HB ARCHIVES: Honorbuddy Profile Pack--DO NOT DELETE!

I'm not sure if this has anything to do with the profile pack, but it's my best guess and I thought I'd ask here.

Hello, I have been using the questing 1-58 Horde on my first bot character. I turned off the kill between hotspots in the settings and when running from area to area during questing the character still gets off his mount to kill every single mob it ever sees along the way. It's inefficient with a 100% mount, unrealistic increasing chances of being accused of botting, and it just irks me to watch. I hope not to offend. I just noticed it and thought I would post.

Is there any way whether it be in the settings or script to stop it from doing that? Or would it be too big of a rework for me to do personally with little experience in writing?

 

Hello, ever since i updated the profile packs last night, my character just sits there and grinds mobs instead of questing.

 

Horde.
Kick's MoP 85-90 profiles.

how to disable some quests? quests don't work...

we need tree of quests to disable them, cos' some of them bot didnt finish, just became stuck at NPC and didnt nothing. I got msg - Bot stopping! Reason: Could not create current in quest bot!

 

Hello, again!

It took a couple of hours, but I completed a fresh install and update of WoW and HB on a different computer (my notebook), and the problem persists - stuck standing on top of Xiao in Valley of the Four Winds. Is there a way to have HB skip Xiao? Thank you!


L.

 

having an issue with the 1-58 horde questing where my lvl 46 monk mounts goes to flight path then the bot just repeats "Moving to Type: QuestPickUp" over and over. like pages of the same line. do i need to do something or whats wrong that i need to fix.

thanks

 

Guys, my solution is... (sorry for my english)

Exmaple:
I became stuck at NPC-Shademaster Kiryn in Kun-Lai Summit.

1. find NPC in wowhead http://www.wowhead.com/npc=59449
2. NPC has 2 quests: Cho's Missive and Deanimate the Reanimated
3. open XML file (use program - Sublime Text 2 free) and Find the first occurrence of a string Cho's Missive :
<PickUp QuestName="Cho's Missive" QuestId="31460" GiverName="Mishka" GiverId="59451" X="2143.707" Y="1481.136" Z="487.8864" />
just comment:
<!--
<PickUp QuestName="Cho's Missive" QuestId="31460" GiverName="Mishka" GiverId="59451" X="2143.707" Y="1481.136" Z="487.8864" />
-->
4. Open profile in Honorbuddy. Start.
5. if u become still stuck then open the file and Find the second occurrence of a string Cho's Missive.

<PickUp QuestName="Cho's Missive" QuestId="31459" GiverName="Shademaster Kiryn" GiverId="59449" X="2250.321" Y="915.8299" Z="481.1474" />

just comment:
<!--
<PickUp QuestName="Cho's Missive" QuestId="31459" GiverName="Shademaster Kiryn" GiverId="59449" X="2250.321" Y="915.8299" Z="481.1474" />
-->
6. Open profile in Honorbuddy. Start.

e.t.c.

after the second search my bot worked and continued questing.

gl hf

 

Hi guys, I am attempting to run the MOP profiles on a Boosted 90 and am having a few issues. I am at Pang's Stead when I got stuck. Logs attached. The first logs are of me at Pang's Stead. The third is after the profile told me to go to Stormwind and start from there.
View attachment 135839
View attachment 135840
View attachment 135841

 

Hello! I've been using this bot to level up a lot of Alliance characters, and it's working FLAWLESS! (Y) but today, for the first time I'm trying to level a Horde with this. 1-58 was running flawless for me, but now that I'm in Outlands (Hellfire, to be more specific) it was only doing a couple of Quests, but now it's just grinding the Marauding Crust Bursters. Is it supposed to do so?

 

Profile has been working flawlessly. I have leveled 5 horde toons 1-90 with this and its simply amazing. However, yesterday I started an alliance toon and for some reason it seems the profile is a few levels behind as my ingame toons level is ahead of the quests and its only doing green quests. Is there a fix for this or is this a common issue? I can submit a log if need be.

 

I keep getting stuck with my Shaman.. It just makes a big loop - Not attacking anything or if it does its cause it was attacked... Heres the log..

