• Visit Rebornbuddy
  • Visit Panda Profiles
  • Visit LLamamMagic
  • [PAID] KingWoW2 Priest

    Discussion in 'Priest' started by attilio76, Oct 18, 2014.

    1. getmunch

      getmunch New Member

      Joined:
      Sep 19, 2013
      Messages:
      426
      Likes Received:
      3
      Trophy Points:
      0
      Im not at my pc but its in the tab with all the routine settings.....about halfway down. Titled hotkey config or something similar.

      Its NOT utility tab for sure.....its the other one
       
    2. Blacknr1

      Blacknr1 New Member

      Joined:
      Dec 23, 2014
      Messages:
      71
      Likes Received:
      2
      Trophy Points:
      0
      I didn't write here for some time because I was busy being AWESOME!
      Now if you could implement one PoH linked with the archangel proc so we get the DA shields from the 100% crit.
      Pick the group with the same logic as selective shielding is already using.

      And after that I think there could be some clever use of PoM.
      If raid takes one big hit PoM wont help at all and will be waste of mana.
      But if all raid takes ticking damage it helps a lot.
      Is there any way to automate this?
       
    3. lynx123

      lynx123 New Member

      Joined:
      Sep 14, 2014
      Messages:
      34
      Likes Received:
      0
      Trophy Points:
      0
      Hiya Atillio, any chance you could add the option to pw:shield before dispelling? would be GREAT!
       
    4. Trazziana

      Trazziana New Member

      Joined:
      Jun 20, 2012
      Messages:
      2
      Likes Received:
      0
      Trophy Points:
      0
      Hey Atillio!

      First off, fantastic routine. I've been using it for the first few weeks of BRF and It's been working great. Thanks!

      However I'm not entirely sure how to set it up. I've just stepped into mythic and I've been dropping steadily in percentiles (rankings, I end up between 40-75 % most of the time)as we've been progressing through it. Would anyone care to share their settings that work well in mythic progression? I keep feeling like i should be able to pull alot more out of the routine (with my ilvl being 693) but i just can't get my head around on how to tune it perfectly. Any help would be appreciated.
       
    5. novicane

      novicane Member

      Joined:
      Dec 4, 2012
      Messages:
      65
      Likes Received:
      1
      Trophy Points:
      8

      Same, ive steadily falling back on rankings past few weeks, ive not touched my settings really since kagame on 1st page. Currently 5/10 mythic.
       
    6. attilio76

      attilio76 Well-Known Member Buddy Store Developer

      Joined:
      May 26, 2010
      Messages:
      1,858
      Likes Received:
      34
      Trophy Points:
      48
      Try enabll PoM on CD: (set hp to 100% and useonlyOnTank to false)
      If you mainly tank healing then take Clarity and mantain always up on tank (set hp to 100% on tank)
      If you are not only tank healing then use WordsOfMending and push hard with shield (set to 80% at least)

      Remember that i introduced a new option to disable use of athonement when archangel is up so if you will use this option ensure to increase the value for NormalHealing with heal at 95% for example.
      Remember to set correctly the T17 proc values (according to your mana pool)

      These tuning can bring you 25% more total healing.
       
      Last edited: Mar 31, 2015
    7. lolspeedo

      lolspeedo New Member

      Joined:
      Mar 31, 2015
      Messages:
      33
      Likes Received:
      0
      Trophy Points:
      0
      Thanks! I will try these out tonight. Would you recommend using kagame config? I'm 10/10H BRF @ 688 ilvl, usually hitting around 50k heeps (on blast furnace) and im not sure what else I should adjust, I've been using Clarity, butI think ill switch to WoM

      Is there any other settings you think I should change from kagame?

      It takes a lot for me to run out of manas nowadays.
      Lately though I have noticed around mid phase 2 of blast furnace my FPS sinks so hard (around 6-8) from 80+ .. I'm not sure why, I have enyo set to 15 .. will purerotation off make my hps drop?

      Any tips would be awesome, or if you have some settings I can download and try that would be great as well!

      Thanks again for a very very awesome CR. !!

      I really feel like I should be getting more than 49-50k hps .. especially on furnace/blackhand.
       
    8. Blacknr1

      Blacknr1 New Member

      Joined:
      Dec 23, 2014
      Messages:
      71
      Likes Received:
      2
      Trophy Points:
      0
      If you say you never run out of mana, then just enable shield spam on the whole raid.
      But for everybody else we have to manage our mana.
      To get the most healing possible with the mana we we have this is the prio.
      Atonement only for archangel.

      1. Shield set to 95.

      Atonement heal
      2. Penance 85
      3. Flash heal 50

      Normal heal
      2. Penance 90
      3. Flash heal 60

      cascade 80/5
      Holy nova 90/6
      PoH 85/4

      clarity only on tanks, 100.

      I experimented a lot with PoM but in the end I find it better to simply disable it.
      PoM works better with the holy build.
      I find I get the best total sustainable output without PoM.
      So I stick to the spells that benefits from mastery and then go all out on that.
      If you have more mana than needed, you could argue to enable it but i would rather cast some more PoH then.

      You will likely get higher hps with WoM talent but you are really just sniping heals from the other healers. So it wont help the raid.
       
