Hi i keep getting the same error session is invalid. attached is my log that you asked me to upload when i was on live support but i am not sure how to upload when i ping auth3.buddy.com View attachment 27-08-2011_11_27 AM 8268 Log.txt
Yes i'm having the same problem , after awhile the bot just stops and say's "session is invalid" then have to shut the bot down and start fresh or it just bugs out. when i get home i'll run mine and get a log and up load it. "Honorbuddy_2.0.0.5198"
Please do the following via a command prompt with administrator privs: ping auth3.buddyauth.com tracert auth3.buddyauth.com pathping auth3.buddyauth.com Screenshots, or copied output will be fine. (I do need all of the output though)
View attachment ping update.txt C:\Users\Matthew>ping auth3.buddyauth.com Pinging auth3.buddyauth.com [188.165.14.154] with 32 bytes of data: Reply from 188.165.14.154: bytes=32 time=347ms TTL=106 Reply from 188.165.14.154: bytes=32 time=348ms TTL=106 Reply from 188.165.14.154: bytes=32 time=348ms TTL=106 Reply from 188.165.14.154: bytes=32 time=346ms TTL=106 Ping statistics for 188.165.14.154: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 346ms, Maximum = 348ms, Average = 347ms C:\Users\Matthew>tracert auth3.buddyauth.com Tracing route to auth3.buddyauth.com [188.165.14.154] over a maximum of 30 hops: 1 1 ms <1 ms <1 ms 192.168.0.1 2 143 ms 49 ms 49 ms 172.18.113.73 3 49 ms 47 ms 48 ms 172.18.74.234 4 50 ms 49 ms 48 ms 172.18.243.142 5 53 ms 50 ms 49 ms 172.18.243.137 6 64 ms 49 ms 49 ms Bundle-Ether10.pie8.Perth.telstra.net [120.151.110.9] 7 112 ms 52 ms 170 ms Bundle-Ether1.pie-core1.Perth.telstra.net [203.50.6.221] 8 219 ms 218 ms 244 ms GigabitEthernet1-2.pthp-core01.Perth.net.reach.com [203.50.13.238] 9 445 ms 506 ms 1076 ms i-5-2-0.6ntp-core01.bx.reach.com [202.84.141.114] 10 1278 ms 153 ms 165 ms i-1-0-1.6ntp01.bi.reach.com [202.84.180.142] 11 759 ms 913 ms 887 ms 202.79.197.7 12 605 ms 626 ms 659 ms f-ee4-i.F.DE.NET.DTAG.DE [62.154.15.10] 13 625 ms 652 ms 667 ms fra-1-6k.de.eu [94.23.122.153] 14 657 ms 649 ms 689 ms rbx-g1-a9.fr.eu [91.121.131.197] 15 739 ms 798 ms 790 ms rbx-s4-6k.fr.eu [178.33.100.58] 16 744 ms 430 ms 348 ms ns60967.ovh.net [188.165.14.154] Trace complete. C:\Users\Matthew>pathping auth3.buddyauth.com Tracing route to auth3.buddyauth.com [188.165.14.154] over a maximum of 30 hops: 0 Matthew-PC [192.168.0.2] 1 192.168.0.1 2 172.18.113.73 3 172.18.74.34 4 172.18.243.142 5 172.18.243.137 6 Bundle-Ether10.pie8.Perth.telstra.net [120.151.110.9] 7 Bundle-Ether1.pie-core1.Perth.telstra.net [203.50.6.221] 8 GigabitEthernet1-2.pthp-core01.Perth.net.reach.com [203.50.13.238] 9 i-5-2-0.6ntp-core01.bx.reach.com [202.84.141.114] 10 i-1-0-1.6ntp01.bi.reach.com [202.84.180.142] 11 202.79.197.7 12 f-ee4-i.F.DE.NET.DTAG.DE [62.154.15.10] 13 fra-1-6k.de.eu [94.23.122.153] 14 rbx-g1-a9.fr.eu [91.121.131.197] 15 rbx-s4-6k.fr.eu [178.33.100.58] 