HB ARCHIVES: Kick's Old Posts Thread--DO NOT DELETE!

Having a hard time with transition from Alliance 1-12 panda to eastern kingdom 12-58 Westfall quests.

I've brought 2 toons through now, and they have difficulties getting to the quest Murder Was The Case That They Gave Me - Quest - World of Warcraft.

Briefly - issues with going through Stormwind to set hearth location, then to flightmaster. Once flight to Goldshire toons just sit. Start stop doesn't seem to help. Cache clearing doesn't seem to help. Got some "Moving to Type: Fly, R: Update" errors on my laptop machine last night as well (I know these aren't profile issues, just mentioning it in case it helps).

Manually moving the toon through Goldshire into Westfall seems to get it to carry on. It's almost as if Storwind and Goldshire are super difficult for the bot right now.

Thanks for any help!


View attachment 1580 2013-03-19 13.33.txt

 

Same problem except this just came out of the blue - was using kicks start to finish so I sense this could be game related since my last toon had no problems and since 5.2 is here, HB can have a problem or two...

 

Still having this issue even after deleting everything in the SVN and updating it.

 

Hi, Danyo, and thanks for the log!

From the log we see this...

[16:02:33.892 D] System.AccessViolationException: Could not read bytes from 020D0F26 [299]!
at Styx.MemoryManagement.ExternalProcessReader.ReadBytes(IntPtr address, Int32 count, Boolean isRelative)
at Styx.MemoryManagement.ExternalProcessReader.Read[T](IntPtr address, Boolean isRelative)
at Styx.StyxWoW.get_IsInGame()
at Styx.CommonBot.TreeRoot.()
at Styx.CommonBot.TreeRoot.()
...<continues indefinitely>...​

95% of the log is filled with this message.

In short, your issues is not profile related. Instead, there is something wrong with your Honorbuddy installation or use. Please follow up to the Support forum with your problem description and log, and they can help you sort it out.

cheers,
chinajade

 

Hi, Muskyguy20,

You need to update Kick's profiles to the latest copy (v2185, as of this writing). Then, you need to update your Quest Behaviors with the ones Kick provides.

You should be off-and-away after that.

cheers,
chinajade

 

Hi, Xlegendx, and thanks for the log!

Try disabling all your plugins, and see if that repairs the problem.

cheers,
chinajade

 

Hi, Chillflo,

SQLLite errors are usually caused by a bad Honorbuddy installation. You may need to do a clean install (rather than 'upgrading') to clear the problem.

You problem is not profile-related. So, if a clean install does not work for you, please follow up to the Support forum. Over there, you must attach your full log with your problem description.

Ref: [Guide] How to attach your log​

cheers & good luck,
chinajade

 

Hi again, Danyo,

This log has a different failure mode than the last one you showed us. From the log, we see this...

[20:17:27.735 D] Could not generate path from {1913.707, -4667.098, 34.54186} to {2822.696, 6171.691, 121.9802} (time used: 3 milliseconds) @ FindEndPoly
[20:17:27.884 N] Moving to Type: QuestPickUp
[20:17:27.980 D] Could not generate path from {1913.707, -4667.098, 34.54186} to {2822.696, 6171.691, 121.9802} (time used: 0 milliseconds) @ FindEndPoly
[20:17:28.188 N] Moving to Type: QuestPickUp
[20:17:28.276 D] Could not generate path from {1913.707, -4667.098, 34.54186} to {2822.696, 6171.691, 121.9802} (time used: 0 milliseconds) @ FindEndPoly​

Your remedy is here: HelpDesk: Toon is not moving

cheers,
chinajade

 

Hi, Neal121,

The remedy for you is the same as for Muskyguy20.

cheers,
chinajade

 

Hi, Muskyguy20,

Either you failed to do it correctly, or the failure mode of the problem has changed. Either way, you must attach a full log that demonstrates the problem for us to help you.

Ref: [Guide] How to attach your log​

cheers,
chinajade

 

No idea what im doing wrong, i havnt changed anything. but my char wont DO ANTHING

 

Hi, 1ready, and thanks for the log!

From the log, we see this...

[04:01:01.468 D] Activity: Downloading Mesh...
[04:01:05.718 D] Downloaded Northrend_37_23
[04:01:05.721 D] Activity: Loading Tile/s
[04:01:05.721 D] Loading Northrend_37_23
[04:01:06.047 D] Activity: Downloading Mesh...
...<continues>...​

After a new install of Honorbuddy, or after HBdev updates meshes, you will get this from time to time.

You just need to be patient, and let Honorbuddy download the meshes it needs to do its job. When it has enough, it will go to work.

cheers,
chinajade

 

Hi, Tumbum, and thanks for the wonderful write-up!

InteractWith has loooong been glitchy when it tries to interact and has to do combat in-between. I've captured the issue (along with your post) to the TODO list. I'll need to discuss with Kick as to how we should go about addressing this: major surgery, or complete rewrite with V2.

cheers,
chinajade

 

Sits here and does nothing. Updated latest profiles revision 2184 ^.

Haven't been able to use the profiles past five, it went to org to set hearth and then broke. Manually tried doing some to ease it along to no avail.


edit; Even disabling "Use Flight Paths" doesn't resolve.
edit2; Really wanted to do some leveling so peered into the profile, in the xml came across this string;

<CustomBehavior File="UserSettings" LootMobs="True" UseFlightPaths="False" PullDistance="25" />

It was set to true, setting to false doesn't rectify the problem.

Currently level 7 in durotar - loading kicks profile for durotar 5-12 just produces this;

 

Hi, BDBKush,

We are unable to help you with problems like this, unless you attach the full log that demonstrates the problem.

Ref: [Guide] How to attach your log​

cheers,
chinajade

 

bot getting stuck in thrallmar in hellfire peninsula trying to get a quest from Megzeg Nukklebust...

 

Hi, Raimajo, and thanks for the log!

From the log, we see this...

[05:10:09.910 D] Changed POI to:Type: QuestPickUp
[05:10:10.197 D] InteractDebug:450982572
[05:10:10.230 D] Interact Done:450982572
[05:10:13.836 D] Cleared POI - Reason Quest Completed
[05:10:13.836 D] Cleared POI
[05:10:13.972 D] Changed POI to:Type: QuestPickUp
[05:10:14.259 D] InteractDebug:450982572
[05:10:14.293 D] Interact Done:450982572
[05:10:17.780 D] Cleared POI - Reason Quest Completed
[05:10:17.780 D] Cleared POI
[05:10:18.013 D] Changed POI to:Type: QuestPickUp
...<repeats indefinitely>...​

Your remedy awaits you: HelpDesk: Cache corruption problems

cheers,
chinajade

 

Perfect. Cleared all three cache and it runs perfect. Thank you for the good service.

 

added to todo list

 

The "Azenius" Plugin still needed for your Quest Profile? I think you swithed to use single QBs for the Quests. Because i saw this Plugin in the latest HB Release and Beta ZIP Folder.