ShamWOW for HB2 - An Enhance/Elemental/Resto + PVP/RaF Healbot by Bobby53

hey Bob, it worked today somehow but still takes 30 sec to start after i press start and 30 sec to stop after i press stop and says that some errors are ocuring log attached

 

HB7032V76, Based upon your description on your system you will need to disable the Lock Memory option (uncheck.) If that is not enough, you may need to reduce the FPS setting also. There were two errors: GuildInviter issued one and the one at the end can be ignored (you will sometimes have an error message displayed when stopping the bot because of how that is performed.) Thanks for the post and good luck with your Shaman, Bobby53

 

HonorBuddy Mode: Quest
Shamans Location: Twilight Highlands
What should have happened (be specific): Release corpse^^
What did happen (be specific): Shaman died => Shamwow still tries to heal up​

Computer time of problem or log mark ​

(not realm time)​

: [20:38:39:097]

This has happened multiple times in Uldum and Deepholm too (Deepholm on Zoltrak but there was an error in the Qbehaviour too) but unfortunately I don't have the log for these.

greetz

Weischbier​

 

"Based upon your description on your system you will need to disable the Lock Memory option (uncheck.)"

i went google ofc

"

1. On the Start menu, click Run. In the Open box, type gpedit.msc.
   The Group Policy dialog box opens.
   
2. On the Group Policy console, expand Computer Configuration, and then expand Windows Settings.
   
3. Expand Security Settings, and then expand Local Policies.
   
4. Select the User Rights Assignment folder.
   The policies will be displayed in the details pane.
   
5. In the pane, double-click Lock pages in memory.
   
6. In the Local Security Policy Setting dialog box, select the account with privileges to run sqlservr.exe and click Remove."
   
   i had nothing in there to remove so i guess is ok, ill do complete clean reinstall of HB , and get rid of some plugins to see how is going, did this before with no luck since new 4521 shamwow, maybe ill get back to old one since is no change for me
   
   anyway big thanks for your time and work
   

 

HB7032V76, Typo on my part. My apologies. Uncheck the "Frame Lock" option in LazyRaider. -Bobby53

 

Hey Bobby!

I love your cc very much!
So far, I am having a problem with "Wind Shear" Interrupt during Battleground, Arena and Player vs. Player.
I tested with "Focus Target" , "Current Target" and selected "All Targets" under the general tab and still not working.

Please advice. Thanks

 

@bobby53

Probably nothing you can do about this bobby, but the quest ( Resonating Blow - Quest - World of Warcraft ) where you jump from boulder to boulder killing the dragon, is kind of wonky with ShamWoW. Basically, the shaman jumps from boulder to boulder continuously trying to call totems and occasionally casting a shock or lightning bolt. It may need a quest behavior or something else, and may not be the CC itself, but I figured I'd drop a line letting you know the CC acts weird here by doing what I mentioned above.

 

zeldrak, Thanks for the post! An existing Quest Behavior named ResonatingBlow.cs is used for that quest it handles the movement between rocks and hopefully also chooses rocks that have bubbles on them providing buffs to aid you in the fight. So based on the description and the number of hops you may want to pass that part along to Kick.

There does seem to also be a ShamWOW issue in that the mob has a large hitbox and is within melee range, however it is being viewed as being outside of melee so is only fighting with ranged attacks. The result is an agonizingly long fight because of an Enhancement using infrequent ranged attacks with no buffs. There was also some oddness with casting/recalling totems due to the platforms causing HB to report the totems are 70+ yards away even though they were set on the same rock. I'll look into that as well.

Thanks for the post, Bobby53

 

rkem, Glad you are enjoying it! There isn't enough information for me to assist however. Please visit the ShamWOW Frequently Asked Questions [CLICK HERE] for steps on the information needed when posting anything you would like me to research or respond to. Thanks for the post and good luck with your Shaman, Bobby53

 

Yeah, I thought as much about the QB. I did notice it tended to like jumping on the rocks with fire on them, lol. I made it through the quest with no issues, but found it funny that I kept calling my totems on every hop, and sometimes two or three times per hop, then it would cast a lightning bolt or a shock, rinse and repeat. It was pretty slow going, but I made it just fine. Thanks for looking into it.

Also, just ran a LFR DS with ShamWoW and got many complements on my healing abilities. My shaman is only ilevel 377 (still using 346 shoulders, and nothing is dropping from HoT yet) and has crazy mana regen since I opted for regen and not throughput. I often sit at 80-100k mana through an entire dungeon unless I have a poor tank that's squishy, then I sit at about 30k constant. The CC works exceptionally well.