    9. lolspeedo

      lolspeedo New Member

      Joined:
      Mar 31, 2015
      Messages:
      33
      Likes Received:
      0
      Trophy Points:
      0
      Thanks! I'll try these out. Do you recommend shield set to 95 even w/ mana issues? I have 1300 spirit, chewtoy (700ilvl) and it seems to proc quite a bit leaving me with decent mana at end of fights.. unless im spamming pw:s constantly. I keep ranking lower and lower though so I'm wondering how to improve that. I never stand in anything and my heals are always top. I will try out these settings!

      Recommended to just disable PoM?
       
    10. attilio76

      attilio76 Well-Known Member Buddy Store Developer

      Joined:
      May 26, 2010
      Messages:
      1,858
      Likes Received:
      34
      Trophy Points:
      48
      I love when my users doing some costructive discussions!
      Just wish to focus your attention on stats: CRIT VS MASTERY
      I think best throughput depends not only on fight type but also on wich talent stats you use.
       
    11. lolspeedo

      lolspeedo New Member

      Joined:
      Mar 31, 2015
      Messages:
      33
      Likes Received:
      0
      Trophy Points:
      0
      is mastery better if I'm using clarity?
       
    12. nelie223

      nelie223 New Member

      Joined:
      Jan 15, 2010
      Messages:
      316
      Likes Received:
      1
      Trophy Points:
      0
      I feel like im getting in game lag using this CR with Enyo. Anyone else?
       
    13. lolspeedo

      lolspeedo New Member

      Joined:
      Mar 31, 2015
      Messages:
      33
      Likes Received:
      0
      Trophy Points:
      0
      I am also on certain fights (blast furnace mainly.. around phase 2) 80fps to 10fps
       
    14. nelie223

      nelie223 New Member

      Joined:
      Jan 15, 2010
      Messages:
      316
      Likes Received:
      1
      Trophy Points:
      0
      i only get it in instances, my fps is still 70 at all times but the CR makes it seem slow.
       
    15. dethmold

      dethmold New Member

      Joined:
      Aug 23, 2014
      Messages:
      19
      Likes Received:
      0
      Trophy Points:
      0
    16. Blacknr1

      Blacknr1 New Member

      Joined:
      Dec 23, 2014
      Messages:
      71
      Likes Received:
      2
      Trophy Points:
      0
      The stats prio.
      Different spells benefits from different stats.
      The "problem" is that you need the crit to proc DA so you can benefit from mastery.
      Shield that crits benefits directly from mastery.

      The stat that seems to be overlooked is haste.
      Since CoW is a cast time it benefits from haste. And haste also gets buffed from borrowed time.

      Crit will make everything crit and also procs DA.
      But your PoH will have a 100% crit anyway first time every 30 sec from the archangel.
      Then we have penance that will be the major contributor to the DA procs.

      The problem is that when you are casting CoW or PoH, you are using time that could have been used casting instant shields.
      So we get a clear benefit from reducing time on those long cast-time spells.

      To me it looks like the better solution is to go mastery/haste and let crit be crit. We get crit from int anyway so we will still get them.

      Haste also allows you to be more reactive. Which helps save raid and tanks.
      And you want to finish your cast before you have to move from something.

      50k hps is good and you are not doing anything wrong if you get those numbers.
      It is more likely that your other healers are healing good too, thus there is no need to heal more.
      When raid drops and you start spamming PoH and shields you can get something like 65K but that is a manadrain.
      Just remember that you are by far the best tank healer and your job is to CoW/shield/penance the tanks and keep them alive. Then let shammy/holy/resto spam their hots on the raid.


      I see the other priest are all using spirit on weapon. While mr. Robot wants me to put mastery on it.
      I think it might be worth trying with a pure spirit trinket and then go mastery on the weapon.
       
    17. attilio76

      attilio76 Well-Known Member Buddy Store Developer

      Joined:
      May 26, 2010
      Messages:
      1,858
      Likes Received:
      34
      Trophy Points:
      48
      Yes you can share here your config.
      Specify pls if 2P or 4P bonus set
       
    18. stewiethecat

      stewiethecat Member

      Joined:
      Feb 4, 2011
      Messages:
      454
      Likes Received:
      0
      Trophy Points:
      16
      anyone have any holy settings for brf. I find myself going oom half way through fights.
       
    19. dethmold

      dethmold New Member

      Joined:
      Aug 23, 2014
      Messages:
      19
      Likes Received:
      0
      Trophy Points:
      0
      Mythic config !!

      - 4 set P " PVE".
      - Manual POS and PWB.
      - always prio Tanks.
      - This config for Disco Mastery priest
      - useing it with Enyo ( with Continues Healing Mode Enabled) and a pause key ofc!


      Enjoy!!!:rolleyes:
       

      Attached Files:

      Last edited: Apr 6, 2015
    20. dany51

      dany51 New Member

      Joined:
      Jul 4, 2012
      Messages:
      12
      Likes Received:
      0
      Trophy Points:
      0
      going to start trial today guys, anyone use it for PVP ? shadow or Discp ? just curious since i like to do both, i wanted to see what was everyone experience or anyone that does pvp. thanks !
       

    Share This Page