[A-Quest]The Jade Forest(85-86)

nice question
tbh dont have a good answer for that, will start my holydays till November tomorrow, have nothing else to do beside finish this profiles, so right now im thinking finish part 86->90 then start back at 12->85
my main question to myself is should do i first finish all alliance and then start Hord? or do both at same time? tomorrow will think about that and start

 

alliance is tha way to go bro

 

Most of the quests are neutral based. You can easily make the profiles at the same time. The Jade Forest is the only area where its not very neutral.

 

Maybe it could help to know Kick seems to be working on Horde profiles (in his SVN) you should ask him.

 

Not a big deal since your profile is made to to not loot. And with no looting there would be no issue.
The Quest Hue:
Where you shear the amberfly wings. One of my profile runners is a skinner, hence why I wanted the profile to loot so that I could skin. My druid skins the mobs before the shear, leaving no body left to shear for the Amberfly wings. Unless there is any easy profile fix this is more of a warning to people.

Loving the profile though running two characters at same time.

 

Just finished running the profile once and going again. Overall its pretty smooth i just tossed in a bit of interaction to help speed things up when i'm around. The only changes i made to the profile while leveling was turned on looting all mobs and changed the sell profile cause i noticed it was selling all my greens and white ( cooking )

Cheers and keep up the great work

 

Testing this now


It had a problem getting into the chopper:

Code:

System.NullReferenceException: Object reference not set to an instance of an object.
   at Š..get_IsTiled()
   at Tripper.Navigation.WowNavigator.LoadTile(TileIdentifier wowTile)
   at Tripper.Navigation.WowNavigator.FindPath(Vector3 start, Vector3 end)
   at Styx.Pathing.MeshNavigator.MoveTo(WoWPoint location)
   at Styx.Pathing.Navigator.MoveTo(WoWPoint location)
   at Styx.Bot.Quest_Behaviors.MountVehOnly.<CreateBehavior>b__13(Object ret) in c:\Users\joseph\Desktop\Honorbuddy\Quest Behaviors\MountVehOnly.cs:line 172
   at Styx.TreeSharp.Action.RunAction(Object context)
   at Styx.TreeSharp.Action.
.
()
   at Styx.TreeSharp.Composite.Tick(Object context)
   at Styx.TreeSharp.Sequence.
.
()
   at Styx.TreeSharp.Composite.Tick(Object context)
   at Styx.TreeSharp.DecoratorContinue.
.
()
   at Styx.TreeSharp.Composite.Tick(Object context)
   at Styx.TreeSharp.Sequence.
.
()
   at Styx.TreeSharp.Composite.Tick(Object context)
   at Styx.TreeSharp.Decorator.
.
()
   at Styx.TreeSharp.Composite.Tick(Object context)
   at Styx.TreeSharp.PrioritySelector.
.
()
   at Styx.TreeSharp.Composite.Tick(Object context)
   at Bots.Quest.Actions.ForcedBehaviorExecutor.
.
()
   at Styx.TreeSharp.Composite.Tick(Object context)
   at Bots.Quest.Actions.ForcedBehaviorExecutor.
.
()
   at Styx.TreeSharp.Composite.Tick(Object context)
   at Bots.Quest.Actions.ForcedBehaviorExecutor.
.
()
   at Styx.TreeSharp.Composite.Tick(Object context)
   at Styx.TreeSharp.PrioritySelector.
.
()
   at Styx.TreeSharp.Composite.Tick(Object context)
   at Styx.TreeSharp.PrioritySelector.
.
()
   at Styx.TreeSharp.Composite.Tick(Object context)
   at Styx.CommonBot.TreeRoot.()
Cleared POI - Reason Exception in Root.Tick()
Cleared POI
[CanCast] Conjure Refreshment Table 43987
System.NullReferenceException: Object reference not set to an instance of an object.
   at Š..get_IsTiled()
   at Tripper.Navigation.WowNavigator.LoadTile(TileIdentifier wowTile)
   at Tripper.Navigation.WowNavigator.FindPath(Vector3 start, Vector3 end)
   at Styx.Pathing.MeshNavigator.MoveTo(WoWPoint location)
   at Styx.Pathing.Navigator.MoveTo(WoWPoint location)
   at Styx.Bot.Quest_Behaviors.MountVehOnly.<CreateBehavior>b__13(Object ret) in c:\Users\joseph\Desktop\Honorbuddy\Quest Behaviors\MountVehOnly.cs:line 172
   at Styx.TreeSharp.Action.RunAction(Object context)
   at Styx.TreeSharp.Action.
.
()
   at Styx.TreeSharp.Composite.Tick(Object context)
   at Styx.TreeSharp.Sequence.
.
()
   at Styx.TreeSharp.Composite.Tick(Object context)
   at Styx.TreeSharp.DecoratorContinue.
.
()
   at Styx.TreeSharp.Composite.Tick(Object context)
   at Styx.TreeSharp.Sequence.
.
()
   at Styx.TreeSharp.Composite.Tick(Object context)
   at Styx.TreeSharp.Decorator.
.
()
   at Styx.TreeSharp.Composite.Tick(Object context)
   at Styx.TreeSharp.PrioritySelector.
.
()
   at Styx.TreeSharp.Composite.Tick(Object context)
   at Bots.Quest.Actions.ForcedBehaviorExecutor.
.
()
   at Styx.TreeSharp.Composite.Tick(Object context)
   at Bots.Quest.Actions.ForcedBehaviorExecutor.
.
()
   at Styx.TreeSharp.Composite.Tick(Object context)
   at Bots.Quest.Actions.ForcedBehaviorExecutor.
.
()
   at Styx.TreeSharp.Composite.Tick(Object context)
   at Styx.TreeSharp.PrioritySelector.
.
()
   at Styx.TreeSharp.Composite.Tick(Object context)
   at Styx.TreeSharp.PrioritySelector.
.
()
   at Styx.TreeSharp.Composite.Tick(Object context)
   at Styx.CommonBot.TreeRoot.()
Cleared POI - Reason Exception in Root.Tick()
Cleared POI
[CanCast] Conjure Refreshment Table 43987 