 

Hey guys, been having an issue with the quest "Monitoring the rift: Sundering Chasm" in Northrend. The bot will fly out to where it needs to go, dismount, remount, dive down a bit, go back up and repeat. All the while spamming that it is stuck. Not sure if that is a profile issue or a navigation issue. It does keep spamming this over and over again in the log file.

[13:34:55.543 D] Stop and dismount... Reason: [QB] LandAndDismount
[13:34:55.728 D] Flushing timed movement. Direction: Descend

After a few seconds it changes to spamming this.

[13:35:10.557 D] Failed to properly land and dismount in 15 seconds. Forcing a dismount.
[13:35:10.615 D] Flushing timed movement. Direction: Descend

The time stamps are when it starts and goes on for about 10min until I noticed it. If this is a navigation issue let me know and Ill post it up in that thread. Log file attached.
View attachment 427528 2014-07-17 03.02.txt

 

Hi, KarthusUltiPenta,

We've never had quest issues in Howling Fjord. This sounds like a problem with your Honorbuddy installation. If you need assistance, please see Reporting Problems or Seeking Assistance. In particular, we will need to see your full log before we can analyze an issue, and take corrective actions.

cheers,
chinajade

 

Hi, Toml96, and thanks for the log.

It looks like you were having problems entering the portal for the encounter area. This problem should be repaired in v3386.

It looks like you manually moved your toon through the portal into the cavern. And somehow the battle got started before the 25551-Hyjal-TheFirelord.cs quest behavior got a chance to run. So, the encounter wasn't under control of the profile because of this.

Hopefully, the recent portal fix will clear all this up.

cheers & sorry for the inconvenience,
chinajade


[size=-2]Ref: Toml96's problem report w/log[/size]

 

Hi, Maaxk,

Your profiles must be out of date. We added a blackspot for that 'hole' behind the building a while back.

Please update your copy of the profiles, and if you continue to encounter the problem, show us a full log.

Ref: [Guide] How to attach your log​

cheers,
chinajade

 

Hi, Hackersrage, and sorry you had difficulties.

Stealing the Horde major city's flames:

• Gives you an items you need to complete A Thief's Reward.
• The "Thief's Reward" quest is a requirement for the King of the Fire Festival achievement.
• The "King of the Fire Festival" achievement is a requirement for The Flamekeeper achivement

So yes, those flames from enemy cities are needed to get you the goal we seek in that profile.

The delays are needed due to some connections and servers taking an unreasonable amount of time to 'wink in' the seasonal objects such that you can safely interact with them. We have no control of this, but must accommodate it nevertheless.

I did run these profiles personally this year on 5 alliance toons, and didn't recall any of the problems you describe. We do know the profiles need to be made Honorbuddy stop/start friendly, which they currently are not. Sadly, since the event is over, we've no way to go back and try to replicate the looping you describe. Will have to give it a look again next year, but thanks for the report.

cheers,
chinajade


[size=-2]Ref: Hackersrage's problem report w/log[/size]

 

Hi, SHJordan, and thank you for the log.

As we've stated many times, mailing issues are not a profile problem. The profile is not even running when a vendor run is in progress.

The problem appears to be a bug in Singular, and its already been captured in HB-1007 ("Honorbuddy unexpectedly dismounts in flight"). We've attached your log to the bug report. Hopefully, this will make the problem quicker to find.

cheers,
chinajade


[size=-2]Ref: SHJordan's original post w/log[/size]

 

Open the profile you are currently on and search for questorder and change the value.

 

Hi, Xsolidguardian, and welcome aboard!

It sounds like your caches are corrupt. This article will help you walk through clearing them:

HelpDesk: Cache corruption problems​

If you need further assistance, we must see your full log attached, so we an analyze the problem.

Ref: [Guide] How to attach your log​

cheers,
chinajade

 

Hi, Bearcat,

This information is unactionable, unless you attach the full log that captures the problem. Please see the Reporting Problems or Seeking Assistance.

cheers,
chinajade

 

Hi, xXVik1nGXx, and welcome aboard.

Please see Reporting Problems or Seeking Assistance. Specifically, we will need the full log attached. What you've provided is output from Honorbuddy's scrolly window, and not a log. The scrolly window output does not contain much information we need to see.

cheers,
chinajade