View attachment 1856 2014-10-02 11.56.txt Alright so here's whats happening. Using Pokehbuddy, using built in "Auto Boost pets in slot 1 (aka righter mode) swaps out at 25" It will engage the battle, immediately swap out the slot 1 for the booster, and the low level, slot 1 never gets any exp. What am i doing wrong?
Pokehbuddy is BROKEN Pet Battle Swapper is BROKEN Pet Area is SERIOUSLY BROKEN. Nobody has posted on here in a while with anything effective, so I will. Install Pokehbuddy and Battle Pet Swapper from SVNs Set Pokehbuddy settings to: (1 click settings) Level all pets in current team. (General Settings) 4 levels higher/lower than pet, and unclick both selections in Pet Rotation. (3rd Party Addons) Select both BPS and slot 1. Leave everything else alone. Set BPS settings to: Relative. I have minimum level of 1, maximum of 25, and selecting my rare, favorite pets only. This way, I select my favorites and allow it to level them only. YOU MUST CHANGE Battle Pet Swapper's Plugin.cs settings to " private int _tickCountOfLastPetEquip = Environment.TickCount; " as described by Xeon in BPS plugin post page 14, comment #136 Set honorbuddy to Gatherbuddy 2. Disable gathering ore and herbs. Load a zone profile. Click start. YOU NEED TO SELECT ZONES APPROPRIATE FOR YOUR BATTLE PETS. Once your pets that you are levelling get too high for the zone you're in, physically move your character to a new zone, load the profile, and start again. This system has been working for me without flaw for 24 hours straight.
Hello, How to make the bot launch PVP pet battles while using for example the archeology buddy? If i launch the pvp pet battle from ->plugins->settings->pvp-rating system, it swtchs the profile to combat bot... Thank you
I have found using ringer mode with the plugin "Tramper" from the Buddystore works really well for auto leveling pets.
Not true. Just the maps (profiles) Pet Area uses are outdated. If you change them to profiles from f.e. the petbattleprofiles pack, everything works just fine. (Including the bot moving to a different map, once the pets level cap has been met.)
Lies! Wrong topic, not my product. Lies! So it isnt broken. At most a bit complicated Im still working on my health and it's been quite a battle so far. But its slowly improving. Programming still doesnt come easy due to the meds. But I will try to release an update for 6.02.
That's good news! At least the part about a potential update with 6.02. Hope you get back on your feet soon - take care. (This pet team started only a few hours ago - at lvl1. Thx mate.)
i have leveled at leat 100 pets in the past few weeks with this plugin. First fight for each pet handmade to get all my pets i wanna level to level 5 (they'll survive a round against a 2x pet this way) an than let the bot doing the rest. never had to heal at a stable master using an emerald proto dragon who heals himself. 1 lvl5 - lvl25 pet ~ 1 - 1,5h with helmet. Only problem i had with this plugin. Bot will eventually disable Framelock, so calculationtime for each round rise from 60ms to ~1500 - 2500 ms @ 100fps (depends on the complexity of your fighting logics might even rise much higher) Botbase was GB2 with a small selfmade profile just running between the spawningspots of the pets. Its an awesome Plugin doing his job pretty well.
Hello all!! I am looking for pet logic config files, I looked through about 30 pages here and found one. There has to be more. I kinda get the basics of editing the logic, but there are so many pets. Has someone compiled a master file, or set of files? If so can you/they attach it here. The buddy forum search feature does not work very well.
