[Q][A+H] Apexis Dailies-Missives / Securing Draenor Achievment + Auto Loader

Hello fellow buddies. I was searching for all in one solution for Apexis Dailies / Missives with relog support but I could not find anything which is for both factions. So I said to myself it is time to write my first ever profile. I thought it will be very easy loader which will use Kick's quests. And oh boy how I was wrong...

So let me present to you Apexis Dailies Missives with Securing Draenor Achievment with auto loader for Alliance and Horde:

UPDATED FOR HB3!

Credits
Thanks to Kick for his Apexis Profiles which were used as a base for the whole package.

Features

• Pickup Daily Quest from war planning table at your garrison.
• Check for Missive Quest counterpart to gain double ammount of apexis with one go.
• Check if we have enough garrison resources to buy Missive Quest. If not, it will write it in the log and will continue only with Daily Quest.
• Check if we finished Securing Draenor. If not, it will buy the Missive Quest for the missing unfinished Apexis Quest.
• Check if we have any unfinished Missive / Daily in our quest log and finish it
• Check for Missive Quest items in our bags, pickup the quest and finish it
• Load the required profile.
• Skip Current Task support for HBRelog when all is completed.
• Edited all kick's quests to work fully with Horde and Alliance.
• Useable for daily apexis or just for completing missives quest for apexis crystals.

Additional Info

I have made Assault on Skettis completely by myself as when I started to do this, it was missing from Apexis Dailies folder. The profile will kill units to gain keys, will rescue 4 outcasts (afterwards the profile stops rescuing as we can have only 4 outcasts at a time) and then will kill units to boost morale of outcasts. When the buff from Free Outcasts will be about to fall off, the profile will quide them to Outcast Darkscryer. It is much quicker profile than any other Skettis profile on this forum.

The Pit profile is another story. This area is tough, even tho I added some basic avoids, it is strongly recommended to use a tanking spec if available or spec with strong self healing mechanics. The toon will mostly die often, there is a vendor added so it should do it eventually. I have setup the minimal requirements to 675 iLvL, if you have lower quality gear, the profile will notify you that The Pit will be skipped.

Requirements:

• Must be started in Draenor
• Level 100 toon Horde or Alliance
• Garrison LvL 3
• Copy HBRelogSkip.cs into QuestBehaviors folder (it is included in this package)
• Load Auto Loader profile, press start, profit
• 675 iLvL for The Pit profile (some basic avoids installed), set Singular/Your CR to recover health to 80% so the pulls are less dangerous

Changelog

Version 1.3

• Updated for HB3
• Resolved lava issues in Stonefury Cliffs

Version 1.2

• Completle Redone Assault on The Pit
• Assault on The Pit, added support for destroying Training Manual and collecting Burning Blade Crystal buff which melt down faces of mobs
• Assault on The Pit, redone of all waypoints / hotspots, farming now on a smaller but more efficient space
• Assault on The Pit, now 99% AFK possible with almost all specs (excluding healers ), Blood DK, Prot Warrior, Druids having a blast here
• Assault on The Pit, added new blackspots in regards to new mechanics of interacting with quest game objects
• Assault on The Pit, rewamp of avoids, much more efficient and effective. I had to do a brainstorming to avoid vile poison cloud as avoid AreaTrigger doesn't work on it
• Auto Loader profile, updated loading of The Pit profile as the name was changed

Version 1.1

• Assault on Skettis, better time logic (now the toon will hunt mobs untill only 70 seconds left on the buff) when to guide outcasts to safety which open the possibility of getting the achievment Egs in one basket (higher than avarage chance)
• Assault on Skettis, full support for both NPC (there is one on each side of the questing area) to guide outcasts to safety in a most efficient way as it checks the current location of the toon and will chose the nearest NPC to interact with
• Assualt on Skettis, will now mount up to get to the npc in time, ignoring combat
• Assualt on Skettis, fixed loot behaviour when interacting with NPC to get outacts to safety as when there was some mob not looted, bot was stuck in the loop between interacting with NPC and trying to loot the mob
• Assult on Stonefury Cliffs, changed some hotspots and removed hotspots where is the lava field which sometimes resulted to deaths
• Auto Loader profile, now checking globaly for Securing Draenor Achievment so when we finished it with some other toon on the same account it won't try to complete individual parts of that achievment
• Assualt on the Pit, added/modified some avoids, tank specs should be done with this quest quite easily, still tough for non tank specs (tested with feral druid 685 iLvL, has some rough time but he can finish it)

Download
View attachment GarrisonDailiesMissives_1.3.zip
View attachment GarrisonDailiesMissives_v1.2.zip
SVN link

Profiles have been tested, all should be working well. However, if you will find any bug, please report it and attach the log so I can fix it asap.

Will be redoing all Apexis Quests profiles so they are on the same quality level as my Skettis profile. If you like this package, consider leave some reputation towards my account or even a donation , will be most appreciated. Enjoy guys .

 

Found a small bug within the Auto Loader for The Pit, so please redownload the package, it has been corrected.

 

Going to try this out today and I'll let ya know how it goes. Looks promising thanks for the U/L

Edit: Only had about three of the Apexis complete before starting the profile, loaded up it up, it completed all the ones I had remaining in about 2.5 hours and got the achievement without any flaws. Great work

 

Thank you for testing. Let me know how it went, hope all will be ok

EDIT: added svn link, made it public accessible

 

Trying it now, shall update!

