@hxcadam: Have you added the ghosts/spikes/traps to the Trinity blacklist? Could you post your entire log if possible? @R4g470kk: I've tested the profile with my barb and it could destroy the Corrupted Growth with attack range > 20, a Monk should be able to do the same, but I will test it with my monk to see if the value needs some tweaks.
With my DH I'm usually in 1.5 games per hour, but DH's are squishy and I die sometimes. With a good geared character it might be more. @R4g470kk: I've tested the run with my Monk and using kill radius of 20 and I don't find any problem. The monk killed the Corrupted Growth using only Fists of Thunder
i can post the log here but its lengthy so i will message you it so i do not clutter up the thread. P.S. thanks for the response i do appreciate it. unfortunately it is too big for either and that is with starting a new log. is there some other way i can get it to you?
@hxcadam: Zip it, upload the file to dropbox or mediafire for example and PM the link so I can check it.
Great profile though the with diablo version has an issue. Once it kills diablo it goes to town and leaves the game, but that's actually a checkpoint where you're supposed to talk to the angel. If you talk to the angel it cues the credits and sticks you back in a1 so the best bet would probably be to leave game as it currently does BUT reset the quest before starting the next run. No idea how viable that is but something to consider. Edit: Diablo had been stay dead between game changes but as of my last run it's working fine, no idea what I changed but thanks again for a great profile.
@ori: Quest is reset. The profile creates a new game everytime you load the START_HERE.xml. If quest wouldn't reset, you couldn't kill Diablo again...
Started up the profile this morning, made the noted changes (because I like to read the thread first for possible issues, CRAZY!), and everything has been great. I like to babysit my profiles at work while running SplashTop and I haven't been stuck on ghosts, fissures, or corruption. Thanks for the great Act IV profile! About to be done with Silver Spire lvl 1 and no snags. I'll try to update when I take out Diablo. Edit: Went through all of Act IV without a problem. No stucks in logs, no standing around idling trying to attack non-enemies, and Diablo was slaughtered surprisingly fast. Excellent. To anyone that is having problems, READ THE REST OF THIS THREAD!
i did add the required numbers to my blacklist and i have the right plugins running im not sure whats wrong. is there multiple blacklists in trinity if so which one do i put these values under?
I only added the numbers at the end of the blacklist and it worked fine immediately after restarting DB. Did you restart DB yet after making the changes to the plugin? Also, I had an issue with the profile so far. When my toon teleports back to town before Pinnacle of Heaven, it gets stuck and doesn't move after moving through the town portal from Silver Spire lvl 2. It's only happened once that I've noticed. When I came back to my computer, my logs were full of this: [22:14:18.055 V] Path generation failed! Unknown world ID 178152! [22:14:19.055 V] Path generation failed! Unknown world ID 178152! [22:14:20.055 V] Path generation failed! Unknown world ID 178152! [22:14:21.135 V] Path generation failed! Unknown world ID 178152! [22:14:22.065 V] Path generation failed! Unknown world ID 178152! I was still stuck in town, not moving from the town portal. Although, when I moved closer to the waypoint, I was immediately taken to Pinnacle. Also, after defeating Diablo, I teleported back to town, but then my character got on the waypoint and headed to the first waypoint of the act. Then it started to leave the game.
I got a crash on diablo on my first run Code: [03:53:28.915 D] Replaced hook [ProfileOrderBehavior_Hook] 59e70ec1-3ab2-42e5-a5a7-b8940dd54da0 [03:53:33.054 D] Replaced hook [ProfileOrderBehavior_Hook] a3597b91-1448-480d-b718-9bfdcdcb40a2 [03:53:35.283 D] Replaced hook [ProfileOrderBehavior_Hook] 5b4bb718-3459-4d90-938d-929cd7601601 [03:53:35.283 D] Generating path to Interact with object - <279.5247, 280.0806, 1.525879E-05> [03:53:35.336 D] Successfully generated path from {X=118,Y=116} to {X=112,Y=112} in 00:00:00.0000786 with 7(3) hops [03:53:35.336 D] Client path generated. [03:53:35.336 D] Generated path to <279.5247, 280.0806, 1.525879E-05> (Interact with object) with 3 hops. [03:53:35.419 N] Interacting with object Boss_Portal_Diablo-27312 [03:53:36.435 D] Navigator.Clear [03:53:38.652 D] Replaced hook [ProfileOrderBehavior_Hook] 4e28d31d-d4b6-4768-b20d-47689bc5ac3c [03:53:38.652 D] [GilesTrinity] We still run smoothly [03:53:41.790 N] ========== Grid segmentation resetting!!! ============ [03:53:43.654 N] [UnstuckMe!] 