Hi Chasing, Run Auto Mode, you can set Raise Dead to True. It will auto raise your pet for you Set cooldowns to Boss Only, remember to enable Defile / DnD by enabling the setting. Good luck!
Hi daiborr48, I've modified this to change bear to melee range only. I'll make it spam only Faerie Fire if target isn't within melee range. New release will arrive sometime next week hopefully.
Hi, great works so far but it's still having issues in Boomkin I think. 1) Lunar empowerment priority does not works like it should I think. The CR still dump too many starsurges in solar when they could've been dump in lunar. For example, if there are 2 charges up when going from solar peak to lunar, the CR should keep both charges and do something like that : Wrath -> Transitional Starfire (we are now in lunar) -> Starsurge -> Starfire -> Starfire -> Starsurge -> (refresh dot) -> Starfire (We are now at 0 or 1 (2 if lucky) Starsurge charges and going in solar. 2) There should be an option to toggle charges save on the fly with a hotkey. So I could set to 0 at the begining (not having to manually weaves starsurges in opener) and change it during the fight. If I know that I will need some starfall for aeo in 15sec, I can then ask the CR to save them by pressing a hotkey. Same for cooldowns, if I know I will use celestial alignment in 20sec, I can ask the CR to save them the same way.
sad to say rogue subtlety broken still. actually it's exactly the same as it was many weeks ago when you replied it's a coding error. rogue 4 piece tier and 2 min trinket, and 3 min racial plus the 2 min shadow reflection. in auto mode shadow dance does NOT go off every 60 sec. over a long term average it's at best once every 2 minutes, which is ludicrous. i used to think it was just waiting for the other DPS CDs to come off cooldown, but that's not the whole answer since sometimes it will also not go off when they are available, and then suddenly trigger when reflection and trinkets are still on CD. also it tends to vanish like 3 sec before using SD which is a waste. as for (relatively) minor issues, rupture falls off for pretty extended periods of up to 5 sec, and sometimes it will vanish-prep-vanish again all at the same moment, thus wasting a vanish. the SD delay is connected to waiting for other CDs but like I said that's not the whole story since sometimes *everything* (SD, SR, Trinket) will be available but it still won't dance. I'm suspecting that maybe it's *also* waiting on vanish since for some inexplicable reason it likes vanish and only THEN shadow dance a few sec later (thus overwriting the vanish FW). Anyhow subtlety rogue is not playable atm. it USED to work fine of that I'm certain. Shadow dance has to go off as close to every 60 sec as possible, aligning with other 120 and 180 sec CDs when they are available but certainly not waiting for them. i have a log on training dummy and just ctrl-f "shadow dance" to see it triggering at totally random intervals like 2.5 min, 90 sec, 2.3 min etc. if you want it i can send it to you somehow but i decided to no longer upload logs here since it seems wildly insecure - if anyone at blizz makes the effort it seems it would take about 3 min of work to ID the exact toon involved just from the shitload of information that log includes (the exact spec and talents and race of rogue and exact times it was on a training dummy, etc)
Hi starlite68, Please ensure that you have Shadow Dance Pooling enabled, if for some reason you have disabled this then it's no wonder why it doesn't work at all. Please send me your latest log in PM so I can see that you have the correct settings enabled I just did a quick test on a 90 sub rogue with default settings, and it works perfectly fine. Even the pooling works as it should, so again send me your latest log in PM thanks.
OKay, Tryed the new version 1.0.0.9B so far it seems alot better for me then )A version. But still little low DMG on frost. Atm 660+ So I ask humbly again, can anyone please share there setup on Forst & Blood spec for DK, and same for PLD specs, Protection & Retribution. Want to test som more, but defently seems better now, Thanks in advance Xcesius Edit: I was in raide last night, and it keeps telling me "Not fully depleted runes in red text on screen" and It says in chat window with yellow text "Not in raid party"
I PM'd you a link to some logs - you can see the setting, talents etc there but they should be basically default. I checked a couple more times, without addons etc. everything is as I stated: After a good start it waits 2 full minutes for next SD, and then various fairly random intervals between further SDs. it will also delay SD up to 30 sec when *everything* except the racial is ready (SD, SR + trinket). Finally at least on the training dummy the first vanish after pull (when both prep and vanish are available) does vanish-prep-another vanish at same time, which sucks. [22:55:48.602 N] [YRB] Casting: Vanish on Raider's Training Dummy (1856) [22:55:48.603 N] [YRB] Casting: Backstab on Raider's Training Dummy (53) [22:55:49.688 N] [YRB] Casting: Preparation on Raider's Training Dummy (14185) [22:55:50.703 N] [YRB] Casting: Eviscerate on Raider's Training Dummy (2098) [22:55:51.705 N] [YRB] Casting: Vanish on Raider's Training Dummy (1856) I'm doing this in Hotkey Mode and enabling the Coolddown Key. I tried with automatic mode but it didnt use any CDs at all so I dont know what the deal with that is. EDIT: btw glancing through the logs it looks like shadow reflection is always being cast AFTER shadow dance. this has been discussed more than once in this thread i think going way back. as far as i know SR has to be cast BEFORE SD, otherwise the copy rogue doesn't use it. SR = memorize all abilities for 8 sec then use them. for example in macro: #showtooltip Shadow Dance /cast Shadow Reflection /cast Shadow Dance and if you put shadow dance first you done goofed. pretty serious issue if that's the case. again, SR first, then SD.
