ShamWOW for HB2 - An Enhance/Elemental/Resto + PVP/RaF Healbot by Bobby53

Hi, after the HB update, i cant open the CC config. What to do?

 

My apologies for any issue you may be experiencing. Please see the ShamWOW FAQ [CLICK HERE] which is post #2 in this thread for information on the details needed when posting about issues with ShamWOW. There are simply too many combinations of options, component versions, and game scenarios for me to accurately try and duplicate your results without having the details available to me that are present in the log file. Please see the FAQ at the link above for the template to use for posting issues/criticisms. Thanks for your help, Bobby53

 

is there a way to alternate shields or even turn it off. i tried reverseing the options but mana shield cannot be put higher than electic shield in percentages option,

 

Bakedapple, I'm not sure I understand your complete question. I cannot envision a circumstance where you would want the behavior turned off or reversed. Please click the Help button in ShamWOW Options to view the ShamWOW Help file and look for the topic on Shield Twisting. Hopefully that will answer your questions. Otherwise, please see the ShamWOW FAQ [CLICK HERE] which is post #2 in this thread for information on the details needed when posting about issues with ShamWOW. There are simply too many combinations of options, component versions, and game scenarios for me to accurately try and duplicate your results without having the details available to me that are present in the log file. Please see the FAQ at the link above for the template to use for posting issues/criticisms. Describing what you want using a specific example from the log file will enable me to provide a more useful answer. Thanks for your help, Bobby53

 

Bobby, was just wondering if you're still supporting squire or if development has stopped?

 

ah its just sometimes when i solo manually i like using earth shield but will check the intergrated help out

 

While grinding on my shaman, enhancement, I ran out of food and I could not eat. I monitored it and saw that it had the opportunity to heal itself, but did not. It had procced Maelstrom, which gives you a basically free and instant heal. I never run out of mana, and was wondering if there was any way to make him heal himself after a fight when he would be eating/drinking.

 

A new version has been posted. See my signature for a link to it.

 

Just out of curiosity, what are you soloing as Resto? In general, this CC doesn't try to provide customization of every ability available in WOW to Shaman for its users. The design philosophy is that it automatically detects the combat scenario and adapts with the best response automatically based upon its spec, available abilities, and certain datum from the fight.

 

in2fun, My apologies for any issue you may be experiencing, but your results do not match mine in testing. Please see the ShamWOW FAQ [CLICK HERE] which is post #2 in this thread for information on the details needed when posting about issues with ShamWOW. There are simply too many combinations of options, component versions, and game scenarios for me to accurately try and duplicate your results without having the details available to me that are present in the log file. Please see the FAQ at the link above for the template to use for posting issues/criticisms. Thanks for your help, Bobby53

 

i use earthshield when i fight random mobs with my low level friends, but i guess im just wandering about gathering i dont need any shield at the moment.

 

I'm wondering why you don't use the real Shamwow guy's picture?

 

Code:

>>> STARTING ShamWOW v4.2.09b by Bobby53

Your Level 63 Tauren Elemental Shaman Build is:  
Eleme/Enhan/Resto   28/0/0
... running the Instancebuddy bot Solo as Combat Only in Orgrimmar

InstanceBuddy detected... ShamWOW fast attack targeting disabled
Max Pull Ranged:   35
HB Pull Distance:  30

Fulmination: will wait for 9 stacks of Lightning Shield before using Earth Shock
Cleanse Spirit: can only remove Curses
Ghost Wolf: must stop to cast Ghost Wolf
Stoneclaw Totem: missing glyph, no Shaman Bubble available

Totem Bar[Earth]: STONESKIN_TOTEM
Totem Bar[Fire ]: SEARING_TOTEM
Totem Bar[Water]: HEALING_STREAM_TOTEM
Totem Bar[Air  ]: WRATH_OF_AIR_TOTEM
This profile does not contain any profiles fitting the character!

>>> STOPPING ShamWOW v4.2.09b by Bobby53
ThreadAbortException caught inside.
ThreadAbortException caught outside.

I get this when trying to set it up to run random dungeons as a 63 ele shaman

what am i doing wrong

 

That usually means that the profile you're using doesn't match your level. IB should have a blank profile it uses itself in order to avoid that. I can't explain it better than raphus does, sorry. I know what he means, but I can't explain it.

