ShamWOW for HB2 - An Enhance/Elemental/Resto + PVP/RaF Healbot by Bobby53

renzorx, There actually is an option already built in since you are in full control of what gear you equip. It's similar to ShamWOW reacting to a Resto that has Telluric Currents and Focused Insight specced. Don't want your healer to cast Lightning Bolt and Shocks? Respec without those talents.... Don't want your healer to roll Riptide due to recognizing the 2pc T12 bonus? Equip different gear so you don't have the bonus. It's straight forward enough that I don't see the need for adding a 94th option to the Class Config dialog. I appreciate the post and wish you best of luck with your Shaman. Let me know if you encounter any other issues, Bobby53

 

Salatgurke, It only appears when you upgrade to a new version of ShamWOW or a brand new installation. Click the message box and it will not reappear until the next time you upgrade. Thanks for the post, Bobby53

 

Jalysco, This is about the same question you asked previously. Here is a link to my previous response [CLICK HERE]. Good luck with your Shaman, Bobby53

 

if you cant use yoru eyes in the box, then why dont you just click them all

 

istix, I think we need to back up a couple steps. The only reason for making a change to the hitbox size is because there is a problem. However, changing the hitbox size may not be the correct way to fix. Please visit the ShamWOW Frequently Asked Questions [CLICK HERE]. Read FAQ #1 which describes how to write a detailed issue post and how to attach a complete debug log file which is needed for me to research for you. Without that information I'm afraid I won't be able to correctly assist you. Thanks for the post and good luck with your Shaman, Bobby53

 

thank you for your reply, but i spent a lot of time to understand(maybe im just plain retarded) why he the cc did what he did, and it looked really stupid and beyond botty.

 

renzorx, If you have any issues or questions about behavior you observe, my suggestion would be to post as described in the ShamWOW Frequently Asked Questions [CLICK HERE]. Now that you know about the T12 support it will be really easy for you to control the "really stupid and beyond botty" behavior, but for any future issues it will save you from figuring it out on your own and hopefully allow you to communicate in less dramatic prose. For now I'll add a check on the Riptide Rolling logic to suppress if you are mounted or in ghost wolf form (which should work better than the option requested.) Thanks for the post bringing the issue to my attention and good luck with your Shaman, Bobby53

 

Hello bobby,

I just want to say thank you for the awesome shaman CC. Its just awesome, I have no issues since the beginning, cant understand how some guys can have issues with this cc. The GUI is just awesome and your CC works everyswhere, just good! I hope you will continue developing this CC (how it seems like) and I hope you're prepared for MoP!

Btw, I would like you to spent some money, but sadly donations are not permitted and your URl for repping you is not working (404).

All in one: GREAT CC; NO ISSUES; AWESOME SHIT!

 

best most reliable cc for any class out there....wish everyone would use shamwow and a model....great work guys...

 

Is there an option to enable the use of Spiritwalker's Grace? With 4pc you get a 30% haste bonus while active.

 

I have not seen updating to a new version causing any issues regarding currently running bots. It simply runs the current installed version before the next restart. Regardless, that is not the reason it didn't work. I tried and retried countless times and I'll do so again with a log from a reformatted computer.

Steps Taken:
Reformatted computer
Download Honorbuddy
Download AutoAngler 2 (from the SVN)
Download ShamWoW (from your thread)
Place everything in their designated folders
set pool fishing to false
Start HB
let everything update
Close HB
Start HB
pick ShamWoW
it stands there doing absolutely nothing

Now, I take the same steps except I use my warrior.
I delete my HB folder and completely download everything over again. Notice how the first log actually shows fishing happening. Notice how it's fishing even though it downloads a new version of autoangler2 and continues fishing proving my earlier point that the update has 0 impact on this. There is obviously a shaman issue that me and other people are getting. We need real feedback or at least acknowledgement that the maintainer of AutoAngler2 agrees it exists.

You say there's nothing wrong, but please explain how after all of this it still refuses to cast a fishing line ONLY ON THE SHAMAN CLASS. I'm not faulting your CC as it doesn't work with singular either. There is some inherent problem within autoangler specifically that is making it refuse to work with shaman.

Are you using an older version of autoangler2 perhaps? Because everything I'm doing is completely fresh on a completely new installation of windows with no plugins added and only the steps I've outlined.
It simply does not work on the shaman. Please someone dispute my procedure, what I'm saying, or figure out what is wrong because it appears as most people are ignoring it.
I don't know how to give better feedback for this issue than what I already have given. If there's anything else I can add, ask for such.

I apologize if I'm coming off as a little hostile, but it just appears as if no one is really taking this seriously. I'm not derp when it comes to figuring things like this out or troubleshooting them.

pasted from the autoangler thread since you requested that I post here, although I don't think it's a problem related directly with shamWoW.

