while im using GB my flying mount will fly for 5 sec and then and stays for a second.

like i say in my title it flys and then its still this is going on and on..
maybe because i bought the 310% mount speed..

thanks in advice

 

i enabled click to move.. but tbh i think because im flying this route with 310% mount and 15 % mount speed buff from DKs im flying faster then the route is recorded.. must be that else i dont know
but this really looks a bit suspicious how i fly.

 

Try with a slower mount to see if the mount is the issue.

 

you cant go slower in 4.0.1, all mounts travel at the max speed you have learned.

 

Oh. Defiantly didn't know that my bad

 

Tony, its because the profiles are recorded on a MS per second and with a too fast mount you get closer and closer to that point meaning GB will wait untill it has to load next point.

this happend too before, when i've done a ground mound profile and the paladin mount was faster so it stopped every now and then.

So to Topic Starter, increase the delays between points and it should work properly again.

 

Load them in editpatrol. There is an option in there to change all points to a certain range between them (it removes some of them if you raise the number).

Cant remember the option name though.

 

ive downloaded editpatrol buts a programm from 2007 and not working properly

 

Im guessing you have the new 310% flying mount? I was reading another thread which states that most of the profiles are outdated which means that the profiles are set up on the old flying mount where the speed was slightly slower. I think profiles should be updated shortly to reflect the changes and fix this. I maybe a retard though as i dont have GB and dont understand how it works!

 

i had these issue too,the bot will run smooth in the first round,came to second round,it will start pausing at every waypoints

 

re-do them with a 310 mount + paladin aura (20%) = 330% -- or a hack (wowinfinity) that lets you go higher than 350% (for safe measures)

 

Paladin aura dont just add 20% to speed, it multiplies it: (100%walking+310%mount)*(1+20%) = 492% (+392% as it would appear ingame) flying speed, can easily check with carbonite

And back to the topic, sometimes the problem with stopping at waypoints happens for me, but its quickly fixing itself, goes smoother and smoother and after like 10 min dont stop at all.

 

please provide the correct** math

http://www.threadmeters.com/sR1obu/New_Flying_only_789_increase/

check that

 

Then you found an old version. I think the latest is 5.4 and it works fine with GB profiles.
I know there was a post on it on these forums a month ago or so.

 

No no no, this issue has something to do with the profile and not the mount speed, I have tested it with 280% and it still skips the majority.
Also I have tried my 310% in sholazar and it works fine there.

 

well im keep trying.. it still stops every few sec with flying and this way its so obvious i use a bot so i wont risk it.
thanks for the help and if someone have an idea please let me know.