He should not move if you disable movement. But if you right click the mob to attack, then he will go into meleerange. That's a Blizzard thing not a CC related. To attack just select a mob and push a skill, the CC will take over then.
Its working really great, and seing the current condition is good most of the stuff that could make it better are either advanced or minor. Atm it imo goes too fast into shadowform after being out to heal. When I am doing dailies with it and it encounter 5 mobs and get down to the low life it will spend around 1/3 of the gcd on switching back into shadowform. Its basicly just casting 1 flash heal, getting into what it thinks is a safe area , then goes into shadowform, then gets 1 dmg gcd off, then goes back to below the healing procentage , does 1x heal and it continues like that with it using another gcd to go back into shadowform. You could ofcourse just select a higher procentage life for it to back into shadowform but I suppose the most optimal would be if it could check if it was still taking dmg and how much, if it had either vampiric embrace ready, devouring plague 3 stacks ready or the mobs were about to die. If either the dmg taken in the last 3 seconds is still "high" or if non of the coldowns are avaible it should first switch into shadowform at a much higher procentage.
I changed it that way, that he don't go back in shadowform if his health lower than flash heal % settings.
i always have to chose between singular and your combat routine and the bot dont start automatic with your ... If i am AFK and the bot disconnects and want to relog, dont work. What i have to do that the bot always start your combat routine ... i tried to delete the singular priest folder, dont work please help I have in my HB Folder: C:\Users\ME\Desktop\HB\Routines\Singular\Settings\PriestSettings.cs is that so ok?
Those are the settings for singular. I think te best way is to make a separate HB folder with only 1 combat routine in it. I don't know anything about relog, but ask the developper if it's not possible to choose your routine in the config of the relog plugin. If you only have singular and you start HB, then he auto use the singular routine. Maybe if you only have my routine there, he will use it auto also.
Hi Pasterke I am thinking about using this cr for raiding but would like to ask a few questions if that is ok. 1. Does this cr work with lazy raider or tyrael? 2. Are the new talent changes solice and insanity working as in a insanity mind flay is allowed to do a full channel? 3. Does it handle aoe and can the timing for when to swap over to aoe from multi dotting be set manualy and can the duration of mind sear be set to do a full channel? Sorry for asking before having installed but I can play my priest very well and only use cr's for lazy mode and just wanted a idea of what features this bot offers. Good luck
Mind sear and Mind flay always do full channel, because interrupt a spell to cast a proc is generally dps loose. It works fine with lazyraider, but tyreal gives some problems. Tyrael don't use the Need Heal and Need Combatbuffs in a CC. Because I put all healing and protection skills in those sections ( avoiding to repeat code and holding the codes as less as possible) Tyrael don't work as intent. I prefer to use Combatbot. I'm thinking to make a priest CC like I did for a hunter (http://www.thebuddyforum.com/honorbuddy-forum/combat-routines/hunter/108700-sv-hunter-perfect-routine-make-yourself.html. But that's a lot of work
It would be great to have even more freedom as your hunter routine. I tried to use it in BG without any special botbase or plugin and it didn't buff before it reached combat (which is a really bad opener that it uses the first 3 gcd when in combat vs. a player). It should ofcourse just buff up when it ress in the bg.