 

zeldrak, Thanks for passing along your ShamWOW success! +rep Glad to hear it is working well. I believe I have the melee distance issue encountered on that quest worked out, so just need to get a char that hasn't done it to test. Will have to wait until then to look into the totems being out of range as soon as they are dropped though as well.

Thanks again for the detailed post and the feedback, and as always good luck with your Shaman, Bobby53

 

Anytime bobby, anytime.

 

weischbier, Thank you for the log and taking the time to make a detailed post. At the time referenced, there appears to be only one heal cast attempt while the Shaman was dead and that one appears to have already been in progress when he died. All the subsequent cast attempts while dead were either HonorBuddy or the Quest bot trying to cast your Ebon Gryphon mount. It does appear to have been stuck in cycle of infinite mount attempts however. I'll review again to make sure there weren't any other deaths in the log showing repeated heal casts while dead, but as of now it seems okay except for the mount behavior. That may be worth posting in the HB Support Issues thread since it appears to be an internal item. Thanks, Bobby53

EDIT: I did notice an issue in your log however that I have already factored into improving ShamWOW Healing. When GHW was cast one of the attackers interrupted it, however you weren't silenced. It quickly tried to reattempt a GHW and that spell was still temporarily blacklisted. I revised so that when HB reports a spell cast failed I'll remove the spell from the temporary blacklisted. It also appears to have locked into a target about 18 yds away so started moving in the middle of a GHW cast. Typically when this occurs its Bot related movement, but in this case it appears to be ShamWOW, so I'll still need to look into that part. Thanks for the post again, Bobby53

 

How come Hex is grayed out in the PvP options when you're a healer?

 

i just used this for the past 2 days to max out my gear in heroic, and i have to say one thing!

besides Honorbuddy, this is the best thing ive used in a very, VERY long time, thank you very much, and keep up the good work!

 

pls fix the evading/bugged mobs part in the cc
ver 4521

TEST RELEASE not work

 

Karold, Thanks for the post. Please read FAQ #1 in the ShamWOW Frequently Asked Questions [CLICK HERE]. You'll need to provide the information I carefully described there for any issue you would like me to look into. For an Evade bugged mob issue it is essential you provide the complete debug log, the local system time as hh:mm:ss that you noticed it in combat with an Evade bugged mob, and ideally the name of the mob. Without that detail I won't be able to assist you. Good luck with your Shaman, Bobby53

 

+rep for you bobby, works perfect for my shaman. atm lv 44

was wondering if bot automatically uses trinkets?

thanks

 

bone2sign, HonorBuddy and whichever Bot you are using (Questing, InstanceBuddy, etc.) do not automatically use Trinkets. ShamWOW automatically recognizes most /use trinkets, determines whether it is used for buffing combat, pvp, healing, restoring health, or restoring mana and then automatically uses it appropriately. You can tell whether ShamWOW recognizes your Use: trinket when you initially press the Start button when it displays a message similar to:

Code:

Detected Health Trinket:  Defiler's Talisman
Detected Mana Trinket:  Core of Ripeness

and so on. Combat trinkets are used when combat begins. Other trinkets are used based upon the settings in Class Config. Review that dialog for additional info, but for leveling the default behavior should work well. Engineering tinkers (enchants) are recognized and used as well if you have or were thinking of getting that profession.

Alternatively there are plug-ins you can use that give you a different level of control. I don't use these so you would check the Plug-ins section of the forum and see what is offered.

Note: if a message is not displayed indicating your Use: trinket was recognized, then it won't be used. Please advise if there is a trinket with a Use: ability that is not recognized you wish to be added.

Thanks for the post and good luck with your Shaman, Bobby53

 

HonorBuddy Mode: Grind/PVP/Mixed/Quest/RaF

Shamans Location: PVP (Enhance Shaman)

What should have happened (be specific): Cast water walking and buffs ONCE then go and fight.

What did happen (be specific):Continously casting Water walking and ghost wolf over and over. Also when he sees combat hell stop, cast ghostwolf then stop, then cast ghostwolf, then target mob and then go back ghostwolf over and over. Sometimes he might run to the target and kill. Also hell run to target well atleast 40 yards away then cast spirit wolves then cast ghostwolf then shiftform again and cast something like frostshock then ghostwolf again. Would be nice if it'll run smoothly but im no coder.

Computer time of problem or log mark (not realm time): 10:30Pm

View attachment 6-28-2012_10_08 PM 2708 Log.txt