the issue i'm having comes with the targeting i assume? when i load the profile it just continues to head towards the quest and it doesn't navigate it will just continue to get hung up? any suggestions much appreciated thanks guys, well in advanced [Ref: "[A - Quest] EK 12-58 [Kick] ($Rev: 2987 $)" @line 6449] [01:43:03.531 D] Goal: CollectThings: 0/6 Bloodsail Cannonball [01:43:03.569 D] Activity: No targets--moving to <-15062.6, 203.1383, -35.76586> [01:43:03.599 D] Activity: Loading Tiles [01:43:03.599 D] Loading Azeroth_31_48 [01:43:03.789 D] Loading Azeroth_31_59 [01:43:03.922 D] Could not generate path from {-8867.221, 672.7221, 97.90312} to {-15062.6, 203.1383, -35.76586} (time used: 0 milliseconds) @ FindEndPoly [01:43:04.048 D] Activity: No targets--moving to <-15062.6, 203.1383, -35.76586> [01:43:04.051 D] Could not generate path from {-8867.82, 672.9789, 97.90312} to {-15062.6, 203.1383, -35.76586} (time used: 0 milliseconds) @ FindEndPoly [01:43:04.175 D] Could not generate path from {-8868.645, 672.9164, 97.90312} to {-15062.6, 203.1383, -35.76586} (time used: 0 milliseconds) @ FindEndPoly [01:43:04.290 D] Could not generate path from {-8869.454, 672.855, 97.90312} to {-15062.6, 203.1383, -35.76586} (time used: 0 milliseconds) @ FindEndPoly [01:43:04.403 D] Could not generate path from {-8870.056, 672.9361, 97.90312} to {-15062.6, 203.1383, -35.76586} (time used: 0 milliseconds) @ FindEndPoly [01:43:04.550 D] Could not generate path from {-8870.356, 673.3737, 97.90312} to {-15062.6, 203.1383, -35.76586} (time used: 0 milliseconds) @ FindEndPoly [01:43:04.672 D] Could not generate path from {-8870.59, 673.5256, 97.90312} to {-15062.6, 203.1383, -35.76586} (time used: 0 milliseconds) @ FindEndPoly [01:43:05.784 D] Could not generate path from {-8870.591, 673.5247, 97.90312} to {-15062.6, 203.1383, -35.76586} (time used: 0 milliseconds) @ FindEndPoly [01:43:05.987 N] Stopping the bot!
Does anybody have problem with Full bags My Bot stops at the seller and it says full bagssomebody has solved this problem ?
Grind profiles do not support the use of the commands needed for Tundra Mammoth. Your best bet would be to find a plugin.. If you cant find one you can pm me and I'll make it for you.
Ok. I am just returning to honorbuddy after two years, so I am re learning everything, so please bear with me. I downloaded the profile, and it is amazing, but both my druid and rogue are having problems with pulling distance. There pull distance is set to 100. how do I change this?
[A - Quest] EK 12-58 [Kick] profile. In Redridge about 28.41 when exiting the room in the house with Magistrate Solomon characters entangled in the doorway. gnome rogue. Sorry, google translate)
Valley of four Winds Quest: The Savior of Stoneplow WL-Demo Toon is in the "Vehicle" to kill the Ik`thik Colossus but Singula always try to [16:01:23.188 N] (Singular) Casting Health Funnel on Pet @ 18.6% [16:01:23.190 N] [Singular] Casting Health Funnel on Meet.9ECA @ 18.6% at 0.0 yds [16:01:23.827 N] (Singular) StopMoving: character already stopped, clearing stop Now request Heal my Pet?! So its impossible to finished this Quest as Pet Class.