 

HonorBuddy Mode: AutoAngler2
Shamans Location: Twilight Highlands
What should have happened (be specific): Followed the profiles path and fished from pools.
What did happen (be specific): It just stood there.
Computer time of problem (local time, not realm time): 10:33, 10:34, 10:38.

Edit: Having the exact same problems as Quick - so either we are both doing something wrong, or there is a compatability issue with Auto Angler 2, and shamwow / singular. Cause ive tried every profile with each shamwow and singular and they just stand there.

 

Maybe it"s spec specific. I'm having no issues at all using AutoAngler2 with ShamWoW (Resto and Ele spec).

 

Bobby!

CC is great as usual. One question tho.
Where can I edit the default values for group healing. I Tend to be switch between 2 different setups from time to time.
Would be nice if you could point me in the direction where the CC checks the values for "Let it rain" and "normal" raid defaults so I can add them to better suit my needs.

 

Rawrrawrmeow, It's not the same issue as Quick, although it is the same issue I replied to you with a fix earlier [CLICK HERE]. It sounds like you redownloaded ShamWOW, but only partially extracted the .ZIP to your CustomClasses folder.

Messages in the logs you submitted identifying the installation error in the two ShamWOW sessions are:

Code:

[B]From 4-5-2012_10_29 AM 48292 Log.txt[/B]
[10:33:08 AM:547] Error: global config file not found: 'C:\Users\...\Documents\Downloader\CustomClasses\Config\ShamWOW.config'
[10:33:08 AM:547] ... see ShamWOW FAQ for installation steps 

[B]From 4-5-2012_10_33 AM 46248 Log.txt [/B]
[10:34:55 AM:958] Error: global config file not found: 'C:\Users\...\Documents\Downloader\CustomClasses\Config\ShamWOW.config' 
[10:34:55 AM:958] ... see ShamWOW FAQ for installation steps

Until you extract all contents of the .ZIP, you will continue to have an incomplete installation of ShamWOW that will not work with any BotBase. That means you can't use Questing or InstanceBuddy or BGBuddy or anything else including AutoAngler.

To resolve, please carefully follow the installation instructions for ShamWOW being certain to extract ALL folders from the .ZIP rather than just the ShamWOW folder. The .config file identified as missing is present in the .ZIP. Until you successfully install ShamWOW, I won't be able to assist you further.

See FAQ #6 in the ShamWOW Frequently Asked Questions [CLICK HERE] or the INSTALL.TXT included in the .ZIP you downloaded for specific steps on how to install ShamWOW and verify that the installation is correct.

Good luck with your Shaman, Bobby53

 

not spec specific. I have tried it as both ele and enhance. I am at a loss to figure out what is wrong.

any word on my issue, bobby53?

 

dotzor, A better solution would be to create multiple HonorBuddy installations, each configured for whatever unique purpose or usage you have. You also rename the HonorBuddy.exe to something else (like HBRAID.EXE and HBHEREOIC.EXE) and that name will appear in the Title Bar of your HonorBuddy window so you will be able to distinguish them at run time. Good luck with your Shaman, Bobby53

 

Quiksmage, No not hostile, but I would say anyones frustration can push them there. So before you get to that point it would be a good idea to take a deep cleansing breath before posting, and I'll promise to do the same before replying. I am helping you with a installation specific problem that pertains only to a BotBase I didn't write. I also do this as a hobby (yes, for fun) so since there is no pay coming from it, I'm not very inclined to help members writing posts that are even moderately inflammatory. But that didn't happen, so enough squandered text on non-issue....

Just to clarify a few points. I didn't say there isn't a problem with your installation, I said there isn't a problem with mine. I also said there currently is no known conflict between ShamWOW and AutoAngler2. I have no doubt after reviewing the log files you provided that you are encountering a problem. I am only saying there isn't a systemic problem that prevents all ShamWOW users from using AutoAngler. At this point, the only other user encountering a problem using with AutoAngler is Rawrrawrmeow and his issue will be resolved as soon as he fully installs ShamWOW as described on the FAQ web page and the INSTALL.TXT included in the .ZIP.

I agree that this seems most likely a AutoAngler2 issue, as you correctly identified that it was fishing with AutoAngler+ShamWOW (noting the succesful casts in the log) until you restarted HB. Restarting HB invokes the newly downloaded AutoAngler2 update representing the only change between when it worked and when it didn't. This is also reinforced by stack trace information in the log file where it blows up, showing that there was no ShamWOW components executing at the time of the exception.

So.... I am going to send you a PM with a request for some specific information about your installation so I can compare to mine. It may take a few iterations but as it doesn't appear you have gotten much assistance outside of this it probably sounds like a good deal at the moment.

Thanks for your patience and look for a PM from me shortly, Bobby53

 

This class working Lazyraider?

 

Bobby,

This is such a fantastic CC the best on the site by far. Wish other CC's would be as good as this. Slight off topic I know but do you plan on making a Monk CC?

Many Thanks