I can post a log tonight but maybe you are already aware of this; when I have multi target toggled on, it will spam multi shot as if there are multiple mobs now instead of detecting when to use multi shot instead of arcane. I am working around this right now by just toggling multi target off when there is only 1 mob but this was not an issue with the last version. And THANK YOU for adding the saving feature for the dps cds, I prefer to focus fire and BW manually to get the best dps for each boss so this will help my parses a TON.
Hi Xcesius, Re: Brewmaster Rotation. I still am unable to get either of the Special Hotkeys to place statue, would be awesome to be able to hotkey this as it's fairly situational. Also. The option "Set Black Ox Statue" for automatic placement is not working with the new release for me at all either (wouldn't really matter as much as it's much preferable to be able to hotkey this to save accidentally pulling additional groups etc)? The Zen Sphere improvements are absolutely awesome, love it & guard is working a treat now with % based solution. I'm playing around with manual cast pause, but it doesnt seem to be taking affect either?
How can I do a screen log to Xcesius? On Blood DK, and that seems to have issues still in my end. Also looks like it lags, stands there bouncing on screen. Top 3 damage abillitys as DK Tank spec, fighting Wetlands Trampler, Anacondas (take ages to kill. ilvl 659 in blood) And Breath of Sindragosa it never used once. Only buff on is "Horn of Winther" Melee 803318 (27%) Death Strike 578177 (20%) Death Coil 409812 (14%) Top 3 damage abillitys as DK Frost spec, fighting Wetlands Trampler,Anacondas, (take ages to kill even as frost.. ilvl 660 in frost) - Only buff on is "Horn of Winther" Says "You have inoficient blood charges to use on frost spec" Loosing alot of HP, seems not to use the abillitys to heal up properly Obliterate 426321 (48%) Melee 181598 (20%) Frost Strike 128991 (14%) So please still need help, not sure why it all of sudden makes so low bad dmg.. (Prolly me who screws any up, just can't figure out where and why)?!?
Are you able to elaborate on the logic behind the bot using maul during tooth and claw? Looking over my logs from Mythic Maidens last night I see that the bot is not casting maul as soon as I get a tooth and claw buff. With the 4pc (everytime I cast maul with tooth and claw my next frenzy regen is increased by 10%. stacks 3 times.) maul should be cast as soon as I get a tooth and claw buff. Obviously, you don't want to maul if you rage starved, but my personal preference is as long as I have 40 rage and a tooth and claw buff I will maul. Looking over the logs I can see that sometimes my tooth and claw buff actually falls off. Anyways, if you could just elaborate on the logic the bot uses that would be lovely. Thanks!
Hi, I noticed it didn't Flame Shock before Lava Burst lots of times, and same with Unleash Flame. I haven't played much elemental shaman but I guess it should do Flame Shock before every Lava Burst if the target don't have the dot, and Unleash Flame whenever Lava Burst is off cd I think. View attachment 3280 2015-04-04 22.20.txt
What is the best TPS for someone who runs about 50-60 fps? for max dps? Ret pally btw..and also You have a recommendation for the best configurations as well for Rpally for max dps? Im 686 w/o tier set bonus
Hi MrLamp, Lava Burst (Proc) and Unleash Flame has a higher priority while moving than Flame Shock. I've made some corrections for next update though Hi rhettro1989, Just set your TPS to 40/60 (depends how your pc handles HB). I'd recommend using OnBoss settings on all cooldowns.
Hi again guys, I was short looking on my hunter last night. It works fine, but how can I stop it from "Auto target , shoot an target when just marking it)? I've tryed to disable auto mark, but must be something else I miss, because it keeps shooting the mobs. And if doing a trap in raid, its not so good it starts shooting the mobs when in range Thanks!