GarrisonButler ICE] 2.4.12.0: Failed to start a work order at Zwergenbunker. [GarrisonButler ICE] 2.4.12.0: Failed to start a work order at Zwergenbunker. [GarrisonButler ICE] 2.4.12.0: [Navigation] Moving to interact with Garnisonslager this happens nearly at every work order start since starting with all orders once... its not realy a problem cause it tries one or two times and contiue job... here is the log View attachment 732 2015-03-11 13.50.txt edit: dont use the defined amount of create work orders - instead hits the create all button. [13:48:29.752 D] Interacting with Dalana Clarke (Unit Id: 89065) [13:48:30.517 D] [GarrisonButler ICE] 2.4.12.0: [CapacitiveFrame] Opened. [13:48:30.517 D] [GarrisonButler ICE] 2.4.12.0: [Building] Refreshing Zwergenbunker, running=33, total=3 [13:48:33.784 D] [GarrisonButler ICE] 2.4.12.0: [Gossip] Returning ActionResult.Done due to IsGarrisonCapacitiveDisplayFrame() [13:48:33.784 N] [GarrisonButler ICE] 2.4.12.0: [ShipmentStart] Work order frame opened. [13:48:34.652 D] [GarrisonButler ICE] 2.4.12.0: [Building] Refreshing Zwergenbunker, running=6, total=30 [13:48:35.683 D] [GarrisonButler ICE] 2.4.12.0: [Building] Refreshing Zwergenbunker, running=0, total=36 [13:48:43.809 N] [GarrisonButler ICE] 2.4.12.0: Failed to start a work order at Zwergenbunker. [13:48:43.809 D] [GarrisonButler ICE] 2.4.12.0: Refreshing Zwergenbunker [13:48:43.811 D] [GarrisonButler ICE] 2.4.12.0: [GetMaxShipmentToStart,10]: maxSettings=8 maxInProgress=8 ShipmentCapacity=36 CanCompleteOrder=136 maxToStart=5 [13:48:43.883 D] [GarrisonButler ICE] 2.4.12.0: [Building] Refreshing Zwergenbunker, running=0, total=36 [13:48:45.153 N] (Singular) info: 126 seconds since GarrisonButler ICE BotBase last called Singular [13:48:53.832 N] [GarrisonButler ICE] 2.4.12.0: Failed to start a work order at Zwergenbunker. [13:48:53.832 D] [GarrisonButler ICE] 2.4.12.0: Refreshing Zwergenbunker View attachment 8660 2015-03-11 14.42.txt regards
I had this issue happen again even with "Use Epic Followers to fill slots" disabled, so I feel there is more to the issue than that. I've attached another log where it is disabled. I've also attached my settings file for help debugging (I've already censored out character names). EDIT: I disabled the options to "Keep" the treasure hunters and garrison resources along with the previously mentioned one and it hasn't cropped up again so far
Is there an Problem with accepting new Mission ins the Garrison? All my Toons just open the Mission Window but dont drop any Followers to the Mission.