AutoAngler was working excellent up until today. Since the updates, my DK will not jump on top of the water if he ends up below the surface. It jumps repeatedly, but never reaches the top. Eventually it triggers the inactivity timer and logs off. I have tried a fresh install of HB/AA2 and have tried disabling all addons to no avail. I can attach a log if you like, but in all honesty the only part out of whack is this: Changed POI to: Type: Harvest Stop and dismount... Reason: Fishing (Singular) info: 209 seconds since AutoAngler BotBase last called Singular Flushing timed movement. Direction: JumpAscend (Singular) info: 229 seconds since AutoAngler BotBase last called Singular Flushing timed movement. Direction: JumpAscend (Singular) info: 249 seconds since AutoAngler BotBase last called Singular Flushing timed movement. Direction: JumpAscend (Singular) info: 269 seconds since AutoAngler BotBase last called Singular Flushing timed movement. Direction: JumpAscend (Singular) info: 289 seconds since AutoAngler BotBase last called Singular Flushing timed movement. Direction: JumpAscend (Singular) info: 309 seconds since AutoAngler BotBase last called Singular Flushing timed movement. Direction: JumpAscend (Singular) info: 329 seconds since AutoAngler BotBase last called Singular Flushing timed movement. Direction: JumpAscend (Singular) info: 349 seconds since AutoAngler BotBase last called Singular Flushing timed movement. Direction: JumpAscend (Singular) info: 369 seconds since AutoAngler BotBase last called Singular Flushing timed movement. Direction: JumpAscend (Singular) info: 390 seconds since AutoAngler BotBase last called Singular Flushing timed movement. Direction: JumpAscend (Singular) info: 410 seconds since AutoAngler BotBase last called Singular Flushing timed movement. Direction: JumpAscend (Singular) info: 430 seconds since AutoAngler BotBase last called Singular Flushing timed movement. Direction: JumpAscend (Singular) info: 450 seconds since AutoAngler BotBase last called Singular Flushing timed movement. Direction: JumpAscend (Singular) info: 470 seconds since AutoAngler BotBase last called Singular Flushing timed movement. Direction: JumpAscend (Singular) info: 490 seconds since AutoAngler BotBase last called Singular Flushing timed movement. Direction: JumpAscend (Singular) info: 510 seconds since AutoAngler BotBase last called Singular Flushing timed movement. Direction: JumpAscend (Singular) info: 530 seconds since AutoAngler BotBase last called Singular Flushing timed movement. Direction: JumpAscend (Singular) info: 550 seconds since AutoAngler BotBase last called Singular Flushing timed movement. Direction: JumpAscend (Singular) info: 570 seconds since AutoAngler BotBase last called Singular Flushing timed movement. Direction: JumpAscend (Singular) info: 590 seconds since AutoAngler BotBase last called Singular Flushing timed movement. Direction: JumpAscend and continues until the inactivity timer. If I manually press some directional arrows, it will eventually make it to the surface and resume. Maybe the JumpAscend function needs to randomize the jump directions more? Thanks
can u change the jump settings when ur swiming just jumping is not working at 100%, some time i have to jump forward manualy so he can get on the top of the water
Not really sure just the bot base can do that. But I know for a fact that there is a profile that had 1-600 fishing. Sent from my SAMSUNG-SGH-I337 using TheBuddyForum mobile app
As far as those who are mentioning the jumping problems- they're gonna ask.for a full log. But yes, even I get this problem as well. I've resorted to just blacklisting that area. And I'm not even sure it's a pure HB or AA2 problem, since when I'm not running the bot, my water strider mount sometimes has a hard time "grabbing" the water. As well as manually using the raft, it will not catch the water. I think it may be a problem in blizzards end. That being said, the bot jumps straight up and down a lot, which really doesn't do anything. Sent from my SAMSUNG-SGH-I337 using TheBuddyForum mobile app
Hi, Deserter and Dexgad, We've never been able to replicate this problem internally. As stated in the first post and UnicornFart has pointed out, we will need the full log attached, if you would like us to analyze the problem. There might be a common thread for users that experience this problem. But, without logs, we've absolutely no chance of finding it. As a work-around, you can disable "water walking" in AutoAngler2. cheers, chinajade
Hi, Dutamulia, Nae, AutoAngler2 itself does not learn fishing skills for you. However, Professionbuddy profiles can be written to do this when coupled with AutoAngler. And as UnicornFart points out, there are already profiles out there that do this for you. cheers, chinajade
Hey can you update the water walking aura list to include "Blessing of the Inkgill"? The bot is acting goofy in Inkgill Mere. It will walk on water but it wont stop to fish. It will try to find a spot on the shore and if there isnt a pool close to the shore it gets stuck. Thanks.