The disable movement is not fully working. The bot still wants to move closer to a target if farther than 35m. Void Tendrils with Scream is a little iffy too. It fears then roots (usually missing targets) then tries to move too far back. It would be better to root then fear then step back only out of melee range say 5m. Works pretty damn good though. Code: [04:38:42.394 D] [CGSpellBook::CastSpell] Override ID: 589, KnownIndex: 64 [04:38:42.394 N] Shadow Word: Pain [04:38:43.616 D] [CGSpellBook::CastSpell] Override ID: 34914, KnownIndex: 70 [04:38:43.617 N] Vampiric Touch [04:38:44.858 D] Activity: Loading Tile/s [04:38:44.859 D] Loading MogushanPalace_28_24 [04:38:44.914 D] Could not generate path from {4031.924, 1868.238, 358.8401} to {4023.13, 1907.75, 368.0833} (time used: 0 milliseconds) @ FindEndPoly [04:38:46.302 D] Could not generate path from {4031.924, 1868.238, 358.8401} to {4023.13, 1907.75, 368.0833} (time used: 1 milliseconds) @ FindEndPoly [04:38:46.305 D] Could not generate path from {4031.924, 1868.238, 358.8401} to {4023.13, 1907.75, 368.0833} (time used: 0 milliseconds) @ FindEndPoly [04:38:47.241 D] Could not generate path from {4031.924, 1868.238, 358.8401} to {4023.13, 1907.75, 368.0833} (time used: 1 milliseconds) @ FindEndPoly [04:38:47.249 D] Could not generate path from {4031.924, 1868.238, 358.8401} to {4023.13, 1907.75, 368.0833} (time used: 0 milliseconds) @ FindEndPoly [04:38:47.813 D] Could not generate path from {4031.924, 1868.238, 358.8401} to {4023.13, 1907.75, 368.0833} (time used: 1 milliseconds) @ FindEndPoly [04:38:47.816 D] Could not generate path from {4031.924, 1868.238, 358.8401} to {4023.13, 1907.75, 368.0833} (time used: 0 milliseconds) @ FindEndPoly [04:38:48.355 D] Could not generate path from {4031.924, 1868.238, 358.8401} to {4023.13, 1907.75, 368.0833} (time used: 1 milliseconds) @ FindEndPoly [04:38:48.360 D] Could not generate path from {4031.924, 1868.238, 358.8401} to {4023.13, 1907.75, 368.0833} (time used: 0 milliseconds) @ FindEndPoly [04:38:48.663 D] Could not generate path from {4031.924, 1868.238, 358.8401} to {4023.13, 1907.75, 368.0833} (time used: 1 milliseconds) @ FindEndPoly [04:38:48.667 D] Could not generate path from {4031.924, 1868.238, 358.8401} to {4023.13, 1907.75, 368.0833} (time used: 0 milliseconds) @ FindEndPoly [04:38:49.382 D] Could not generate path from {4031.924, 1868.238, 358.8401} to {4023.13, 1907.75, 368.0833} (time used: 1 milliseconds) @ FindEndPoly [04:38:49.385 D] Could not generate path from {4031.924, 1868.238, 358.8401} to {4023.13, 1907.75, 368.0833} (time used: 0 milliseconds) @ FindEndPoly [04:38:51.117 N] Stopping the bot! [04:38:51.117 D] Stop called! [04:38:51.117 Q] Bot Stopped! Reason: User pressed the stop button [04:38:51.125 D] Could not generate path from {4031.924, 1868.238, 358.8401} to {4023.13, 1907.75, 368.0833} (time used: 0 milliseconds) @ FindEndPoly [04:38:51.136 D] Activity: Honorbuddy Stopped [04:38:51.138 D] Could not generate path from {4031.924, 1868.238, 358.8401} to {4023.13, 1907.75, 368.0833} (time used: 0 milliseconds) @ FindEndPoly [04:38:52.139 D] System.Threading.ThreadAbortException: Thread was being aborted. at Styx.CommonBot.TreeRoot.() at Styx.CommonBot.TreeRoot.() [04:38:52.142 D] System.Threading.ThreadAbortException: Thread was being aborted. at Styx.CommonBot.TreeRoot.() [04:38:52.139 D] System.Threading.ThreadAbortException: Thread was being aborted. at Styx.CommonBot.TreeRoot.() at Styx.CommonBot.TreeRoot.() [04:38:52.142 D] System.Threading.ThreadAbortException: Thread was being aborted. at Styx.CommonBot.TreeRoot.()
Normally with the latest version it should be fixed. Didn't play for a while on my priest, and yesterday I leveled him till 90. I saw the same thing as your remarks and it was very annoying If the target is not in ligne of sight, he try to move in line of sight. Handy if you quest, not handy in raids ^^. I also put a check if you disable movement he don't try anymore to get in line of sight in latest version.
"how do i attach this CR to my bot?" Download it from the first page and extract the zip file into your "Routines" folder. If you keep singular in the routines file then when you start up honor buddy it will ask you which routine you want to use. Just select this one.
First of all, i love your CR! But it just updated and it says: Compiler Error: c:\Users\xxx\Desktop\HB\Routines\Spriest\Form1.cs(24,13) : error CS0103: The name 'checkBoxVoidWithPsyScream' does not exist in the current context Compiler Error: c:\Users\xxx\Desktop\HB\Routines\Spriest\Form1.cs(161,61) : error CS0103: The name 'checkBoxVoidWithPsyScream' does not exist in the current context any fix for this?
I remove it because no longer of use. But strange you get that error, I use it for the moment and everything is working fine. Did some changes to the GUI to allow to make better choices. Maybe you update between 2 revisons upload. Revision now = 63. Open your revision.xml file and look at the number. If it says 63, change it in 62 and start again.
Halo and some other spells still use movement like posted above causing minor issue. I also find the bug with Void Tendrils and Scream being case in the reverse order.
