HB ARCHIVES: Honorbuddy Profile Pack--DO NOT DELETE!

Hi, Eneskar20,

When asking for help, you simply must attach a log. Crashes can happen for many reasons.

Ref: [Guide] How to attach your log​

I'll take one guess—you need to upgrade to Honorbuddy v2.5.8179.697. If that's not the issue, we'll need to see the full log attached, please.

cheers,
chinajade

 

Hi, Kiyumi,

From your log:

[12:55:52.933 D] Activity: Moving towards Blisterpaw Hyena
[12:56:17.614 D] We died, Clearing current POI​

This is not a profile issue, and you'll need to let the Support forum to help you resolve your issue.

cheers,
chinajade

 

Hi, Shadowflame,

Compile issues are not profile-related as described in the guide for Reporting Problems or Seeking Assistance.

You need to do a 'clean install' to resolve your issue. Instructions here:

HelpDesk: "Clean installing" Honorbuddy​

If you continue to suffer problems, we must have your full log attached.

Ref: [Guide] How to attach your log​

cheers,
chinajade

 

The quest pack is a fresh install and checked for updates before I use it every time so it much be avoidance then as it tries to kill them instead of walking upto the quest item.

 

I've done everything that you posted in this post and it is still standing at Warden Bullrok. What next? This is frustrating.

 

Problems with deepholm quest Maziel's Ascendancy. Profile put its nose down in water and are supposed to go into the cave nearby. Log attached. Else thank's for a mostly flawless profile pack, just wish it was 100% afk'able, but aint a big deal.

 

Hi, Chestnut817,

If you need assistance, please follow the Guide for Reporting Problems or Seeking Assistance. Specifically, we simply must have the full lo gfile attached that captures the problem.

cheers,
chinajade

 

Hi again, 99-LS1-SS, and thanks for the log.

[00:29:20.285 D] Changed POI to: Type: QuestPickUp
[00:29:21.020 N] Moving to Type: QuestPickUp
[00:29:24.868 D] InteractDebug:677185320
[00:29:24.903 D] Interact Done:677185320
[00:29:28.015 D] InteractDebug:677185320
[00:29:28.056 D] Interact Done:677185320
[00:29:31.026 D] InteractDebug:677185320
[00:29:31.065 D] Interact Done:677185320​

Is a quest even being offerred by the NPC? If not, you may be bumping into an issue where the checkpoints have skipped over content critical for opening the chain. You might try editing IgnoreCheckpoints="true" in the profile, and see if that will get you going again. Ignoring checkpoints may cause you to go back to previous zones and revisit content you didn't complete. You can find more information here:

HelpDesk: Questing profiles and the Loremaster achievement​

If that doesn't solve your issue, you're going to need to make a thread in the Support forum regarding this issue. Honorbuddy is unable to carry out the profile directives for some reason.

cheers,
chinajade


[size=-2]Ref: 99-LS1-SS's original post w/log[/size]

 

Hi, Azidtrip, and thanks for the log.

Indeedy, we're still working on the AFK-ability among other ssues.

[00:34:50.632 N] Mounting: swift purple gryphon
[00:34:52.385 D] Flushing timed movement. Direction: AllAllowed
[00:34:52.537 N] Moving to Type: Hotspot, Loc: <691, -664, 5.997942>
[00:34:55.471 N] We are stuck!!
[00:34:55.505 N] Moving to Type: Hotspot, Loc: <691, -664, 5.997942>
[00:34:55.506 D] Could not generate full path from {795.6109, -559.8567, 151.111} to {691, -664, 5.997942} (time used: 1 milliseconds)​

This is a navigational issue. We'll have to see if its something that can be worked around next time we get toons through Deepholm.

As a work around, you can try placing your toon on the ground and dismount, to see if Honorbuddy can calculate a path from that state.

cheers,
chinajade


[size=-2]Ref: Azidtrip's original post w/log[/size]

 

I tried what you suggested already, but no luck. Ain't any worse than I can manually quest a little. Thank's, I keep my eyes up for changes so I know if I can afk it sometime later. ^_^

 

Wont work.
Tried stormwind and also in jade forest...in jade it tells me to go to Stormwind and press Start lol wtf.

