You should check out the E3 footage: Star Wars: The Old Republic | News Articles There's some damn awesome sexy stuff in there
Just pushed a release that fixes the mount issues. Restart BW, accept the Update and it should be OK.
There appears to be a memory reading error. Restart the bot and swtor if it won't clear itself. The profiles are huge and they get messed up if you do parts manually.
My bot can't repair, it just keeps clicking the vendor all day, and doesn't right itself, causing an infinite loop. Any fixes for this? I was on Ord Mantell.
I'm having the exact same issue rolled a new bounty hunter gets to the repair person for the first time and cannot repair itself and loops over and over trying to.
I've run into a couple of cases (on an Imperial Agent) where it is trying to pickup or turnin a quest from a repair droid instead of the appropriate NPC. Read the status line at the bottom of Buddywing, and if that is your case also, locate the appropriate questgiver, interact with it manually, then restart the profile. cheers, chinajade
Anyone else having this problem? Buddywing will run to a quest location, but will not attack mobs. My character will buff itself, shield itself and companion, and throw out a weak heal-- no damage. See log. Thank you.
5. I tried uploading my log but it was 5 MB or something. O_O Anyway, it was running up and down the stairs searching for targets for a Bonus-grind (it couldn't find any!) and then it died to too many pulls. Afterwards, it went up to the vendor to repair and got stuck at Fort Garrick, I believe.
To add to the event, the bot will go into the exhaustion zone upon Rezzing on the beach. Then it will kill itself, making short bursts of "Lock and Load" (or whatever that healing skill is) then walking. The bot seems to have a major problem processing more than one event, and will cut itself off, which I think may be a huge problem.
Couple issues I've run into: - Every once and a while the bot decides to try and target a corpse at 0% health while in the middle of combat, leading to a huge amount of targeting attempts and the combat log getting spammed. Usually ends either when the companion kills the group of mobs, or both my char and the companion die. - The bot has some trouble with mobs with large hitboxes. I know melee distance is set in WingIt, but not sure on the best way to adjust it to handle mobs of different sizes. Larger mobs the bot will continue to try to get closer, leading to the mob backing up, and it repeats while getting random hits in between. - If for some reason the client disconnects from the server, the bot will spam the log with errors rather than realizing the disconnect and stopping. With the downtime this morning, I had about 30mb worth of log full of repeat error spamming because the bot didnt know the client had disconnected. My log was large enough that its too big to post and would be equally painful to dig through, but if logs are needed I can try and reproduce any of the issues and post them.
Anyway to add where you get to pick what client you want to bot? (HonorBuddy does this with wow) As of right now I'm using innerspace to multibox (run more then 1 client). When start BuddyWing it picks the client loaded 2nd. [Edit] I tried switching which one logs in first, and it picked the 1st one. So its random, or picks 1 class over another when multiple clients running. [Edit] Once I get both clients up and going. The BuddyWing will attach itself to 2nd client. If I want to bot on 1st client I cant. When try to run a 2nd BuddyWing, even one in a seperate folder I get "BuddyWing is already running!" So how can I take advantage of the 3 sessions I paid for if can only run 1 BuddyWing?
I assume that with the built-in 10-50 profiles the bot will level everything but individual class quests?
well i payed for bot and now my toon is still not moving so it seems this is still in beta but a payed for beta
Something I noticed that until I added in an advanced tree choice at level ten it did nothing in regards to pulling. Once I added my one advanced tree option it got it back up and running. I also still have he bot trying to meditate and run around at the same time.
