[A3 - Inferno] Champion Hunting (Updated Post)

Yeah so my bot was acting up this morning before I headed out. It was stuck in Cydea area just sitting at the stairs. I accidently had both inactivity timers set to zero. 15 hours later the bot was still sitting in the same spot casting war cry lol.

Not sure why but the bot is getting stuck at cydea on a regular basis and its on the correct quest, not on azmodan like you suggested.

Any idea why it is getting stuck there? Also if my inactivity timer is set to 3 what does that mean exactly? Will I time out in this situation and start a new run? My demon buddy reads

01:04:58.096 N] [RadsAtom] - Loading next profile: D:\DemonBuddy\Acronic-A3CH-217ca6e\[A3 - Inferno]Champion-Hunting 1.3.6.3 BigRed\BigRed_CursedHeart.xml
[01:04:58.096 N] [RadsAtom] - Resetting the deathcounter.
[01:05:03.131 N] [RadsAtom] - Loading next profile: D:\DemonBuddy\Acronic-A3CH-217ca6e\[A3 - Inferno]Champion-Hunting 1.3.6.3 BigRed\BigRed_CursedHeart.xml
[01:05:03.131 N] [RadsAtom] - Resetting the deathcounter.
[01:05:08.202 N] [RadsAtom] - Loading next profile: D:\DemonBuddy\Acronic-A3CH-217ca6e\[A3 - Inferno]Champion-Hunting 1.3.6.3 BigRed\BigRed_CursedHeart.xml
[01:05:08.202 N] [RadsAtom] - Resetting the deathcounter.
[01:05:13.232 N] [RadsAtom] - Loading next profile: D:\DemonBuddy\Acronic-A3CH-217ca6e\[A3 - Inferno]Champion-Hunting 1.3.6.3 BigRed\BigRed_CursedHeart.xml
[01:05:13.232 N] [RadsAtom] - Resetting the deathcounter.
[01:05:18.272 N] [RadsAtom] - Loading next profile: D:\DemonBuddy\Acronic-A3CH-217ca6e\[A3 - Inferno]Champion-Hunting 1.3.6.3 BigRed\BigRed_CursedHeart.xml
[01:05:18.272 N] [RadsAtom] - Resetting the deathcounter.
[01:05:23.312 N] [RadsAtom] - Loading next profile: D:\DemonBuddy\Acronic-A3CH-217ca6e\[A3 - Inferno]Champion-Hunting 1.3.6.3 BigRed\BigRed_CursedHeart.xml
[01:05:23.312 N] [RadsAtom] - Resetting the deathcounter.
[01:05:28.362 N] [RadsAtom] - Loading next profile: D:\DemonBuddy\Acronic-A3CH-217ca6e\[A3 - Inferno]Champion-Hunting 1.3.6.3 BigRed\BigRed_CursedHeart.xml
[01:05:28.362 N] [RadsAtom] - Resetting the deathcounter.
[01:05:33.432 N] [RadsAtom] - Loading next profile: D:\DemonBuddy\Acronic-A3CH-217ca6e\[A3 - Inferno]Champion-Hunting 1.3.6.3 BigRed\BigRed_CursedHeart.xml
[01:05:33.432 N] [RadsAtom] - Resetting the deathcounter.

Over and over. Is this considered inactive?

I guess what I am asking is how do I avoid this from happening for extended periods of time? I am fairly new to DB (1 day) so forgive my ignorance.

 

Hey Guys

First wanna say, GREAT Profile! run it on the first day and haven't changed since.

1 thing I would recommend tho is, (if its possible) when u die, instead of running the whole lvl again (e.g. go to every corner/dead end tracks) just carry on from where he died. As in run as quickly as possible to the spot he dead and start from there.

hope you know what i mean.

as in,
Step
1
2
3
4
die
(start from 4 instead of start from 1 again)
4
5
6
7

Cheers

 

[01:44:20.624 N] Loaded profile
[01:44:20.625 N] ****************************************************
[01:44:20.625 N] WARNING: Giles Trinity is NOT YET ENABLED. Bot start detected
[01:44:20.625 N] ****************************************************
[01:44:20.625 N] Ignore this message if you are not currently using Giles Trinity.

 

please help me

 

like did it right. run the bot, and nothing happens. only writes [01:58:29.015 N] Loaded profile
[01:58:29.101 N] ****************************************************
[01:58:29.101 N] WARNING: Giles Trinity is NOT YET ENABLED. Bot start detected
[01:58:29.101 N] ****************************************************
[01:58:29.101 N] Ignore this message if you are not currently using Giles Trinity.

please help mee!!!

 

You should probably enable gilestrinity and RadsAtom.

 

My character seems to get stuck at the dungeon that spawns sometimes on Rakkis Crossing I think its called underbridge is there anyway to stop him from going into there?

 

Check the first post, there's a link to a version that doesn't run underbridge or forward barracks.

 

I keep stopping after an hour or two. Most of the time it stops right in town after taking a portal:
[22:44:47.369 N] ========== Grid segmentation resetting!!! ============
[22:45:30.831 N] ========== Grid segmentation resetting!!! ============
[22:49:43.686 N] ========== Grid segmentation resetting!!! ============

Any ideas?

 

My bot was looping between all profiles after everything was cleared, is there any way to avoid that problem? It doesn't happen all the time but it does sometimes, so just wondering

 

Are you using RadsAtom? Is it enabled?
Also, make sure you DELETED RadsProfileManager, if you ever used that.

 

big props for answering so fast, you got it exactly right. Thanks a lot, buddy!

 

Anyone? please?

 

Hi there ! Really nice profile

But i have a problem:

The bot stops after 2H runs and stay in game menu...

Someone knows why ?

Tyvm

 

Is your radsatom set on a break schedule?

 

I get stuck on barricades often, is there a way to get around this? Or to treat the barricades just like the breakable objects?

by the way great job on all of this, and thank you

 

Guys, how many elite packs/h do u get with this profile? wondering if it is worth for me to try it..

 

Its because of the inactivity timer in rads conflicting with DB's. I believe (tho this could be backwards) i set Db's to longer than rads, and it fixed it.

 

[13:15:51.099 N] Profile completed
[13:15:51.099 N] Number of games completed:1
[13:16:23.236 N] [GilesTrinity] Goblin #6 in sight. Distance=54,84532
[13:20:24.197 N] Inactivity timer tripped! Leaving game
[13:20:24.198 N] Leaving game
[13:20:24.213 N] Last run acquired 615270 gold.

does this evry run. getting old.
i have no breaks or anything set in rads.
so it makes no sense.

only using radsatom & giles

any clues ?

 

Can someone please confirm this for me. If it goes through Stonefort, will it find the warden and pick up the key for you? If not, how can i program it to do that?

Thank you.