In the Horde BC profile I have the following error/bug: It checks for the quest-starter item Drain Schematics and then does it, when you have it, but if you don't have it, it still wants to do the other 2 quests in the chain, "Warning the Cenarion Circle" and "Return to the Marsh" Since the dropchance for the quest-starter item is approx 10% I think it should be good if it checks for quest completion of "Drain Schematics" first
My toon kept flying between thrallmar and the blavk portal for half an hour before i realized what was going on. I found the following block in BC 58-70, lines 1644-1655. They don't make much sense to me, since the ifs and the while condition all check for the same value. <While Condition="Me.MapId == 0" > <If Condition="Me.MapId == 0" > <MoveTo X="-11895.44" Y="-3206.936" Z="-14.64132" /> <CustomBehavior File="WaitTimer" WaitTime="1000" /> </If> <If Condition="Me.MapId == 0" > <CustomBehavior File="MyCTM" X="-11908.09" Y="-3208.854" Z="-14.83002" /> <CustomBehavior File="WaitTimer" WaitTime="1000" /> </If> <If Condition="Me.MapId == 0" > <CustomBehavior File="WaitTimer" WaitTime="15000" /> </If> </While> But the real problem are those lines: <If Condition="HasQuest(10289)" > <MoveTo X="-176.4199" Y="1028.531" Z="54.17289" /> <CustomBehavior File="ForcedDismount" /> <CustomBehavior File="InteractWith" MobId="18930" InteractByGossipOptions="1" X="-176.4199" Y="1028.531" Z="54.17289" /> </If> Normally, the the toon gets the quest, Journey to Thrallmar, talks to the npc, and goes to Thrallmar. But I stopped HB in Thrallmar to change the hearth location. So the next time, when HB checked for the different conditions, it found <If Condition="HasQuest(10289)" > to be true, so it went back to The Black Portal. And since all the other conditions never got to be true, ik just kept flying back and forth. All This because <If Condition="HasQuest(10289) && IsQuestCompleted(10289)" > <TurnIn QuestName="Journey to Thrallmar" QuestId="10289" TurnInName="General Krakork" TurnInId="19255" /> <CustomBehavior File="DeleteItems" Ids="10593, 11184, 11185, 11186, 11188, 11315, 12435, 20404, 12820, 13158, 13159, 16790, 52074, 62916" /> <CustomBehavior File="ForceSetVendor" DoSell="True" DoRepair="True" DoMail="True" /> </If> The condition in line 1686 should be the opposite: <If Condition="HasQuest(10289) && !IsQuestCompleted(10289)" >
Profile : Horde WotLK 68-80 Questing profile Honorbuddy Goal : "Goal: Picking Up Quest - R?cht diese Gr?ueltat! : QuestID - 12006 : To - Ethenial Moonshadow : ID - 26501" (Quest Name is in german due to me having german client) Problem : Bot tries to attack Ethenial Moonshadow instead of interacting and accepting the quest. Edit : Bot had to accept/turn in a quest. I stopped the bot and did it manually, bot continued working properly until it faced Ethenial Moonshadow again. It tried to attack him with Hemmorhage.
The quest was commented for several reasons: Your quest helper, Nass, tends to die easily when doing this quest. When he does, we have to go back to the quest-giver and get him again. If you kill more-than-one mob at a time, Nass gets confused So, we have to keep things very serialized, which is against Honorbuddy's nature when working in tandem with an NPC. If Honorbuddy loots the corpse before Nass has interacted with it, then things go sideways Again, this is against Honorbuddy's nature, and we have to prevent Honorbuddy from looting until Nass has done his thing. Due to all the problems associated with this quest, we just commented it out for now. It will take a somewhat complex custom quest behavior to solve this problem competently. The commenting out of this quest should not be interfering with your ability to progress. From your log, we see this: [00:38:46.175 N] Moving to Type: QuestPickUp [00:38:47.592 D] InteractDebug:512252960 [00:38:47.606 D] Interact Done:512252960 [00:38:50.282 D] InteractDebug:512252960 [00:38:50.294 D] Interact Done:512252960 This looks like classic cache corruption, and perhaps you missed clearing one of the caches correctly? The full procedure for succeeding at cache cleaning is outlined in this article: HelpDesk: Cache corruption problems The answer to this question is provided by this article: HelpDesk: Quests are 'green' or 'gray' cheers, chinajade [size=-2]Ref: Aussieboy1011's original post w/log[/size]
Hi, Jack2727, and thanks for the log. It looks like you were not moving because you were downloading 'tiles'... [03:03:59.783 D] Activity: Downloading Mesh... [03:04:05.119 D] Downloaded C:\Users\Backup\AppData\Local\HonorbuddyMeshes\Azeroth\Azeroth_42_29 [03:04:05.126 D] Activity: Loading Tiles [03:04:05.126 D] Loading Azeroth_42_29 [03:04:05.352 D] Activity: Downloading Mesh... [03:04:09.014 D] Downloaded C:\Users\Backup\AppData\Local\HonorbuddyMeshes\Azeroth\Azeroth_34_43 [03:04:09.019 D] Activity: Loading Tiles [03:04:09.019 D] Loading Azeroth_34_43 [03:04:09.111 D] Activity: Downloading Mesh... [03:04:11.151 D] Downloaded C:\Users\Backup\AppData\Local\HonorbuddyMeshes\Azeroth\Azeroth_30_25 [03:04:11.155 D] Activity: Loading Tiles [03:04:11.155 D] Loading Azeroth_30_25 [03:04:11.167 D] Activity: Downloading Mesh... [03:04:15.933 D] Downloaded C:\Users\Backup\AppData\Local\HonorbuddyMeshes\Azeroth\Azeroth_33_42 [03:04:15.938 D] Activity: Loading Tiles [03:04:15.939 D] Loading Azeroth_33_42 [03:04:16.086 D] Activity: Downloading Mesh... [03:04:17.239 D] Downloaded C:\Users\Backup\AppData\Local\HonorbuddyMeshes\Azeroth\Azeroth_32_37 [03:04:17.244 D] Activity: Loading Tiles [03:04:17.244 D] Loading Azeroth_32_37 [03:04:17.251 D] Activity: Downloading Mesh... [03:04:19.090 D] Downloaded C:\Users\Backup\AppData\Local\HonorbuddyMeshes\Azeroth\Azeroth_29_37 [03:04:19.095 D] Activity: Loading Tiles [03:04:19.095 D] Loading Azeroth_29_37 [03:04:19.110 D] Activity: Downloading Mesh... Just let the process complete, and you should be good. This make take a while, as to go train riding for some factions requires a few minutes sometimes, since very very large distances can be involved. cheers, chinajade [size=-2]Ref: Jack2727's original post w/log[/size]
