ShamWOW for HB2 - An Enhance/Elemental/Resto + PVP/RaF Healbot by Bobby53

About the time it takes betwean heals might be that i use DPS and Heal? might try with pure healing, will be at work for 24 but when i come home i will run some instances and try to get a more precise time for then it does not ress.

Also about healing spells i to like the above poster think it should use faster healing spells more often. and the time betwean a heal is cast and it cast the next heal could be shorter to, just a feeling a have, need to test it out more.

 

Techz, My apologies for your issue, but I can't really do anything with your post as it doesn't match the results of my testing. I suggest running again and if you observe a problem look immediately at the clock on your computer and make a note of the system time. Then post the issue including both the system time you saw it occur and the complete debug log file and I should be able to respond quickly. Here is a link to the ShamWOW Frequently Asked Questions [CLICK HERE] which has a template for users. Thanks for the post and good luck with your Shaman, Bobby53

 

If you prefer different priorities for healing spell selection visit Class Config - Group Healing tab. The above posters issue appears to be a little different than that, in that it he mentions never casting Healing Surge rather than simply not casting it enough.

 

Hello there! Thank you for an awesome CC!

I did have problems first time i tried to do a dungeon today...qeue popped...and i thought i should start instancebuddy and launch your cc.

But i couldnt get IB to start for some reason I would post a log but its kinda big.

Im swedish so the last lines somehow came in swedish ...but it says everytime i tried to launch IB inside of the dungeon :

"Object reference not set to an instance of an object".
if i translate it correctly."

Here it is as i see it.
[17:29:50:2] Failed to get tile map for WailingCaverns!
[17:29:50:4] Tilemap is null!
[17:29:50:4] Stop called!
[17:29:58:117] Start/Stop button pressed.
[17:29:58:132] Starting the bot!
[17:29:58:152] Objektreferensen har inte angetts till en instans av ett objekt.
[17:29:58:152] Stop called!
[17:30:04:639] Start/Stop button pressed.
[17:30:04:650] Starting the bot!
[17:30:04:677] Objektreferensen har inte angetts till en instans av ett objekt.
[17:30:04:677] Stop called!

 

Yes. See the LazyRaider [CLICK HERE] bot for use in those environments.

 

Bobs, we miss you =(

where u been!

 

Dirtdog, Please see the ShamWOW Frequently Asked Questions [CLICK HERE] page which provides details on the information needed when posting an issue and how to attach large log files. Given the log file fragment that was copy and pasted, you were having a problem with the HonorBuddy accessing the navigation information (tilemap). If that is not functioning, then none of the other elements (including ShamWOW) will work either. If you get a message saying "Tilemap is null" or "Failed to get tile map for ...." close HonorBuddy and restart. If you continue to have problems with that, you will want to post in the HonorBuddy Support thread. In general Shaman specific questions/issues would be answered the quickest here, while general HonorBuddy questions would be answered most promptly in the Support thread. Thanks and good luck with your Shaman, Bobby53

 

Hi Kick! Have been working really long days. I haven't been available much online; just enough to respond to a few posts and research a question or two. Hopefully in the next month or so I be around a little more. Talk to you soon, Bobby53

 

Thanks for the reply Bobby....ill see to it!! Fucking love your cc overall! Keep it up!

 

Hi
i'm new and kind know nothing about how the files works I try to read files but
I opened the file and only find two files 1 is name changes and 2nd shamwow which 10 files inside it and I can't open 1 to read.
please help me what I should do with the files where i put them and thanks

 

ShamWOW version 4.3.13

HonorBuddy Mode: RaF (Party)

Shamans Location: N/A

What should have happened (be specific):

Secondary should have vendored items and ran back to primary

What did happen (be specific):

Note that I was receiving an error that would not let my toon run to a vendor away from the primary to vendor goods. I changed some settings, a lot of settings at one time. I then was able to get my toon to run over to the vendor to sell items. Secondary went to vendor items... at the vendor the toon kept shaking around popping the log below. Note that I went back to settings and put a check back in the "Closely Follow Leader (Don't Wait For Bot" box and the error went away. My toon ran back to primary.