 

Noticed this on both times that I ran The "Finding your center" quest, ID 29890, Both times before picking up quest the bot runs out of dreamers pavilion, down the stairs and along the path to the T section. After looking at the code I saw this Run To Condition, line 1405 <RunTo X="-424.5504" Y="-2367.695" Z="6.852459".

Also Quest I have no Jade and I must Scream. Bot just kept running in circles from hotspot to hotspot with out attacking anything even after being attacked by the sprites. Stopped and restarted Profile and it started working correctly.

 

Im having a problem when quests are accepted, the bot will loop on the last quest accepted and not continue until i manually complete the quest.

 

Quest Name: The Great Banquet, Speak with Elder Cloudfall. The bot runs to Elder Cloudfall, then moves to Xiao and tries to interact without doing the dialog or completing elder cloudfall bit. This happened on both my Characters. I manually completed on the first run through. The 2nd run through I tried abandoning the quest. This time through the bot interacted correctly for the first part of the Elder Cloudfall bit however did not complete the quest before running to Xiao.

Full log in the Zip file, stopped the bot while it was happening so it will be right at the bottom.

 

Great job bro! run smoothly with my priest.
But when I run it with my shaman, something weird happened....the bot picks the quest repeatedly even it has been picked. Any solution?

 

awesome work cava thanks

 

Toon didnt mount the gyrocopter for quest Unleash Hell - ID 31732. I had to mount manually

 

haha, well I would personally prefer Ally for 86-90, since I have several 85-86 characters that I would love to get up to 90. its so lonly for my main. hehe

but anyways, From 12-85, maybe the best thing would be to do them at the same time. Since there are no hurry, in getting the profiles done up to 85, I guess.

btw: On the quest "I have no jade and I just scream"
The bot turns the pull distance to 1, and just runs around, ending up not getting any.
You should turn up the pull distance here, so that the bot is able to loot the items. since they appear when the mobs die

And I think that you have the wrong coords for the quest giver "Outcast Sprite"
The correct position of the mob/questgiver is:
<Vendor Name="Outcast Sprite" Entry="55438" Type="Questgiver" X="2491.445" Y="-1946.844" Z="217.6123" />
but the profile tells my char to go to:
"<X=2532,707, Y=-1972,565, >= 217,012>"

It seems to have some trouble with "Back to nature" also.

need to increase the pull distance on: "To bridge earth and sky" aswell.
if it is set to 1, the bot doesn ot seem to attack the mobs.

Quest: Pei-Back
The bot is supposed to righclick the characters body, asap when it gets ripped out of the body.

 

imo u should make the 85-90 profil. I think its more ppl that wants to get all there 85 alts (from cata) to 90 asap. And for me I would like ally Awsome work man, keep it up.

 

best profile out...!!! gogogo up for the next ones
thank you very much!!

some little bugs.. it two times dows not find a quest giver..
the first one hm i don?t remember
the second problem /quest giver was ist was searching for a quest giver and was standing under the tree with the oranges you have to pick up...
i picked them up myself, turned it in and restarted the profile..
i picked up the great banquet quest. there was a third problem with not turning in the quest and running to next quest giver trying to get the next quest, wich of course was not available.
i turned in the great banquet and restarted...

now it?s running again...


blood dk lvl 88 using singular

 

Mesh problem, need change place where char move to avoid that
thanks for testing

 

yes i remember that, when was coding, for some problem ( that i cant remember now), i was forced to make bot run out till (remove the contact with npc) that place and run back again to continue

 

will check that asap

Thanks for testing

 

yes you are right there are a big issue with that , i didnt so far reported that bug cause i already reported a few bugs and no1 is fixed, probably dev have urgent things to do before they start fixing reported bugs.
let me try explain that bug , for example this run (bot need pick-up 2 quests and turn-in that 2 quests:

accept quest n? 1
accept quest n? 2
turn-in quest n?1
turn-in quest n?2

if u hit start and dont interrupt bot will do that without errors but if u do this:
accept quest n? 1
accept quest n? 2
stop bot here
turn-in quest n?1
turn-in quest n?2

you stoped bot after he put code turn-in quest n? 1, at this moment bot have in memmory hes turning in quest number 1, if u start bot again bot will only turn-in quest number 2 ( for bot he already finished the (turn-in quest n?1 part), and you are now with problems, you need manualy turn in

hope , u understand whant i mean with my poor english