 

I am new to the WoW botting scene, reckon you can help me out a bit more? via msn or something

 

Code:

[Instancebuddy v3.0.1.196]:----------------------------------------------------------------------
[Instancebuddy v3.0.1.196]:Currently supported tanking dungeons :
[Instancebuddy v3.0.1.196]:(This list will update itself automatically)
[Instancebuddy v3.0.1.196]:
[Instancebuddy v3.0.1.196]: (Level 15 - 21) Deadmines
[Instancebuddy v3.0.1.196]: (Level 15 - 21) Ragefire Chasm
[Instancebuddy v3.0.1.196]: (Level 16 - 26) Shadowfang Keep
[Instancebuddy v3.0.1.196]: (Level 20 - 30) The Stockade
[Instancebuddy v3.0.1.196]: (Level 26 - 36) Scarlet Monastery - Graveyard
[Instancebuddy v3.0.1.196]: (Level 29 - 39) Scarlet Monastery - Library
[Instancebuddy v3.0.1.196]: (Level 32 - 42) Scarlet Monastery - Armory
[Instancebuddy v3.0.1.196]: (Level 35 - 45) Scarlet Monastery - Cathedral
[Instancebuddy v3.0.1.196]: (Level 38 - 48) Scholomance
[Instancebuddy v3.0.1.196]: (Level 42 - 52) Stratholme - Main Gate
[Instancebuddy v3.0.1.196]: (Level 46 - 56) Stratholme - Service Entrance
[Instancebuddy v3.0.1.196]: (Level 57 - 67) Hellfire Ramparts
[Instancebuddy v3.0.1.196]: (Level 59 - 68) The Blood Furnace
[Instancebuddy v3.0.1.196]: (Level 62 - 71) Mana Tombs
[Instancebuddy v3.0.1.196]: (Level 65 - 73) Sethekk Halls
[Instancebuddy v3.0.1.196]:----------------------------------------------------------------------
New bot added!: Combat/Heal Bot [1.0.0]
New bot added!: Instancebuddy
New bot added!: Grind bot
New bot added!: PvP
New bot added!: Mixed
New bot added!: RaF - Combat Assist
New bot added!: Questing - Beta
New bot added!: BG Bot [Beta]
Honorbuddy 2.0.0.3740 started!
Character is a level 63 Shaman
Current zone is: Orgrimmar
LastUsedPath: C:\Users\James\Desktop\firefox\CustomClasses\ShamWOW\ShamWOW\ShamWOW.ConfigForm.cs
Building spell book
Spell book built
Loading C:\Users\James\Desktop\firefox\CustomClasses\ShamWOW\ShamWOW\Shaman.cs.
Could not load profile: Data at the root level is invalid. Line 1, position 1.
This profile does not contain any profiles fitting the character!
Starting the bot!
Data at the root level is invalid. Line 1, position 1

Whenever I try to load a profile, I get this error message. This is the same with when trying to load Shaman.cs

EDIT: Trying a few things.. will update soon.

 

Appears to be broken with newest HB2 release (3881), just hangs out in the GY in WSG forever, with "Activity: Resting". Haven't tried it outside of BG's yet, will report back.

 

rawrasaurus, Sorry for the rough start for you. Here are a few suggestions:

1. Search for a New Users Guide or visit the Wiki on this site for New User information. It should walk you through HonorBuddy installation and usage. The problem you are having shown by the file above and your description is trying to Open the Shaman.cs file. Once installed, you don't have to think about that file again. You want to Open an XML profile (created by yourself or downloaded from this forum) which tells HonorBuddy where to go and what to do (grinding, question, farming, etc...) It would be worth reviewing some of that startup info before posting again.

2. See the ShamWOW FAQ [CLICK HERE] which is post #2 in this thread for details on how to post an issue in this thread if you are having a Shaman specific problem. The partial copy/paste of the Log window provided above isn't the same as attaching a complete debug log file. The FAQ will provide the steps explaining how to do this so complete info is available to help you.

3. If you are still stuck getting it going, send a PM to Tony. He is amazing at helping new users get up and going as quickly as possible.

Hope this helps,
Bobby53

 

SMcCloud, My apologies for any issue you may be experiencing. Please see the ShamWOW FAQ [CLICK HERE] which is post #2 in this thread for information on the details needed when posting about issues with ShamWOW. There are simply too many combinations of options, component versions, and game scenarios for me to accurately try and duplicate your results without having the details available to me that are present in the log file. Please see the FAQ at the link above for the template to use for posting issues/criticisms. Thanks for your help, Bobby53