Hi, Omorashi, and thanks for the report and log. It looks like the problem may be a bad quest override. We've captured the issue to Known Bugs List: Classic 1-58 for now, and will have to examine the problem the next time we get a toon through the area. [UPDATE 30-Dec-2013 03:11 UTC by chinajade]: Thanks to MaxMuster, this problem has been repaired in v2997. cheers, chinajade [size=-2]Ref: Omarashi's original post w/log[/size]
Hi, Odium, and thanks for the log. [05:36:01.774 D] Exception was thrown in BotBase.Start. Bot cannot start. [05:36:01.774 D] System.NullReferenceException: Object reference not set to an instance of an object. at Bots.Quest.QuestBot.Start() at Styx.CommonBot.TreeRoot.() [05:36:04.316 N] Starting the bot! [05:36:04.316 N] Currently Using BotBase : Questing [05:36:04.316 D] Character is a level 82 Goblin DeathKnight [05:36:04.316 D] Current zone is Orgrimmar [05:36:04.317 D] Exception was thrown in BotBase.Start. Bot cannot start. [05:36:04.317 D] System.NullReferenceException: Object reference not set to an instance of an object. at Bots.Quest.QuestBot.Start() at Styx.CommonBot.TreeRoot.() [05:36:05.774 N] Starting the bot! [05:36:05.774 N] Currently Using BotBase : Questing [05:36:05.774 D] Character is a level 82 Goblin DeathKnight [05:36:05.774 D] Current zone is Orgrimmar [05:36:05.774 D] Exception was thrown in BotBase.Start. Bot cannot start. [05:36:05.774 D] System.NullReferenceException: Object reference not set to an instance of an object. at Bots.Quest.QuestBot.Start() at Styx.CommonBot.TreeRoot.() It looks like there is a problem with your Honorbuddy installation, and it is not even finishing its initialization process. You have also installed Kick's profiles inside your Honorbuddy directory tree, and this is a no-no: [05:34:23.267 N] Compiler Error: c:\Users\*****\Documents\HonorBuddy\Plugins\Kick's Profiles\Kick's Profiles\Useful Stuff\Non Questing Plugins\Pbuddy\Pbuddy.cs(15,15) : error CS0101: The namespace 'DHXPickBuddy' already contains a definition for 'DHXPickBuddyNM' Installing non-plugin things in the Plugins directory (or other inappropriate Honorbuddy directories), confuses Honorbuddy to no end. Please see the red text in this article to get Kick's profiles installed someplace appropriate: Obtaining a Copy of the Profiles At this point, I'd do a 'clean install'. You can find the instructions here: HelpDesk: "Clean installing" Honorbuddy cheers, chinajade [size=-2]Ref: Odium's original post w/log[/size]
Hi, Efullenkamp94@msn.com, Thank you for this information, but without a log, we cannot take corrective actions. We'll try to keep an eye out for the problem, the next time we're through the area. cheers, chinajade
Hi, Durtyxthurty, and thank you for this. We've captured the issue to the Known Bugs List: Miscellaneous (Rep, Seasonal, etc). cheers, chinajade
Hi, Jkiest9, WoWhead is not reporting this quest (Proving Your Strength - Quest - World of Warcraft) as deprecated. And, without a log, we are unable to take action. MaxMuster is spot on with this. If you are short the experience, that can be caused by cache corruption. If you believe this to be the case, then this article will help you straighten it out: HelpDesk: Cache corruption problems The profile pack provides more than enough experience for you to properly pick up the quests when arriving at the quest giver. The other possibility is you skipped content provided by the profile pack that it wanted to do. If this is the case, you will need to reclaim that missing experience, or your questing will continue to encounter problems such as this. Please see this article for more information: HelpDesk: Quest giver is not offering expected quest cheers, chinajade
Hi, Omorashi, and many thanks for the log. Your log is filled with these exceptions: [09:27:19.155 N] Moving to Type: Hotspot, Loc: <491, -2232, 133.0462> [09:27:19.165 D] Exception thrown in Root.Tick [09:27:19.165 D] System.IndexOutOfRangeException: Index was outside the bounds of the array. at Styx.Pathing.MeshNavigator.(MeshMovePath , Vector3 ) at Styx.Pathing.MeshNavigator.(MeshMovePath , Vector3 ) at Styx.Pathing.MeshNavigator.MoveTo(WoWPoint location) at Styx.Pathing.Navigator.MoveTo(WoWPoint location) at CommonBehaviors.Actions.NavigationAction.Run(Object context) at CommonBehaviors.Actions.ActionMoveToPoi.Run(Object context) Honorbuddy is unable to perform even basic activities. This is an issue for the Support forum. But, before going there, I'd try a 'clean install' first--instructions here: HelpDesk: "Clean installing" Honorbuddy cheer, chinajade [size=-2]Ref: Omarshi's original post w/log[/size]