Here is the log CodenameG Code: [00:53:11.221 N] Starting Buddy Wing v1.0.821.241 [00:53:18.182 N] Logging in... [00:53:19.378 N] Login Success! [00:53:21.496 D] First CPU: Intel(R) Core(TM)2 Duo CPU T9500 @ 2.60GHz [00:53:21.497 D] OS Version: Windows NT 6.1.7601 Service Pack 1 [00:53:21.497 D] App Path: H:\G4M3S\PC Bots\SWTORBW\Buddywing.exe [00:53:22.225 D] Current build number: 913394 [00:53:22.238 D] Loading client.gom.. [00:53:22.577 D] Loaded client.gom! [00:53:23.996 D] Took 1262ms to get the nodes list. [00:53:23.996 D] There are 100863 nodes. [00:53:23.996 D] DomList has 4294967295/17944032 [00:53:24.192 D] _BaseClient handled. [00:53:24.192 D] utlStaticDefinitions handled. [00:53:24.193 D] strOracle handled. [00:53:24.193 D] ablOracle handled. [00:53:24.193 D] gmOracle handled. [00:53:24.193 D] Debug Draw Oracle added. [00:53:24.193 D] dbgDrawOracle handled. [00:53:24.193 D] mapOracle handled. [00:53:24.193 D] chrOracle handled. [00:53:24.193 D] qstOracle handled. [00:53:24.216 D] spnOracle handled. [00:53:24.216 D] cnvOracle handled. [00:53:24.216 D] ctlOracle handled. [00:53:24.217 D] _InputHandler handled. [00:53:24.511 D] ablTrainerOracle handled. [00:53:24.516 D] prfOracle handled. [00:53:24.573 D] Adding input layer ctlInputCamera - 3B9B1402 [00:53:24.573 D] sysInputLayer handled. [00:53:24.574 D] Adding input layer ctlInputMouse - 3B9B140F [00:53:24.574 D] sysInputLayer handled. [00:53:24.574 D] Adding input layer ctlInputMovement - 3B9B1413 [00:53:24.574 D] sysInputLayer handled. [00:53:24.574 D] Adding input layer ctlInputVehicle - 3B9B1428 [00:53:24.574 D] sysInputLayer handled. [00:53:24.575 D] Adding input layer ctlInputTargetting - 3B9B1434 [00:53:24.575 D] sysInputLayer handled. [00:53:24.575 D] Adding input layer ctlInputGame - 3B9B1456 [00:53:24.575 D] sysInputLayer handled. [00:53:24.577 D] Adding input layer ctlInputUI - 3B9B149D [00:53:24.577 D] sysInputLayer handled. [00:53:24.578 D] Adding input layer ctlInputConvo - 3B9B14CD [00:53:24.578 D] sysInputLayer handled. [00:53:24.578 D] Adding input layer ctlInputCharacterSelection - 3B9B14DF [00:53:24.578 D] sysInputLayer handled. [00:53:24.578 D] Adding input layer ctlInputCreditsScreen - 3B9B14E5 [00:53:24.578 D] sysInputLayer handled. [00:53:24.579 D] Adding input layer ctlInputUtility - 3B9B14E7 [00:53:24.579 D] sysInputLayer handled. [00:53:24.579 D] Adding input layer ctlInputLoadingScreen - 3B9B14F3 [00:53:24.579 D] sysInputLayer handled. [00:53:24.582 D] guiApiGfx handled. [00:53:25.545 D] Took 1549ms to process the node list [00:53:26.909 N] User is a Trooper [00:53:26.909 V] Routine Path: Routines [00:53:31.431 D] Reloading AssemblyLoader<Buddy.CommonBot.ICombat> - Initializing [00:53:40.831 D] Reloading AssemblyLoader<Buddy.CommonBot.ICombat> - RoutineManager.Reload [00:53:42.782 D] Reloading AssemblyLoader<Buddy.CommonBot.ICombat> - RoutineManager.Reload !THROTTLED! [00:53:42.782 D] Routines were reloaded. New routine list: [00:53:42.782 D] WingIt - All In One v1.0.821.241 [00:53:42.782 D] Routines were reloaded. New routine list: [00:53:42.782 D] WingIt - All In One v1.0.821.241 [00:53:42.806 N] [WingIt] Level: 19 [00:53:42.806 N] [WingIt] Class: Trooper [00:53:42.941 N] [WingIt] Advanced Class: Vanguard (Tactics) [00:53:43.006 N] [WingIt] Building method list [00:53:43.008 N] [WingIt] Added 203 methods [00:53:43.014 N] [WingIt] VanguardTacticsOutOfCombat is a match! [00:53:43.014 N] [WingIt] Using VanguardTacticsOutOfCombat for OutOfCombat (Priority: 0) [00:53:43.067 N] [WingIt] VanguardTacticsCombat is a match! [00:53:43.067 N] [WingIt] Using VanguardTacticsCombat for Combat (Priority: 0) [00:53:43.104 