508.6615 yards traveld with 22 points [03:53:43.743 D] Replaced hook [ProfileOrderBehavior_Hook] 21df24ca-1d35-42ce-aa21-f2285e858711 [03:53:48.132 D] Replaced hook [ProfileOrderBehavior_Hook] bbf6b987-c477-4b23-be87-2b2331c41088 [03:53:53.749 D] [GilesTrinity] Skipping ahead from moveto <454.8848, 452.128, 40.18874> to next moveto. [03:53:53.828 D] Replaced hook [ProfileOrderBehavior_Hook] f4058061-4f23-4dcb-9420-deb445d3736f [03:53:54.387 N] [RadsAtom] - Canceling cutscene. [03:53:54.393 D] Replaced hook [ProfileOrderBehavior_Hook] 41c36ebf-20de-489f-b538-8297f0116b6c [03:53:54.420 N] [RadsAtom] - Canceling cutscene. [03:53:59.418 N] [GilesTrinity] Berserk being used! [03:54:09.458 N] [RadsAtom] - Canceling cutscene. [03:54:11.585 N] ========== Grid segmentation resetting!!! ============ [03:54:11.981 N] [RadsAtom] - Canceling cutscene. [03:54:13.486 D] [GilesTrinity] Skipping ahead from moveto <363.8605, 361.7157, 40.61041> to next moveto. [03:54:13.535 N] [RadsAtom] - Canceling cutscene. [03:54:13.565 D] Replaced hook [ProfileOrderBehavior_Hook] 6d1a161d-9466-447e-8b95-b6fd63adfa48 [03:54:13.616 N] [RadsAtom] - Canceling cutscene. [03:54:15.162 N] Closing error dialog [03:54:17.511 N] [RadsAtom] - Canceling cutscene. tried over and over now same thing crashes when going to phase two cutscene for me using 1.5.1 atom
You can check for this phrase "IGNORE LIST / BLACKLIST - for units / monsters / npcs" and enter them below or you can use the unified Trinity plugin (it gots the IDs already set). Also I've been checking your log and I've seen that the inactivity timer triped. Which one are you using? Rads or DBs? I will take a look and see why the bot did that, so I can fix it. The only think I can think of is that maybe unstuckme plugin is being in conflict with either Trinity or Atom (unstuckme can either unstuck and skip cutscenes).
as far as i know its radsatom im not able to get into the config when i do click on the config button nothing happens but on my settings tab in DB i have the inactivity time set to 299 so im pretty sure its radsatom.
You should be able to load the config options of RadsAtom. If you can't I suggest you delete the folder "CompiledAssemblies" in DB root folder, RadsAtom settings inside the "Settings" folder and reinstall RadsAtom.
i tried this but the config button is still grayed out unfortunately, i went ahead and tried to run the profile again but again he gets to GoH2 and doesnt move.
Lets try a couple of things: 1) Check DB Settings tab and check that Inactivity Time is set to 0. 2) Check DB Plugins tab and disable (unmark/untick) RadsAtom. 3) Run the profile. If you get stuck again, please take a screenshot so I can see where could be the problem and the point where the bot stops, also PM me the log.
did this but when i disable radsatom my toon does nothing, when i enabled it again he moves but still gets stuck in the same spot im sending a mediafire to you which is the new logs and the screen shot will be included in the message. thanks for looking into this i do appreciate it
End of Profile Hi, first of all thanx for the profile and time spent. I did all the steps and it seems to be working. I have only one proble. When the last profile is done my char returns to town and then teleports to gardens lvl 1 and starts the whole thing again without leaving the game and starting a new one. Any idea how I can fix that? thanks a lot. kndrgds
Last line of last profile is <Continue profile="AzureusPT_START_HERE.xml" exitgame="true" />, so you should find your char leaving the game and starting a new one. If not, check that you have the required plugins and configuration.
I'm having some problems. When its in the Shadow Realm and diablo vannishes for the second time, the bot thinks diablo is dead and tries to TP to town. [09:21:38.112 N] [RadsAtom] - Canceling cutscene. [09:21:38.977 N] [RadsAtom] - Canceling cutscene. [09:21:39.115 N] [RadsAtom] - Canceling cutscene. [09:21:57.554 N] Using town portal [09:22:06.464 N] Using town portal [09:22:17.119 N] Using town portal [09:22:27.860 N] Using town portal [09:22:35.899 N] [RadsAtom] - Canceling cutscene. [09:22:36.910 N] Using town portal [09:22:37.036 N] [RadsAtom] - Canceling cutscene. [09:22:37.641 N] ========== Grid segmentation resetting!!! ============ [09:22:37.898 N] [RadsAtom] - Canceling cutscene. [09:22:38.714 N] [RadsAtom] - Canceling cutscene. [09:23:33.943 N] Closing questreward dialog [09:23:34.017 N] Using town portal [09:23:40.327 N] Townportal successfull, we are in town! [09:23:40.717 N] ========== Grid segmentation resetting!!! ============ [09:23:40.942 N] Diablo killed, restarting! This time he managed to kill diablo, but most times it will resort to esc+leave game.