16 ns60967.ovh.net [188.165.14.154] Computing statistics for 400 seconds... Source to Here This Node/Link Hop RTT Lost/Sent = Pct Lost/Sent = Pct Address 0 Matthew-PC [192.168.0.2] 0/ 100 = 0% | 1 0ms 0/ 100 = 0% 0/ 100 = 0% 192.168.0.1 0/ 100 = 0% | 2 51ms 0/ 100 = 0% 0/ 100 = 0% 172.18.113.73 0/ 100 = 0% | 3 49ms 90/ 100 = 90% 90/ 100 = 90% 172.18.74.34 0/ 100 = 0% | 4 --- 100/ 100 =100% 100/ 100 =100% 172.18.243.142 0/ 100 = 0% | 5 --- 100/ 100 =100% 100/ 100 =100% 172.18.243.137 0/ 100 = 0% | 6 49ms 0/ 100 = 0% 0/ 100 = 0% Bundle-Ether10.pie8.Perth.telstra. net [120.151.110.9] 0/ 100 = 0% | 7 52ms 0/ 100 = 0% 0/ 100 = 0% Bundle-Ether1.pie-core1.Perth.tels tra.net [203.50.6.221] 0/ 100 = 0% | 8 108ms 0/ 100 = 0% 0/ 100 = 0% GigabitEthernet1-2.pthp-core01.Per th.net.reach.com [203.50.13.238] 0/ 100 = 0% | 9 212ms 0/ 100 = 0% 0/ 100 = 0% i-5-2-0.6ntp-core01.bx.reach.com [ 202.84.141.114] 0/ 100 = 0% | 10 212ms 0/ 100 = 0% 0/ 100 = 0% i-1-0-1.6ntp01.bi.reach.com [202.8 4.180.142] 0/ 100 = 0% | 11 --- 100/ 100 =100% 100/ 100 =100% 202.79.197.7 0/ 100 = 0% | 12 --- 100/ 100 =100% 100/ 100 =100% f-ee4-i.F.DE.NET.DTAG.DE [62.154.1 5.10] 0/ 100 = 0% | 13 401ms 0/ 100 = 0% 0/ 100 = 0% fra-1-6k.de.eu [94.23.122.153] 0/ 100 = 0% | 14 351ms 0/ 100 = 0% 0/ 100 = 0% rbx-g1-a9.fr.eu [91.121.131.197] 0/ 100 = 0% | 15 405ms 0/ 100 = 0% 0/ 100 = 0% rbx-s4-6k.fr.eu [178.33.100.58] 0/ 100 = 0% | 16 349ms 0/ 100 = 0% 0/ 100 = 0% ns60967.ovh.net [188.165.14.154] Trace complete.
i got the same prob today a lot of session invalid. but just using Gatherbuddy, in my other bot ( Questing ) works realy good
Here are the logs i was able to get , Since i have gotten the "Honorbuddy_2.0.0.5198" is this normal to have over 65 logs ?
Anyone having this problem? It has been since the last update. I have completely removed all HB files and replaced. I have "repaired" the wowclient. Logging in... Buddy Sessions: 0/0 ----- Shared Sessions: 1/3 Error attaching Honorbuddy to WoW! - The type initializer for 'MainDev.RemoteASM.RemoteAsm' threw an exception. ------------------------------- You have not selected a valid instance of WoW to attach to! Please restart Honorbuddy and choose a valid instance of WoW to use Honorbuddy with! This version of Honorbuddy only supports WoW Build #14480 You are currently on build #14480
make sure that you are followinbg all the steps http://www.thebuddyforum.com/honorb...5-quick-hb-guide-presentation-fast-setup.html
I have everything set up to what I believe is the correct way. I never had problems with HB before, so it strikes me odd that I'm so lost right now. I saw another post just like mine that had no response to it under the release thread. What does this mean? The type initializer for 'MainDev.RemoteASM.RemoteAsm' threw an exception.
Apoc had hard times with the US storm still waiting some answers from him have you made any changes on your net framework lately?
