[Stable] Honorbuddy 1.9.5.0

Some times you have to remove Z coordinates from vendor position..Some Z positions became wrong after the patch.

 

The spam with
"[12:07:46 PM:927] Changed POI to: Type: None, Loc: <0, 0, 0>"
is also caused by the bot getting stuck into combat and attempting to find a another target till it drops combat.
I've noticed this while grinding on the Cultists in Sholazar. They would drop bombs that would keep the bot in combat even if the main target died.

Sidenote:
The current activity thingy doesn't always report the current action...like moving to hotspot.
It shows last "ofensive action" like looting the mob...and it remains the same way till the next mob is engaged. Not a important bug just a small GUI problem.

 

Ok so for some reason when i deleted the old one and unzipped the new one the shortcut i had for the old one found it in my damn recycle bin hence no kill options. However i now have a new/old issue:

What is your toon's class? [Druid, Paladin, Warlock, etc]
Pally
What is your toon's race? [Troll, Orc, Human, etc]
Drenai
What CC were you using?
Convalesce
What profile were you using?
Winterspring sabre one
List any plugins you were using:
none
What area did the bug occur in (Please be as specific as possible. Use the minimap's area text for the current area)?
i pressed "start" lol
What was your toon's position when the bug occurred (X, Y, Z coordinates)?
no firggin idea however it doesnt even matter, it happens where ever i happen to start the bot
What type of bug are you reporting? (Crash, Navigation, quest bug, 'can't make up your mind', etc)
navigation/meshing/prifle issues
What was the bot's current action? (Check your logs)
i had just pressed start and it should have been going to hotspots
Explain the bug in as much detail as you can:
ok since the 1.9 patches the bot will download the meshs on intiial use in any given zone. the bot will generally work fine on the first go in that zone. If i then go back to that zone and the mesh is already dl'ed it then bugs out and says there are no defined hotspots etc etc. If i delete the mesh and start bot again it will dl meshes then move off to do what its suppose to do. i however dont wish to redownload the mesh each time i farm :s

Steps to reproduce the above bug:
I can post as many logs as you like.
Attach your log file(s)
Attach any crash report(s) [These may be the WoW crash dump, or simply a .NET exception]

Anything else the dev team should know?


Attach your log file(s)
Done
Attach any crash report(s) [These may be the WoW crash dump, or simply a .NET exception]
n/a
Anything else the dev team should know?
I like pie and cookies?

 

nothing changes if i remove Z

 

What is your toon's class? [Druid, Paladin, Warlock, etc]
Warrior
What is your toon's race? [Troll, Orc, Human, etc]
Dwarf
What CC were you using?
Default
What profile were you using?
Dward 1-60 questing
List any plugins you were using:
ejump, erefreshment
What area did the bug occur in (Please be as specific as possible. Use the minimap's area text for the current area)?
Dwarf starting area
What type of bug are you reporting? (Crash, Navigation, quest bug, 'can't make up your mind', etc)
Questing
What was the bot's current action? (Check your logs)
Handing in Quest / Accepting new one
Explain the bug in as much detail as you can:
When handing in a quest & accepting a new one the bot frequently stops and doesn't move or do anything after handing it in. Have to click stop/start to get him moving again


Attach your log file(s)
Done

 

Skinning doesnt work with this version. The deves I think know about it but if not you do now. All settings checked for skinning but it just kills, loots and moves on. Cant post my Log file as wow is offline atm

 

Curious; why does not everyone have this bug then? What triggers it specifically? Otherwise everyone should encounter this but that is clearly not the case.

 

Hello you have Russian client of wow?

 

Nope, EU (English) version.

 

What is your toon's class? [Druid, Paladin, Warlock, etc]

Hunter

What is your toon's race? [Troll, Orc, Human, etc]

Troll

What CC were you using?

Default

What profile were you using?
1-20 Human Paladin Mordd and Breakneck 1.1

List any plugins you were using:


What area did the bug occur in (Please be as specific as possible. Use the minimap's area text for the current area)?

Sentinel Hill

What was your toon's position when the bug occurred (X, Y, Z coordinates)?

<Hotspot X="-10657.82" Y="996.9945" Z="32.872" />

What type of bug are you reporting? (Crash, Navigation, quest bug, 'can't make up your mind', etc)

Stands next to NPC but it doesnt target him. Went like this all night long.