Hi, Sickjellyfish, We've opened HB-594 ("Support "Blessing of the Inkgill" buff in AutoAngler2?") regarding this issue. cheers, chinajade
Yesterday i installed AA2 and used a BlankProfile inside Wailing Caverns, everything worked fine. Today i tried the same thing. I didn't change any setting and i didn't change anything with my hb, but the bot won't start to fish :-( I cleared the cache, reloaded the profile and updated AA2. It still doesn't work EDIT: Solved problem with a complete new installation of hb, but the error isn't obvious for me ;(
Hi, Menna, and welcome aboard. This is clearly explained in the first posts of this thread. cheers, chinajade
Hello, I have a dwarf shaman and had some problem with water walking. Only jumping to get out the water wasn't enough, the bot was stuck in the water. So in WaterWalking.cs under the Cast function I added WoWMovement.Move(WoWMovement.MovementDirection.Forward); just after WoWMovement.Move(WoWMovement.MovementDirection.JumpAscend);. The char will now move forward after jumping. Maybe it's not the perfect code for every race, but its working great now for my dwarf shaman. Only 5-6 jumps to get out the water instead of 10mins+ stuck. edit: after some tests, it's not the best solution. It still get stuck half the time.
Hi My problem is somewhat curious. Since HB .729, I observed AA2 disabling the Start/Stop button and the Bot Select dropdown after switching the bot bases. I made a fresh install of HB from the ZIP with only AA2, but nothing changed. For example: I play a while with Combat Bot, then stop it and switch to AA2 (stationary with empty profile). After some fishing I stop AA2 with the Stop button and want to switch back to Combat Bot, however the Bot Select dropdown remains disabled (gray). When pressing Start again, even the appearing Stop button becomes disabled (gray). The same occurs, when starting HB with AA2 first an switch to another bot base. Swiching between other bot bases than AA2 works without problems. I have no other choice than to terminate the bot by [X] and start it again. As this only occurs with changing from and to AA2 botbase, I presume there must be something wrong with AA2 (initialize/deinitialize, perhaps?). There is not a single line about that behavior in the logs, really nothing, nada. The last entry is the fish I caught last and that's all. So I forego to post a log here for now. Thanks a lot for any help! [repost into AutoAngler2 thread]
Hi, Corleone, We've opened HB-676 ("Auto Angler2 disabes Start/Stop and bot switching") against this issue. cheers, chinajade
Hi, Pasdoy, To analyze this issue, we're going to need the full log that captures the issue. Please toss us the log the next time it happens. cheers, chinajade
Chinajade - Ive attached a couple of logs as my Troll had a similar issue BEFORE I obtained the Anglers Fishing Raft. In my case HB would stop working; my recollection is this occurred when something interrupted my fishing - combat or something - and I had no WW aura. On a separate note, is there a way to change which fishing pole the bot uses?? I was using Pandaren Fishing Pole, then bought the Dragon Fishing Pole. While I have both in my bags, I put the former in my tackle box, equipped the latter, and stored a non-fishing bag. Occasionally, the bot would seek to equip the pole in my tackle box, and since my wpn couldn't go there, would get caught in a loop. As I typed this I had the WW aura issue; the raft would not engage properly, and HB stopped working. Log attached. I wasn't sure which earlier log had the correct data, but I can provide a cpl if needed. Added second log, as it happened again - HB stopped - while jumping with access to raft. (FYI - I have had problems with the raft without using HB also)
Hi again, Corleone, They development staff has tried very hard, and is unable to reproduce the issue in any form. Is there something else you may be doing to trigger the issue—say entering AutoAngler2 via ProfessionBuddy or something? Could you perhaps do a clean install, and see if the problem persists in that copy? thanks! chinajade [EDITED 30-Apr-2014 by chinajade]: Just an update... HB-676 ("Auto Angler2 disabes Start/Stop and bot switching") has been closed as "unable to reproduce". Since a follow up was not received, the team assumed the problem was resolved by a clean install.
I continue to have problems with AA2 and the Angler Raft / Water Walking. I have attached logs. Repeatedly, whenever the profile attempts to land in water and use the raft, HB stops. Please let me know if I have something configured wrong, if it is a profile issue, or what. Thanks.
