ShamWOW for HB2 - An Enhance/Elemental/Resto + PVP/RaF Healbot by Bobby53

shamash, For support with ShamWOW, please see FAQ #1 in the ShamWOW Frequently Asked Questions [CLICK HERE] for steps on creating a post that contains the information needed for me to assist you. Simply too many variations in handling based upon user configuration, spec, botbase, operating environment, etc. to warrant guessing. The FAQ also contains answers to a lot of other common questions. Thanks for the post and good luck with your Shaman, Bobby53

 

Got a bit of an odd one.
I have two separate folders for my shamans. One for leveling with all the bells and whistles plugin and quest behavior wise, and a stripped down version for lazyraider.

Couldn't remember which version of shamwow I had for leveling, so I downloaded 4519 and replaced the one that was there.
Now I get these file errors you can see in the attached log.

 

emmark, It appears there are multiple copies of ShamWOW in that CustomClasses tree. Do a fresh install of HonorBuddy 2.0.0.5883, delete any existing ShamWOW folder, then install ShamWOW 4.5.19 and you should be okay. Thanks for the post, Bobby53

 

Someone really should put Bobby on the payroll around here..

 

Seriously. ShamWOW and LazyRaider are both awesome and exceptionally well-supported products.

 

I agree.

 

Gentoo / SeniorChang /timotyman, Thank you for the kind words! I appreciate you taking the time to let me know these items have worked well for you! +rep and good luck with your Shaman and LazyRaiding! Bobby53

 

Hey Bobby... I was using version 4.15 and I recently changed to version 4.19. I Noticed that you changed party settings, so that the bot doesn't cast riptide other than for the tidal waves buff. You set it to zero in your default configuration. Why did you do that? If I wanted it back, what number should i put in the input box?

 

hbaioni, Riptide should have been set to 0 for you a long time ago. If not possibly due to preserving your existing config values.

It is typically best to use Riptide to buff other aspects of healing:
- Increase heal on initial target of a Chain Heal
- Make sure Tidal Waves buff is kept up
- Rolling Riptide bufffs to generate mana if you have the Tier 12 Resto Set
- etc.
So by setting it to 0, you save Riptide's cooldown so it is only used for buffing other things like Tidal Wave rather than direct healing.

To restore the behavior from a long time ago, click the Party Heal Default Values button then make the following changes:

89 Riptide
88 Chain Heal
​

If you have 2 or more pcs of T12, I don't recommend using those settings. Thanks for the post and good luck with your Shaman, Bobby53

 

*NEW* ShamWOW 4.5.20 available for download!

The newest new version of ShamWOW is version 4.5.20 and available from Post #1 in this thread. It contains a number of fixes as well as some new features. Read the Change History excerpted below for more details.

Important! Un-ZIP the entire download (both Config folder and ShamWOW folder) otherwise you will be missing config information needed for one of the new features.

Note: if you are not familiar with how to post in the ShamWOW thread, please visit the ShamWOW Frequently Asked Questions [CLICK HERE]. FAQ #1 explains the information I need to accurately respond to your question, research request, or issue post. Thanks for your help in improving ShamWOW by providing clear posts containing all the information needed.

In the event of a problem that you cannot work around in the new release, you can still download the prior version 4.5.19 and reinstall it if needed from the same post.

Changes Revision 4.5.20

 

Hey Bobby, first of all your cc is great but I do experience the issue where it spams call of the elements sometimes before starting to heal. Also, i noticed that even though I ticked the disable targeting whilst movement is disabled box it still switched targets. I?ve attached a log below and once again thanks for the great cc

 

pkinrules, Thanks for the post and the log file. If possible you'll want to indicate in issue posts the local system time that you noticed the problem. Details on how to obtain and post that info are in the ShamWOW Frequently Asked Questions [CLICK HERE]. A simpler way to identify the place you encountered a problem would be to use the LOGMARK plugin [CLICK HERE] which will still work even while CC's are disabled because of the way its designed.

Call of the Elements spam - this appears to be related to the list of totems that HonorBuddy maintains not being refreshed. In other words it casts the totems, then a little while later it checks the list to see if any are missing (destroyed, out of range, etc.) Since none are present in the list it casts them again. The cycle repeats a few secs later and they are cast again. This can be due to the FPS being higher than your system will support. I would try backing it off to 15 FPS and see if it reoccurs. I'll look at adding in a delay

Target Switching - the option described only turns off ShamWOW targeting. It doesn't prevent other components from targeting. LazyRaider Auto Targeting was enabled in the log attached, so the switching you saw was due to it. Turn that off and you should be fully in control of the DPS target selection.

Thanks for the post and good luck with your Shaman, Bobby53

 

Hello!
Thanks very much for this. I have a problem and i hoped that someone could help me.
My bot is placing totems several times, sometimes it places same totem 2-6 times. How can i fix this? Please help me.

Thanks in advance!
Kind Regards

 

jadu, Thanks for the post. You will want to review FAQ #1 in the ShamWOW Frequently Asked Questions [CLICK HERE]. There you will find steps on how to provide the information needed for me to look into this for you. Thanks again and good luck with your Shaman, Bobby53

 

Just want to say thank you to all ShamWOW users! At the time of this post, 222 downloads of most recent version and only one post with a potential issue. Thanks for your help in providing a complete class for all purposes and let me know of any issues you encounter. Please be sure to visit the ShamWOW Frequently Asked Questions [CLICK HERE] if you aren't familiar with the information needed for posting an issue in the thread.

Thanks and best of luck to all Shaman, Bobby53

 

Bobby, I have to say that the newest update is awesome with the focus interrupt and pvp grounding totem change. Thanks for the hard work and dedication to this project

 

SpigotStyle, Thank you for the feedback! +rep and good luck with your Shaman, Bobby53

 

Not healing

Loaded the most recent version to replace .19 Prior this was a beast in arena, now it doesnt really do anything....think it casts earth shield and that is it?
View attachment 6-5-2012_9_29 AM 7700 Log.txt

 

SkiCycleFun: Thank you for the post and log file! There is an unexpected situation with the crowd control checking that I enabled for Resto in the .20 release that wasn't caught until your log, so thank you very much for submitting. Basically ShamWOW incorrectly thought you were crowd controlled when it saw the Gold Team aura and kept waiting for it to wear off before you could cast (hence it did nothing.) I am fixing in the .21 release, but until then you'll want to use the .19 release for arena. I am assuming this is true of rated bgs also.

As an aside, you have a compile and or runtime error with almost every component installed. I suggest doing a Shutdown+Restart to clear out memory (it has been over 7 days.) Reattempt running a battleground (or anything for that matter) and if you are still getting all these error messages in your log file, you will want to create a new installation of HonorBuddy and ShamWOW without any plug-ins and then introduce plug-ins one at a time until you either return to the working config you want or you have identified what caused the issue.

Thanks for the post and good luck with your Shaman, Bobby53

 

awesome ty