Alliance obviously.
I finished the SI:7 quest where you go to the airship and then to pandaria and you shoot with the airplane and then land on the ground via parachute.
Nothing else, this profile will not work.


And dont tell me this "make a new Hb installation from scratch and make sure your profiles and stuff are updated "
Its a fresh install, havent had HB on this machine before.

If I land in Stormwind all it does is mount up on a random ground mount and stand there.

Hmm, now its working but for some reason it will not autoface targets

 

Hi, Jamesmay,

No chance of helping you with your problem if you don't attach a full log that captures it. Please see the guide for Reporting Problems or Seeking Assistance.

Honorbuddy doesn't do inter-continental travel by itself, and the profile only scripts inter-continental travel at specific points. It sounds like you did some quests manually before starting the profile. Your actions botched the quest state the profile was designed to work with. You will need to figure out what else you need to do manually to have it be happy with a manual move to Jade Forest.

The one thing we can say...
the snippet you show us has absolutely nothing to do with your problem. As the warning clearly says the quest behavior "will continue to function as originally designed."



cheers,
chinajade

 

Having problems with Horde 12-58 in Tanaris. Second quest in a row I've had this problem where the bot runs to the spawn and just spams - InteractWith-v719(info)] Going after 'alive' Blisterpaw Hyena to make it 'dead' - while standing still.

On quest Blisterpaw Butchery

Have clean installed twice

 

I've added 3 hotspots for Maliciously Delicious, 52lvl quest in Swamp of Sorrows

The hotspots are:
<Hotspot X="-9665.648" Y="-4018.523" Z="-1.936621" />
<Hotspot X="-9708.344" Y="-4069.131" Z="-1.829561" />
<Hotspot X="-9768.495" Y="-4115.245" Z="-1.89157" />

They are a little bid in the water. There are some craps that you gotta kill it takes the bot half an hour to complete the quest because he doesn't have hotspots in the water.

The original code is:

Code:

	<Quest Id="27587" Name="Maliciously Delicious">
		<Objective Type="CollectItem" ItemId="61633" CollectCount="6">
			<Hotspots>
				<Hotspot X="-9654.944" Y="-3965.57" Z="-1.50719" />
				<Hotspot X="-9655.963" Y="-3894.866" Z="-1.435763" />
				<Hotspot X="-9608.617" Y="-3876.897" Z="-1.435778" />
				<Hotspot X="-9561.566" Y="-3884.521" Z="5.944796" />
				<Hotspot X="-9526.86" Y="-3913.968" Z="3.039859" />
				<Hotspot X="-9566.1" Y="-3978.302" Z="-1.50719" />
				<Hotspot X="-9587.729" Y="-4018.367" Z="-1.50719" />
				<Hotspot X="-9631.615" Y="-3994.092" Z="-1.50719" />
				<Hotspot X="-9716.596" Y="-4018.822" Z="2.660796" />
				<Hotspot X="-9738.877" Y="-4014.579" Z="12.0223" />
				<Hotspot X="-9743.393" Y="-4045.181" Z="1.359833" />
				<Hotspot X="-9771.055" Y="-4068.85" Z="3.101942" />
				<Hotspot X="-9826.609" Y="-4129.917" Z="2.162194" />
				<Hotspot X="-9846.311" Y="-4145.595" Z="2.599491" />
			</Hotspots>
		</Objective>
	</Quest>

Has to be changed to:

Code:

