ShamWOW for HB2 - An Enhance/Elemental/Resto + PVP/RaF Healbot by Bobby53

Thank you for the awesome new update!

 

NaRK, Thank you very much for the description and debug log. The description of what happened isn't entirely accurate. Contrary to Fulmination never being used, the log shows Fulmination was used approximately once per minute in the 20 minute span beginning at 15:49 (so includes the first 15 minutes of the timeframe referenced.) Of those, it appears 3 failed. The failure is due to a bug occurring when a combat buff is cast immediately prior (like Bloodlust, Elemental Mastery, etc.) I will fix that in the next release.

So why was your Shaman carrying 9 stacks longer than you would expect at times? ShamWOW implements the Elitist Jerks priority queue for Elemental [CLICK HERE]. Since Flame Shock is higher in the priority, whenever you target a new mob the first thing it looks to do is apply Flame Shock. This puts all shocks (including Earth Shock) on cooldown. By the time the Shock cooldown expires and the higher priority spells are on cooldown (meaning its now Fulminations turn,) the mob is already dead. The spell priority is correct for fights with NPCs that don't die quickly (elites or higher level mobs.) For those that die quickly, it may make sense to temporarily increase the priority of Fulmination for the initial attack only. I'll give that a further look and add to one of the next releases if feasible.

Thanks for your post and good luck with your Shaman, Bobby53

 

HonorBuddy Mode: Questing
Shamans Location: Zangarmarsh
What should have happened (be specific): Nothing differently afaik, just a suggestion to add, if possible, detection of evading mobs and a possible way to disengage/blacklist.
What did happen (be specific): Bot was stuck fighting a mob for 7 hours.
Computer time of problem (local time, not realm time): I don't remember exactly. It was overnight. Probably something like 2am to 9 am.

Like I said, this is just a suggestion.
Since patch 4.3 it feels like there's evading mobs everywhere (I'm starting to think it was done on purpose to bust bots), so a way to detect/avoid/blacklist evading mobs would be amazing for levelling.

That's pretty much it. Thanks in advance!

 

Toney001, Thank you for taking the time to post again. Just to clarify, there IS evade bugged mob detection already present in ShamWOW. In rersponse to an evade mob, it should blacklist the mob and continue with the next objective. However, it appears to be failing in your case. I appreciate you going to the trouble of posting and attaching a huge log. Unfortunately there are two things I need to be able to resolve this for you.

1. Enable Debug Output. Click the Class Options button, to the General tab and enable Debug Output

2. When posting, provide the time you observed the issue. It doesn't have to be the start of the issue, but it does need to be a single specific time as to when you saw it happening. If you wake up in the morning and its fighting an evade bugged mob, immediately close HonorBuddy. That way you can simply say the last thing in the log is the evade issue. Otherwise, just write down the time before touching anything and provide that in a post with the log.

The problem here is that for some reason it isn't detecting Evade mobs, so there is nothing in the log file that will scream "I'm fighting an evade mob but don't realize it." That's why the time is so important. As for the debug info, it provides valuable details and data on what the CC was thinking at the time it was fighting that I need to understand where the behavior went wrong.

I greatly appreciate your help. Once this info is available I will do what I can to resolve immediately. Thanks again and good luck with your Shaman, Bobby53

 

Thanks for your pointers. I already noticed the Quest Helper exception beforehand and disabled it a few minutes after the debug note was written. The Out of Memory message is curious since I have 8GB of memory on this machine and run no other programs in the background.
My theory is that there's a bottleneck when both WoW clients change the zone simultaneously.

In any case, I think I've found the issue. I have to join arena on the Shaman a few seconds before I join it on the second character or else the bug occurs. I also have to leave it on the Shaman before I leave it on the second character or the shaman-WoW-client throws #132. Presumably the bug is somehow related to HB/Partybot and not your CC at all. Thanks for your time.

 

I've been doing lots of bug reporting for Kick, so I disabled debugging so he didn't have to go through huge logs every time.
I'll get back to you when I find another evade bugged move. There's plenty of those around, unfortunately.

Thanks Bobby .

 

Hi,

i like your CC very much. In BG i have a little Elemental Shaman Problem in big Fights he try always to Bind Elementals over and over again, can you maybe add an Option to enable/disable bind Elementals in Pvp?

 

Toney001, You are correct, it gives Kick a headache to look through a log file that has a lot of debug info that doesn't pertain to his Quest profiles. I intentionally created ShamWOW debug output to include a specific pattern, making it easy to filter out (remove) from a file. On the other hand, it is impossible to add the debug information to a file created with the Debug Output option disabled. The Windows FIND command line with the /V parameter will filter it out so users can leave the Debug Option enabled. There are plenty of GREP like utility programs that do the same, but the FIND command is already present on every Windows machine.

To remove ShamWOW debug output from a log file, start a Command Window and type following the FIND command below (changing the filenames as appropriate). The following creates a file named NODEBUG.TXT that has the debug output removed (equivalent of creating with Debug Output disabled):

Code:

find /v "] %   " debuglog.txt  >nodebug.txt

If you prefer batch files you'll need to deal with the use of a % character, create file named NODEBUG.BAT containing the following line:

Code:

find /v "] %%   " "%1"  >"nodebug.%1"

Note: there are 3 spaces present between the % and the " character. That reduces the chance of accidentally filtering out another components output that incidentally has those characters present.