N] [WingIt] VanguardTacticsPull is a match! [00:53:43.104 N] [WingIt] Using VanguardTacticsPull for Pull (Priority: 0) [00:53:43.104 N] Chose WingIt - All In One as your combat routine. [00:53:43.104 N] [WingIt] Level: 19 [00:53:43.105 N] [WingIt] Class: Trooper [00:53:43.151 N] [WingIt] Advanced Class: Vanguard (Tactics) [00:53:43.167 N] [WingIt] VanguardTacticsOutOfCombat is a match! [00:53:43.167 N] [WingIt] Using VanguardTacticsOutOfCombat for OutOfCombat (Priority: 0) [00:53:43.196 N] [WingIt] VanguardTacticsCombat is a match! [00:53:43.196 N] [WingIt] Using VanguardTacticsCombat for Combat (Priority: 0) [00:53:43.201 N] [WingIt] VanguardTacticsPull is a match! [00:53:43.201 N] [WingIt] Using VanguardTacticsPull for Pull (Priority: 0) [00:53:43.205 D] Reloading AssemblyLoader<Buddy.Common.Plugins.IPlugin> - Initializing [00:53:46.496 D] There are 2 plugins. [00:53:47.474 N] Current bot set to Quest Bot [00:53:47.499 N] Loaded profile [R - Light] 17-21 Taris [Kick] [00:53:47.506 N] Sell quality set to Premium. [00:53:47.528 N] Buddy Wing: The Old Robot is ready! [00:53:56.061 N] Chest looting enabled. [00:54:08.742 D] Start/Stop Button Clicked! [00:54:08.743 D] BotMain.Start() called [00:54:08.744 D] Forcing profile reload. -- Temporary fix for behavior cache issues during start/stop. [00:54:09.383 N] Current bot set to Quest Bot [00:54:09.388 N] Loaded profile [R - Light] 17-21 Taris [Kick] [00:54:09.388 D] Starting bot Quest Bot [00:54:09.403 D] Added new hook [RoutineCombat] 1415f349-b9d1-4968-8585-84f2da3ded95 [00:54:09.410 D] Added new hook [HotspotPoi] d5154c87-d620-4310-a44c-fa32ec6aad3b [00:54:09.414 D] Added new hook [SellVendorPoi] 1f2ead7e-629e-439f-bae5-c9619743441f [00:54:09.416 D] Added new hook [SetLootPoi] fd4c21cf-c6f7-4202-b959-5a5365b4cfd1 [00:54:09.416 D] Added new hook [SetCombatPoi] 8f5c6844-938e-4074-8a35-f2f42cff6caf [00:54:09.416 D] Added new hook [SetVendorPoi] b9d9737e-2aea-4bf7-8b1f-1948e865e1e6 [00:54:09.416 D] Added new hook [SetHotspotPoi] 1a0cdfcd-5a42-4036-a709-4ee7bc03eeed [00:54:09.416 D] Added new hook [SelectPoiType] 5448fd76-e356-4c67-ba84-395ffc0a9b61 [00:54:09.419 D] Replaced hook [SelectPoiType] a9c43282-d53c-4f62-9c3f-9b3cc81cd474 [00:54:09.419 D] Setting force alignment settings. [00:54:09.424 D] Spooling up bot thread. [00:54:09.428 D] Bot thread started. [00:54:37.892 V] [Poi.Clear] Reason: Current quest behavior changed to UserDialogTag: DialogFinished: True, DialogMessage: This profile is un-tested and I will not be taking QQ's at this time, DialogTitle: Kick, QuestId: 0, BranchId: 0, StepId: 0, TaskId: 0, QuestName: Quest Id: 0, IsDoneCache: True, Behavior: null, . [00:54:37.903 D] Replaced hook [QuestProfileBehavior_Hook] 4c1080fc-01e1-4e18-b94e-c839c5dcfb4b [00:55:02.903 N] Grind Area changed to Catalyst 2 [00:55:02.904 V] [Poi.Clear] Reason: Current quest behavior changed to GrindTag: GrindRef: Catalyst 2, WhileCondition: (not IsStepComplete(0xE000DFBFD200A6CA, 2)), QuestId: 0, BranchId: 0, StepId: 0, TaskId: 0, QuestName: Quest Id: 0, IsDoneCache: False, Behavior: Buddy.Common.HookExecutor, . [00:55:02.904 D] Replaced hook [QuestProfileBehavior_Hook] 0e788c86-6a16-4f96-b31b-b4d58142f0eb [00:55:11.495 N] Fully Rested [00:59:25.654 D] Start/Stop Button Clicked! [00:59:25.655 D] BotMain.Stop() called [00:59:25.656 N] Stopping the bot. [00:59:25.756 D] Sleeping while waiting on execution state to be available for BotMain.Stop() [00:59:27.756 D] We slept way too long waiting for the bot thread to give control back. Aborting thread. Client may crash! [00:59:27.794 V] [Poi.Clear] Reason: Bot Stopped [00:59:27.795 D] Resetting force alignment