What was the bot's current action? (Check your logs)

Activity :Resting
blinking to
Activity :Resting - POI: Type: Sell, Name: William Macgregor


Started with:
[1:23:13 AM:418] Object reference not set to an instance of an object. - From: Honorbuddy
[1:23:13 AM:426] Changed POI to: Type: None, Loc: <0, 0, 0>
[1:23:13 AM:872] Changed POI to: Type: Sell, Name: William Macgregor
[1:23:14 AM:455] Changed POI to: Type: None, Loc: <0, 0, 0>
[1:23:14 AM:904] Changed POI to: Type: Sell, Name: William Macgregor
[1:23:15 AM:489] Changed POI to: Type: None, Loc: <0, 0, 0>
[1:23:15 AM:938] Changed POI to: Type: Sell, Name: William Macgregor

Then infinite loop of
[1:23:15 AM:489] Changed POI to: Type: None, Loc: <0, 0, 0>
[1:23:15 AM:938] Changed POI to: Type: Sell, Name: William Macgregor

Explain the bug in as much detail as you can:

The bot stops near a NPC and it doesn't click on him or target him.

 

as otheres have said, big bug with skinning.

Basically, the bot will kill one mob.. loot, go kill the next mob (whether 40 yds or 80 yds away), loot the 2nd mob, then go back to skinning the first mob.. over and over without fail for me.

 

Same here.

 

Probably the same error we have, "Loc: <0, 0, 0>" while questing. Only at a different point in botting. Looks like a big bug.

 

You answered on your question.

 

What is your toon's class? [Druid, Paladin, Warlock, etc]
Paladin
What is your toon's race? [Troll, Orc, Human, etc]
Human
What CC were you using?
Default
What profile were you using?
Handmade for skining
List any plugins you were using:
None
What area did the bug occur in (Please be as specific as possible. Use the minimap's area text for the current area)?
Hinterlands for example
What was your toon's position when the bug occurred (X, Y, Z coordinates)?
<Hotspot X="187.0354" Y="-2377.066" Z="127.0872" />
What type of bug are you reporting? (Crash, Navigation, quest bug, 'can't make up your mind', etc)
Skining mechanics
What was the bot's current action? (Check your logs)
Interacting with lootable Облезлый среброгрив
Activity: Looting Облезлый среброгрив.
Moving to Type: Skin, Name: Облезлый среброгрив
Moving to Type: Skin, Name: Облезлый среброгрив
Interacting with lootable Облезлый среброгрив
Interacting with lootable Облезлый среброгрив
Explain the bug in as much detail as you can:
Sometimes HB hang in action. Keeping skining spell in hand and just running around w/o any other actions followe hotspots from profile. And only if some one attack them, only then he return to normal actions.
Seems it's happens coz he trying skin a mob twice.

And one more:
bot's current action (Debug Log):
[18:20:43:404] Changed POI to: Type: None, Loc: <0, 0, 0>
[18:20:43:520] Changed POI to: Type: Loot, Name: Облезлый среброгрив
[18:20:43:642] interact: 0x0EE23430
[18:20:43:670] interact done: 0x0EE23430
[18:20:45:482] Changed POI to: Type: None, Loc: <0, 0, 0>
[18:20:48:533] Changed POI to: Type: Skin, Name: Облезлый среброгрив
[18:20:51:795] interact: 0x0EE23430
[18:20:51:822] interact done: 0x0EE23430

Explanation:
HB loot mob and trying to move away. Then he looks like remember what he must also skin that mob and returning to them. And that happens mostly after killin single mob.
Sometimes Hb just skiping skinable mobs even if "Ninja skining" is on.

 

An example:

Mulgore lvl3, the bot accepted "Attack on Camp narache" from the scroll on the ground.
It has "Break Sharptusk" "The Battleboars" and "Rites of Strength" in the log and should do all three.
It walks miles to find mobs for "the battleboars" even if there are lots of mobs for "rites of strength" right in front of you.
I think HB should kill them .

Then it hands in one of them, walks back to the ravine, does the next, walks to the camp, turns it in, can we override that somehow?

 

But, the bug is not only for non-english clients. I have it on an English client as well. Continuously; doens't matter what I am doing or on what part the questline is.

 

I underlined what is most likely causing your problem, you are running profiles with the HUMAN startzone while you are horde in another part of the world. The NPC its trying to target is an Alliance NPC..

 

Everyone does. Try misspelling a vendor name or even getting the case wrong. It won't interact.