As for the Evade issue, I may need to provide you a debug version that outputs all misses to get to the bottom of this quickly. I'll make that available for download later tonight when I get home from work.

Thanks for the post and good luck with your Shaman, Bobby53

 

peanutbird, You are very welcome! The log had contained a number of .NET communication exceptions as well, which would seem to indicate a Party Bot issue as well (although I would have expected you need to start the non-Shaman first since it has the leader plugin enabled first.) As for the memory issue, it is most likely due to an exception occurring that wasn't being handled correctly which resulted in the program looping and consuming vast amounts of memory. In otherwords, you could have 16GB and it likely would have still occurred.

For the most part, there shouldn't be exceptions in your Log file. ShamWOW will sometimes write an exception to the log file when a character has disappeared (gone offline, left a raid, etc.) between the time it was selected as the target for a spell/ability and the time it is actually cast. They don't occur often and have a comment to that effect saying it is an expected message so should be easy to identify.

It could still have some relation to ShamWOW, but the log I reviewed indicated a number of the issues I described occurring before ShamWOW was involved. If you continue to have any issues, please post again and I'll see what I can do to assist.

Thanks for your help in posting such a well written issue! And good luck with your Shaman, Bobby53

 

derhelge, Thanks for your post. Bind Elemental is a good practice and doesn't sound like an issue unless you are saying it is spamming Bind Elemental (repeated failed castings interfering with the rest of the spell priority.) If it is spamming that spell due to some error, please see the steps provided in the ShamWOW Frequently Asked Questions [CLICK HERE] which provides a template to copy and paste as well as directions on attaching a complete debug log file. It will be very important when posting to provide a single specific time (your local computer time) that you saw ShamWOW casting Bind Elemental when it shouldn't have. In general, the design objective of ShamWOW isn't to be configurable to your style of play, but to implement a best in class response for your Shaman. So while I'll review and consider requests like yours to add an option to control a specific behavior, but typically only add an option like that if it is required for some situation. Thanks for your post and good luck with your Shaman, Bobby53

 

Thx Bobby53,
Let me explain the Problem. For Example the Bot Fight on flag in eye of the Storm an there is an Frost mage, first he bind his elemental but some On make an aoe effect and put the elemental Out from bind so the Cc bind elemental again. So my toon bind again and again for 30secs. Next Time i See this i give you a Log and use your Template.

 

what specc should i go while lvling? enhancement or elemental? or even resto? , reading the posts ppl posted here are a lot about resto specc , how well is the CC for the other 2 speccs?

 

In the FAQ Bobby recommends Enhance. I personally used Elemental, but that was because I wanted to go Resto at 85 and have somewhat decent gear to do so. I think Elemental would be your faster choice.

 

Ok, i will trye them both, what specc you thhink would be best for pvp?

 

Any of them... You really can't go wrong with ShamWoW and some PvP gear.

 

Can anyone post your sham wow setting for arena resto shaman settings love to see what everyone is doing and also link your highest score particularly 3v3

 

It doesn't really matter what settings others are using, because ultimately you will need to know how to play a Resto Shaman in Arena so your rating will be based upon your skill and understanding of the class, pvp, and your team composition. Read this earlier reply to another ShamWOW regarding the same request -- End Game PVP [CLICK HERE]. Good luck with your Shaman, Bobby53

 

Derhelge, Please do make a complete post when you encounter this again. I don't encounter a lot of people repeatedly breaking CC's in BG's unless its to focus one that has been slowed/rooted. Clearly it can happen however. ShamWOW currently is lacking Diminishing Returns logic so it would attempt to cast again even once the Water Elemental is immune. I'll add logic to detect that and suppress BE casts at that point. Thanks for the post and good luck with your Shaman, Bobby53

 

DrDoctor, You should read the ShamWOW Frequently Asked Questions [CLICK HERE]. This will answer common questions about ShamWOW and provides links to additional information on Shaman. #9 in that document answers your questions. Spec for PVP does not matter. Since at some point you may want to take over manually, play the one you would prefer playing by hand. Thanks and good luck with your Shaman, Bobby53

 

Bobby, I've been using your CC for years now, and it's more awesome now than ever. Easily the best CC for any class, hands down.. I'm happy with every facet of the CC itself, but I've noticed something the last few weeks using the CC in LFR and a heroics.. My toon is relatively well geared (385 ilvl) so mana regen is not an issue at all. Having said that, I end fights with 95-100% mana most of the time, and low #s on the healing meter. Now, I while I realize that the bot is healing "smartly" and not wanting to overheal, I get called out in raids for having "low numbers" - even if the overhealing is next to none.. I've tried basically all the settings I can come up with to basically just make the bot use Earth Shield, Riptide, Healing Rain, and Chain Heal.. Maybe I'm just not understanding how the settings work? Any advice?

Thanks again Bobby.