settings. [00:59:27.797 D] QuestOrderManager.OnBotStop(). Resetting caches. [00:59:28.020 D] Exception while pulsing plugin Use Lockboxes: System.Threading.ThreadAbortException: Thread was being aborted. at System.Threading.WaitHandle.WaitOneNative(SafeHandle waitableSafeHandle, UInt32 millisecondsTimeout, Boolean hasThreadAffinity, Boolean exitContext) at System.Threading.WaitHandle.InternalWaitOne(SafeHandle waitableSafeHandle, Int64 millisecondsTimeout, Boolean hasThreadAffinity, Boolean exitContext) at System.Threading.WaitHandle.WaitOne(Int32 millisecondsTimeout, Boolean exitContext) at GreyMagic.Executor.Execute() at ...ctor() at Buddy.Swtor.Objects.TorItem.get_Name() at Buddywing.Plugins.OpenLockboxesPlugin.OnPulse() in h:\G4M3S\PC Bots\SWTORBW\Plugins\OpenLockboxes\OpenLockboxesPlugin.cs:line 54 at Buddy.Common.Plugins.PluginManager.PulsePlugin(IPlugin plugin) [00:59:28.020 D] Bot Thread Aborted Thread was being aborted. [00:59:28.886 D] Start/Stop Button Clicked! [00:59:28.886 D] BotMain.Start() called [00:59:28.886 D] Forcing profile reload. -- Temporary fix for behavior cache issues during start/stop. [00:59:30.297 N] Current bot set to Quest Bot [00:59:30.302 N] Loaded profile [R - Light] 17-21 Taris [Kick] [00:59:30.302 D] Starting bot Quest Bot [00:59:30.302 D] Added new hook [RoutineCombat] 1415f349-b9d1-4968-8585-84f2da3ded95 [00:59:30.302 D] Added new hook [HotspotPoi] d169b796-fbec-4f33-a7d8-8854a776a7eb [00:59:30.302 D] Added new hook [SellVendorPoi] ea312118-5193-477e-8772-89580049d277 [00:59:30.302 D] Added new hook [SetLootPoi] 4caa962c-fc92-4044-b185-60d5bca6ba1f [00:59:30.302 D] Added new hook [SetCombatPoi] 07aabe93-07ba-4b11-9a39-8e8a72c81af5 [00:59:30.302 D] Added new hook [SetVendorPoi] 1f7f5d89-8817-4acf-b808-59c4f16b87c4 [00:59:30.302 D] Added new hook [SetHotspotPoi] 8eeeccca-112f-4473-9723-3aae4fcb939d [00:59:30.302 D] Added new hook [SelectPoiType] 049bfc55-ac94-4be9-b54d-a13dfc35f5d6 [00:59:30.302 D] Replaced hook [SelectPoiType] ff62e020-f135-47f7-9d98-2ffc581b9899 [00:59:30.302 D] Setting force alignment settings. [00:59:30.302 D] Spooling up bot thread. [00:59:30.304 D] Bot thread started. [00:59:32.913 V] [Poi.Clear] Reason: Current quest behavior changed to UserDialogTag: DialogFinished: True, DialogMessage: This profile is un-tested and I will not be taking QQ's at this time, DialogTitle: Kick, QuestId: 0, BranchId: 0, StepId: 0, TaskId: 0, QuestName: Quest Id: 0, IsDoneCache: True, Behavior: null, . [00:59:32.913 D] Replaced hook [QuestProfileBehavior_Hook] 7580f2b3-84cd-441e-b62c-7d5fb1ecf4ce [01:02:58.701 D] Start/Stop Button Clicked! [01:02:58.701 D] BotMain.Stop() called [01:02:58.701 N] Stopping the bot. [01:02:58.801 D] Sleeping while waiting on execution state to be available for BotMain.Stop() [01:03:00.801 D] We slept way too long waiting for the bot thread to give control back. Aborting thread. Client may crash! [01:03:00.862 V] [Poi.Clear] Reason: Bot Stopped [01:03:00.862 D] Resetting force alignment settings. [01:03:00.862 D] QuestOrderManager.OnBotStop(). Resetting caches. Not sure how to attach the file sorry
View attachment 2012-06-06 03.55.txt <- Illum lvl 50 Vanguard Bot start and wont move. View attachment 2012-06-06 03.55.txt <- Stoping the bot
Thoroughly read the popup You paid for the bot... to farm and do end game stuff. We don't have supported questing out for 10+ yet, as stated on the buy page the profiles are still in development, hence this popup: [00:59:32.913 V] [Poi.Clear] Reason: Current quest behavior changed to UserDialogTag: DialogFinished: True, DialogMessage: This profile is un-tested and I will not be taking QQ's at this time