I checked to see that I was running the proper net framework today and I was. I also haven't made any changes to my computer (on purpose). I'm most confused because it all worked fine until the last WoW patch and it even says I'm running HB that supports the current version of wowclient
i have the same problem with Code: session invalid some logs: Code: ... [01:19:54:695] Changed POI to:Type: Sell, Name: Grella [01:19:55:415] InteractDebug:1147876648 [01:19:55:443] Interact Done:1147876648 [01:19:56:357] Activity: Selling Items [01:19:56:928] Stop called! [01:19:56:950] Activity: Honorbuddy Stopped [01:19:56:998] Session is invalid! [01:19:57:068] System.Threading.ThreadAbortException: Thread was being aborted. at Styx.Logic.BehaviorTree.TreeRoot.Tick() at Styx.Logic.BehaviorTree.TreeRoot.Run() [01:19:57:069] System.Threading.ThreadAbortException: Thread was being aborted. at Styx.Logic.BehaviorTree.TreeRoot.Run() Code: ... [16:01:39:810] Activity: Honorbuddy Stopped [16:01:39:829] System.Threading.ThreadAbortException: Thread was being aborted. at System.Threading.Thread.SleepInternal(Int32 millisecondsTimeout) at System.Threading.Thread.Sleep(Int32 millisecondsTimeout) at Styx.Logic.BehaviorTree.TreeRoot.Tick() at Styx.Logic.BehaviorTree.TreeRoot.Run() [16:01:39:830] System.Threading.ThreadAbortException: Thread was being aborted. at Styx.Logic.BehaviorTree.TreeRoot.Run() [16:35:02:415] Stop called! [16:35:02:415] Session is invalid! [16:35:26:428] Logging in... [16:35:26:638] [16:35:26:925] ------------------------------- [16:35:26:925] You have not selected a valid instance of WoW to attach to! [16:35:26:926] Please restart Honorbuddy and choose a valid instance of WoW to use Honorbuddy with! [16:35:26:926] This version of Honorbuddy only supports WoW Build #14480 [16:35:26:926] You are currently on build #14480 [16:35:26:926] ------------------------------- Code: ... [20:04:32:688] Activity: Honorbuddy Stopped [20:04:32:710] Session is invalid! [20:04:32:718] System.Threading.ThreadAbortException: Thread was being aborted. at Styx.Logic.BehaviorTree.TreeRoot.Tick() at Styx.Logic.BehaviorTree.TreeRoot.Run() [20:04:32:719] System.Threading.ThreadAbortException: Thread was being aborted. at Styx.Logic.BehaviorTree.TreeRoot.Run() [20:07:18:109] Logging in... [20:07:18:279] [20:07:18:566] ------------------------------- [20:07:18:566] You have not selected a valid instance of WoW to attach to! [20:07:18:567] Please restart Honorbuddy and choose a valid instance of WoW to use Honorbuddy with! [20:07:18:568] This version of Honorbuddy only supports WoW Build #14480 [20:07:18:568] You are currently on build #14480 [20:07:18:568] ------------------------------- View attachment 21.08.2011_14_06 4204 Log.txt View attachment 25.08.2011_19_20 5840 Log.txt View attachment 27.08.2011_18_45 5992 Log.txt View attachment 29.08.2011_22_05 4508 Log.txt
Sorry folks, storm kinda played havoc with me. I'll be looking into this within the next hour (once I actually wake up enough to think properly) I noticed the issue myself one my bots. However, it was very intermittent. Edit; I take that back. I'll be looking into it once the US servers come back online.
We are working on this at the moment. Its an insanely annoying bug in that its intermittent and hard to reproduce on our own machines but hopefully we will have a result in a day or so.
it happens a lot to me if i do this: stop, hearth, do a few things manually -- sell items, trade loot, etc, then try to start the bot again. 8/10 times it'll get session invalid. Not the same issue, but maybe it'll help tracking it down as well. on a disconnect: stop hb, relogin --> session invalid relogin with HB still running -- > crash (but only on one of my accts, the other seems to carry on)
I figured out my problem...when it says This version of Honorbuddy only supports WoW Build #14480 You are currently on build #14480 This is because the updater file did not get copied from the zipped folder. if it says you are on build 0, then you need to run as admin and it should work