 

Updated auto loader as it did not check globaly for Securing Draenor Achievment. It won't try to complete Missive Quest with toon when the achievment was already completed with some other toon on the same battle.net account. Please update from svn or redownload the package.

Edit: added changelog to the opening post so it is clear what changes has been done

 

That is awesome, happy it worked well and quite fast. Gratz on the achievment. You can still use it for daily quest combo with missive quest counterpart for 1600 Apexis

 

Completely redone The Pit profile, now 99% afk with all specs (still iLvL 675 requirement in place and excluding healers for obvious reasons), added support for interacting with quest game objects etc, see the changelog in the oppening post.
Download version 1.2 of the package or just update from SVN. Enjoy

 

I was wondering if I was just looking for completion of Securing Draenor. Does the bot auto check achievements completion and buy the mission scrolls in garrison?
I tried and my bot doesn't buy the achievements and even if I buy the scrolls and accepts the quest, the bot does a few kills and heads back and says its done.

 

Hello, it is checking for global achievment, so if you have it completed with some other toon on your account (or if you have more accs on battle.net as it is shared globaly through bnet acc). If the profile see that the global achievment is not completed, it checks all apexis daily one by one and buy missive quest items and finish all those dailys untill the achievment is not completed. Afterwards it is doing onlu war table apexis dailies with missive dailies counterparts for double apexis crystals gain. It also finishes any daily which is already in quest log or activate missive quest item if you have it in the bag. It skips achievement checking if it was already finished globaly like I stated at the start.

If it does not do that, please post a log and I will check it but I tested it with Alliance and Horde multiple times so it should work, however there maybe is a bug which I did not catch. Jus press "Y" and check for questing in draenor and if Securing Draenor is completed or not.

Edit: just a small suggestion, try to delete cache in honorbuddy, can help a lot of times if the profile is not working as intended

 

Hello,
Thanks for the prompt response. I tried the profile on two characters, and it seems disconnection during a mission will cause the bot to think its done with the mission somehow and it will end the mission early and head back to "camp".
It works fine if I just restarts the whole process using the loader a few more times.
I would like to show you the log, but I do not recall which one it is anymore.

But still, thanks for sharing your profile.

 

Thank you for the brief report of that behaviour. Just few question so I can pin point what could be the trouble. With the disconnection you mean WoW client got disconnect and then you are restarting HB? Or using HBRelog?
The only way where the bot will head back to base is if the auto loader is loaded as the bot will try to go to the "base" as there are several checks for each daily. I have finally finished my move to the new house and have internet access again so I can try to implement new check at the start of the profile so it is not heading to the base when the toon is already on the quest and not completed it.
For now, just leave it to go to the base, it will go through all those checks in autoloader and will eventually go to finish the daily quest which has been not completed as it checks for dailies in the quest log (dailies or missives) and load up the right profile for it. So it will take little bit more time but it always finish it. Sorry for any inconvenience.

 

I use HBRelog.

On a situation like the following:
Toon currently in a mission.
WoW freezes, HBRelog restarts wow and reattaches HB.
I press start.
Toon starts moving, and moving towards base.
Gets to base, and says all is done.

I press load profile and select autoload profile.
Toon starts doing mission again.

Your profiles are awesome, little bugs like this is no biggie, just thought might help you make it better.
Thanks again.

 

Hello and thx again for your time to report this issue. It looks like it is a problem with cache but I will try to reproduce this behaviour at home later on today and maybe I will find some solution. Will report to this thread my findings and hopefully possible fix

Glad you like this small project and find it useful

 

Everything worked really well, seemed like it could be faster by buying all of the missions at the same time instead of one at a time. Also, the profiles took me all the way through them no problem except for The Pit, which takes me to all the 100 Elites and just dies over and over. I took him out and started again and just took me right back to the Elites

 

Hello and thank you for your feedback. The Pit is tough for bot to solo it with some classes. And to complete the Pit, you have to kill all those 100 elites. It was originally designed for group of 3+ players at 6.0 WoD. There are only few non elites mobs, workers in the pit but they are giving you very small percentage to complete the quest and to get to them, you have to get first through 100 elites.

Minimum iLvL is set for 675 in the autoloader, otherwise it will skip it. Can you please write what class and specialization you are using? I have tested The Pit profile with several classes, but not will all of them so it may be difficult for your specific toon.

I have taken in the account your suggestion about buying all of the Missives Quests at once and then complete them one by one. Will try to rebuild the autoloader and see if it will be faster by a huge margin.

 

I am a BM Hunter with 690 ilvl. When I wrote the original reply I was using Survival Hunter with no pet. So I am going to be testing it out now that I changed and I will let you know. Thank you for your response.

 

I was able to run the pit with a 708 demo lock

 

Pets classes are little bit difficult for the one reason, avoidance mechanics coded in the profile don't apply to pets and if you do not have some healing supporting talents for your pet, it may happen the pet will die. However, when I was testing it with my 685 BM hunter, he get through it, although he died twice but finished it in less than 30 minutes. Hope your hunter will do the same Try to use spirit bond talent, that helped me quite a bit.

 

I did retest the profile with my BM hunter and everything worked fine cause my pet took the aggro. Before I was survival with no pet so I died quickly. Was a great profile and quick as long as I did it in the morning. Will use again on other 10 toons.