Hello, Let's see if anyone can assit me as I'm having trouble configuring PokehBuddy. I have the plugin enabled and running pull distance set to 100 and all my bot currently does is fly around in circles. Running this as GB2 and using Guadah (Pet Training Profiles) https://www.thebuddyforum.com/honor...s/76973-pet-battle-pet-training-profiles.html What's the solution to this? My pet is level 1 and I'm running TUANAH Combat Routine (Shaman) I really hope someone can help me debug this issue. Kind regards, Xps88
It's a good question. The short answer is no. The (always) long answer is, possibly. At the moment, the database is able to be edited, which will help you with getting someone else's pet logic by bringing their db over the top of your own. A willing person could also create a spreadsheet version of their database so people could import the logic for each pet by name, and omit their identifiers, a sqlite script could be built to facilitate this, with a cdf format sheet linking the pet number to the logic, then creating the name to the number in a separate table. But it is highly not recommended, and sharing is just as difficult as importing. An incorrect edit to the db would likely crash HB or create an exception crash. /shrug. It is possible, but it would be costly to achieve. It also means trusting that the other person actually used and knew what they were doing when creating the logic. There are often no perfect strategies with loadout or logic. People would disagree. The GUI has some function and placeholders for importing pets from the xml files, but no easy export and import for hundreds of pets. However, and I'd have to check if this is still the case, you would need to merge the logic, and your own pet IDs, to the pet in question using a sqlite database editor, without creating any odd encoding errors. Not difficult for a database query and sort in access or mysql (if you know how to write a sql query), but certainly more advanced and time costly. From memory of a year ago, a quick starter logic was planned to go along with the PB logic editor, but most of the problems came down to the complexity of having ~6 loadout options for each type of pet, and supporting that while levelling /boosting or using PvP settings and team specific logic. I believe it would pre-fill the logic for the pet family if it matched the attacks, and try to make a logic by creating a line for each attack type, all 900 or so attacks used in each loadout. Unfortunately it would still require a test and confirm for every build, and human intervention as well. I.e where you might swap your pet while the enemy is stunned, in levelling, the new pet may end up being the noob/lowbie. Or it might try to stun instead of heal, etc. A more streamlined import/export process may come along, but for now, editing logic once or twice isn't a huge burden once you get used to it. It's a sure fire way to kill 4 hours, as is the auction house, fishing, etc. But unlike the AH or fishing, you only have to get it right the first time.
When flying, you need to set the engage distance to be all the way out to 300. You should also try GB2 on a character with a gathering skill, so they actually try to land every so often and be in range of the ground. This is the downside of PB, it's not a bot, and it's not helping to gather items. It's stopping gathering from working, occasionally so you can battle pets (and be ganked) If framelock is enabled, and it should be for gb2, see if it engages with targets while on a ground mount. you may need to test this with the debug setting on, to see if PB is actually trying to start a battle or its not getting a chance to engage due to settings. If PB works while mounted up, and using the combat bot, everything else should be OK. If it's still an issue, upload a log.
I don't have the helmet yet - but leveling takes me a lot longer. Would you mind sharing the profiles you created? Same problem here, GB/HB will disable framelock at some point - which makes it a pain in the arse to just leave the bot alone for some hours. (I only do that when doing such harmless things as pokemon battles)
I recommend to use HonorBuddys CR instead of TuanAh - else you will lose a lot of pets to TuanAh attacking the pet once it's targetted.
Yep. There's usually no "avoid combat" list for the dll /store versions of most custom routines. Singular has more general support for this, it can avoid forced combat by default, which makes it generally better for questing. Some of this can be tweaked by moving out of melee range for melee, and into melee range for range. There's also a brief window of time in the game with selecting and then auto combat melee when targeting neutral mobs. Depends on the selection methods used I believe.
When the Bot is running again, i'll make a shot tut and add my profile and the logics i've used (u'll only need a few logics at all) But i've altered the configform.cs I wanna share it with u. But don't expect something fancy, the profile I used is just a GB2 profile running between 2 spots.
new version of HB is available, hopefully we can get an updated plugin version I managed to jerry-rig it to work and I can post that here if people would be interested in a temporary fix until the author releases a full new version
I would also like that work-around, if possible. I tried sending you a private message but apparently it didn't work. To the author: My error, which probably is the same to the rest is in Pokehbuddy.cs(282,30) : error CS0115 (OnEnable/OnDisable) which is beyond my understanding