	<Quest Id="27587" Name="Maliciously Delicious">
		<Objective Type="CollectItem" ItemId="61633" CollectCount="6">
			<Hotspots>
				<Hotspot X="-9654.944" Y="-3965.57" Z="-1.50719" />
				<Hotspot X="-9655.963" Y="-3894.866" Z="-1.435763" />
				<Hotspot X="-9608.617" Y="-3876.897" Z="-1.435778" />
				<Hotspot X="-9561.566" Y="-3884.521" Z="5.944796" />
				<Hotspot X="-9526.86" Y="-3913.968" Z="3.039859" />
				<Hotspot X="-9566.1" Y="-3978.302" Z="-1.50719" />
				<Hotspot X="-9587.729" Y="-4018.367" Z="-1.50719" />
				<Hotspot X="-9631.615" Y="-3994.092" Z="-1.50719" />
				<Hotspot X="-9716.596" Y="-4018.822" Z="2.660796" />
				<Hotspot X="-9738.877" Y="-4014.579" Z="12.0223" />
				<Hotspot X="-9743.393" Y="-4045.181" Z="1.359833" />
				<Hotspot X="-9771.055" Y="-4068.85" Z="3.101942" />
				<Hotspot X="-9826.609" Y="-4129.917" Z="2.162194" />
				<Hotspot X="-9846.311" Y="-4145.595" Z="2.599491" />
				<Hotspot X="-9665.648" Y="-4018.523" Z="-1.936621" />
				<Hotspot X="-9708.344" Y="-4069.131" Z="-1.829561" />
				<Hotspot X="-9768.495" Y="-4115.245" Z="-1.89157" />
			</Hotspots>
		</Objective>
	</Quest>

The additional hotspots wont get you drawned but will cut the time to complete the quest 10 times.

 

Recently ive been having some problems with the bot, i log in, all is fine, it complies quests etc, then at the end it goes :

[singular] attention: pull distance set to 0 by questing, profile plug in or user. it then just stands still and does nothing.

i have pull distance set to 40 and checked all the plug ins (none of them even deal with this) :s

 

Problem

Hey there, I am experiencing a problem with the profile for 80-82 in Hyjal. Whenever I start the questing bot, it will compile the questhubs, but go past the one I am currently at. That is, the bot did the first 2 questhubs, then it compiled the rest and skips to the next profile "Deepholm 82-84". It moves to where the quest should be done, but it just stands there, then compiles the rest of the questhubs and stops the bot with the error "This profile does not contain any profiles fitting the character! Bot Stopped! Reason: This profile does not contain any profiles fitting the character!".

I have attached a log, I hope it is not a mistake I have made, as I have had no problems with the profiles so far.

Btw. it is a Orc DK level 81 that is the character in question

 

Hi, Jleeh, and many thanks for the log!

[11:46:00.008 D] Behavior flags changed! All -> 97
[11:46:00.045 D] [RocketRescue_24910-v574(debug)] RocketRescue_24910 behavior complete. ​

You're suffering from a bug in (one of several) quest behaviors that should be repaired in the next release. There is no work around other than to comment out the offending behaviors in the profile. For you, the behavior is "RocketRescue".

To effect the work around, comment out the offending behavior in the profile like this:

<!-- <CustomBehavior File="SpecificQuests\24910-Tanaris-RocketRescue" /> -->​

You will want to un-do this after the next Honorbuddy drop that repairs the behavior issues.

cheers,
chinajade


[size=-2]Ref: Jleeh's original post w/log[/size]

 

Hi, Tweety, and THANK you so much for this!

We've folded your changes into v2789.

Generally, we avoid water because Honorbuddy is unable to path back to corpses that die in water. However, since you indicated the water was shallow here, and have obviously tested it well, we went with your recommendation.

cheers & thanks so much again!
chinajade


[size=-2]Ref: Tweety's reported problem and recommended repair[/size]

 

Hi, Cartzy77,

We are simply unable to assist you with problems like this if you don't attach your full log that captures the issue. Please see the guide for Reporting Problems or Seeking Assistance.

cheers,
chinajade

 

Hi, Legion, and many thanks for the log!

You are suffering from classic cache corruption. You can find the instructions for clearing the problem here:

HelpDesk: Cache corruption problems​

cheers,
chinajade


[size=-2]Ref: Legion's original post w/log[/size]