System time of issue (log time stamp):





[8:42:17 PM:514] Cleared POI - Reason Exception in Root.Tick()
[8:42:17 PM:514] Cleared POI
[8:42:17 PM:652] System.Runtime.Remoting.RemotingException: Requested Service not found

Server stack trace:
at System.Runtime.Remoting.Channels.BinaryServerFormatterSink.ProcessMessage(IServerChannelSinkStack sinkStack, IMessage requestMsg, ITransportHeaders requestHeaders, Stream requestStream, IMessage& responseMsg, ITransportHeaders& responseHeaders, Stream& responseStream)

Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at System.Object.FieldGetter(String typeName, String fieldName, Object& val)
at PartyBot.DiscoBot.(Object ret)
at TreeSharp.Switch`1.RunSwitch(Object context)
at TreeSharp.Switch`1..MoveNext()
at TreeSharp.Composite.Tick(Object context)
at TreeSharp.PrioritySelector..MoveNext()
at TreeSharp.Composite.Tick(Object context)
at TreeSharp.Decorator..MoveNext()
at TreeSharp.Composite.Tick(Object context)
at TreeSharp.PrioritySelector..MoveNext()
at TreeSharp.Composite.Tick(Object context)
at TreeSharp.PrioritySelector..MoveNext()
at TreeSharp.Composite.Tick(Object context)
at Styx.Logic.BehaviorTree.TreeRoot.()
[8:42:17 PM:652] Cleared POI - Reason Exception in Root.Tick()
[8:42:17 PM:652] Cleared POI
[8:42:17 PM:827] System.Runtime.Remoting.RemotingException: Requested Service not found

Server stack trace:
at System.Runtime.Remoting.Channels.BinaryServerFormatterSink.ProcessMessage(IServerChannelSinkStack sinkStack, IMessage requestMsg, ITransportHeaders requestHeaders, Stream requestStream, IMessage& responseMsg, ITransportHeaders& responseHeaders, Stream& responseStream)

Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at System.Object.FieldGetter(String typeName, String fieldName, Object& val)
at PartyBot.DiscoBot.(Object ret)
at TreeSharp.Switch`1.RunSwitch(Object context)
at TreeSharp.Switch`1..MoveNext()
at TreeSharp.Composite.Tick(Object context)
at TreeSharp.PrioritySelector..MoveNext()
at TreeSharp.Composite.Tick(Object context)
at TreeSharp.Decorator..MoveNext()
at TreeSharp.Composite.Tick(Object context)
at TreeSharp.PrioritySelector..MoveNext()
at TreeSharp.Composite.Tick(Object context)
at TreeSharp.PrioritySelector..MoveNext()
at TreeSharp.Composite.Tick(Object context)
at Styx.Logic.BehaviorTree.TreeRoot.()
[8:42:17 PM:827] Cleared POI - Reason Exception in Root.Tick()
[8:42:17 PM:827] Cleared POI
[8:42:17 PM:992] System.Runtime.Remoting.RemotingException: Requested Service not found

Server stack trace:
at System.Runtime.Remoting.Channels.BinaryServerFormatterSink.ProcessMessage(IServerChannelSinkStack sinkStack, IMessage requestMsg, ITransportHeaders requestHeaders, Stream requestStream, IMessage& responseMsg, ITransportHeaders& responseHeaders, Stream& responseStream)

Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at System.Object.FieldGetter(String typeName, String fieldName, Object& val)
at PartyBot.DiscoBot.(Object ret)
at TreeSharp.Switch`1.RunSwitch(Object context)
at TreeSharp.Switch`1..MoveNext()
at TreeSharp.Composite.Tick(Object context)
at TreeSharp.PrioritySelector..MoveNext()
at TreeSharp.Composite.Tick(Object context)
at TreeSharp.Decorator..MoveNext()
at TreeSharp.Composite.Tick(Object context)
at TreeSharp.PrioritySelector..MoveNext()
at TreeSharp.Composite.Tick(Object context)
at TreeSharp.PrioritySelector..MoveNext()
at TreeSharp.Composite.Tick(Object context)
at Styx.Logic.BehaviorTree.TreeRoot.()
[8:42:17 PM:992] Cleared POI - Reason Exception in Root.Tick()
[8:42:17 PM:992] Cleared POI
[8:42:18 PM:164] System.Runtime.Remoting.RemotingException: Requested Service not found

Server stack trace:
at System.Runtime.Remoting.Channels.BinaryServerFormatterSink.ProcessMessage(IServerChannelSinkStack sinkStack, IMessage requestMsg, ITransportHeaders requestHeaders, Stream requestStream, IMessage& responseMsg, ITransportHeaders& responseHeaders, Stream& responseStream)

Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at System.Object.FieldGetter(String typeName, String fieldName, Object& val)
at PartyBot.DiscoBot.(Object ret)
at TreeSharp.Switch`1.RunSwitch(Object context)
at TreeSharp.Switch`1..MoveNext()
at TreeSharp.Composite.Tick(Object context)
at TreeSharp.PrioritySelector..MoveNext()
at TreeSharp.Composite.Tick(Object context)
at TreeSharp.Decorator..MoveNext()
at TreeSharp.Composite.Tick(Object context)
at TreeSharp.PrioritySelector..MoveNext()
at TreeSharp.Composite.Tick(Object context)
at TreeSharp.PrioritySelector..MoveNext()
at TreeSharp.Composite.Tick(Object context)
at Styx.Logic.BehaviorTree.TreeRoot.()
[8:42:18 PM:164] Cleared POI - Reason Exception in Root.Tick()
[8:42:18 PM:164] Cleared POI
[8:42:18 PM:279] Start/Stop button pressed.
[8:42:18 PM:296] Stop called!
[8:42:18 PM:318] System.Threading.ThreadAbortException: Thread was being aborted.
at Styx.Logic.Targeting.Pulse()
[8:42:18 PM:321] System.Threading.ThreadAbortException: Thread was being aborted.
at Styx.Logic.Targeting.Pulse()
at Styx.WoWPulsator.Pulse(PulseFlags flags)
at Styx.Logic.BehaviorTree.TreeRoot.()
at Styx.Logic.BehaviorTree.TreeRoot.()
[8:42:18 PM:322] System.Threading.ThreadAbortException: Thread was being aborted.
at Styx.Logic.BehaviorTree.TreeRoot.()

 

OK apparently the above was because I did not click "Start" on the primary first. I clicked "Start" on the secondary... though it would be nice to get a message giving the reason for that error. Also my primary was questing and my secondary would not turn in quests/get new ones along with the primary. Any problems with this?

 

Jesus, post full logs instead of spamming, ty.

 

just attached the log instead of spamming this crap mate, the log you can find in you HB folder

 

Oh you mean post a file... I gotcha. I'll look for it next time, thanks.

 

Has anyone else encountered problems with shamwows usage of manatide?
Dunno if i'm missing something but it kinda wastes manatide sometimes. It casts manatide, and the first tick of it gets enough mana back so that shamwow instantly casts manaspring again.

Tried turning off the totems completely, but it still wants to use manatide for some reason :/

Am i doing it wrong? Something thats been answered 100s of times and im just missing it?

Ive used the "search thread" function above and tried to find all variations of the word manatide or manaspring, and found 1 guys posting about a somewhat similar problem, but as far as ive seen it hasnt been answered yet.

Any help with this? Can i completely turn off totems somehow? and handle them manually ?

Im using shamwow with lazyraider and the latest hb version.



HonorBuddy Mode: Lazyraider
Shamans Location: Blackwing Descent
What should have happened (be specific): Should've castet Mantide
What did happen (be specific): It castet Mantide, and as i said, it instantly switches back to manaspring
System time of issue (log time stamp): 1:33:39

Logs attached


Ah and by the way bobby: keep it up dude! Awesome work right there!

 

Just posting to say thanks a lot I've seriously leveled an orc shaman 1-65 so far, going strong towards 85 to get into my guilds alt raid group, I seriously appreciate the work, it's phenominal the only problem I had at first, was sheer stupidity on my part, it was when it wouldn't ghost wolf, because the usemount took precedence, which i found out I just thought the usemount option was in the shamwow settings, only to finally find out after i got a mount it's in the main HB settings, other then that, this things a beast, it afk healed every instance tbh, i just set it to random dungeon, set my alarm clock every 3 hours (Using mixed mode Instance buddy, and a quest/grind profile) It only failed on me twice when a tank bugged combat and afked, and just sat there, so the bot sat with him, and when my bot got bugged and stuck in party, both variables very uncontrollable, but still had stellar performance, if you level as resto, queue times are fast, with a solid questing profile you level like a mad cunt (60-70 I'm using a grinding profile, was the questing one is bugged to hell right now, even though the healer queue dropped and i'm getting queues almost instantly now).
Anyways, I'm rambling
Thanks you do great work, keep it up.

 

u12e12a, Please see the ShamWOW Frequently Asked Questions [CLICK HERE] page which answers the most common questions. You will find Installation instructions there. You may also want to consult the HonorBuddy Wiki which has articles on HonorBuddy Setup including the installation of CC's (like ShamWOW.) Thanks for the post and good luck with your Shaman, Bobby53

 

bigdano, Thank you for using the template from the FAQ when posting your issue, but keep your issue to a single post and never don't copy and paste log file information to posts. You should revisit the posting instructions on the FAQ for details on how to attach the log file. It needs to be compressed into a .zip and then attached rather than copy and pasted. As for the System time of issue (log time stamp): field, I need you enter the time that you witnessed the problem while botting, so when an issue occurs quickly glance at the clock on your computer and note the time.

Movement to a Party member out of combat is handled by the Bot you were using, so you'll want to post your question in thread specific for it. If none exists, post in the Support thread for HonorBuddy. Thanks for the post and good luck with your Shaman, Bobby53

 

This is a Bot issue and not specific to Shaman. You will want to post in the Support thread. Thanks, Bobby53