[PB][N] 1-600 Herbalism & Mining - By Lbniese (Fully Automated!)

new to this , got to 300 , 300 herb and mining its going smooth for now , but some issues i noticed were right before it took off to blasted lands got stuck a few times in orgrimmar i adjusted it , then i ended up getting ganked soon as i took the portal - didnt run back and get its body ? idk howcome so then when i ressed it automatically picked up and went to the outlands and started flying off the map in hellfire like beneath the ravine i adjusted it then it started to work again hit 300,300 in both herb and mining - ill let you know if i see anything else strange when i start it up again , also note southern barrens took alot longer than it would but i let it run and it finally took off to felwood

 

It levels just fine, but when it goes to clear bags and AH at stormwind, it trains then goes thru Elwyn and farms the gray stuff when I have "Ignore gray nodes" set to true.

 

Please try to disable the Ignore Grey nodes feature (In Settings)

Well which faction are you? Post a log too. It should work..

 

]hi having a problem with this profile when it gets to the cape of stanglethorn part it fails to load and keeps trying to load in an infinite loop while my character jus flys around not collecting anything. log was too big to attach so im copy/pasting the error message....

Code:

[12:43:17.523 D] PB 1.536: Loading Profile :C:\Users\Laptop\Desktop\Honorbuddy_2.0.0.5883\Default Profiles\lbnieses-scripts\Profiles\Profession\Neutral - Mining & Herbalism 1-600\1-600 Mining & Herbalism - By Lbniese\Alliance\[GB2][A] 160-175 - Herbalism & Mining - Cape of Stranglethorn - by Lbniese.xml, previous profile was C:\Users\Laptop\Desktop\Honorbuddy_2.0.0.5883\Default Profiles\lbnieses-scripts\Profiles\Profession\Neutral - Mining & Herbalism 1-600\1-600 Mining & Herbalism - By Lbniese\Alliance\[GB2][A] 175-235 - Herbalism & Mining - Badlands - by Lbniese.xml
[12:43:17.523 N] Err: Unable to find profile: 1-600 Mining & Herbalism - By Lbniese\Alliance\[GB2][A] 160-175 - Herbalism & Mining - Cape of Stranglethorn - by Lbniese.xml
[12:43:17.625 D] PB 1.536: Loading Profile :C:\Users\Laptop\Desktop\Honorbuddy_2.0.0.5883\Default Profiles\lbnieses-scripts\Profiles\Profession\Neutral - Mining & Herbalism 1-600\1-600 Mining & Herbalism - By Lbniese\Alliance\[GB2][A] 160-175 - Herbalism & Mining - Cape of Stranglethorn - by Lbniese.xml, previous profile was C:\Users\Laptop\Desktop\Honorbuddy_2.0.0.5883\Default Profiles\lbnieses-scripts\Profiles\Profession\Neutral - Mining & Herbalism 1-600\1-600 Mining & Herbalism - By Lbniese\Alliance\[GB2][A] 175-235 - Herbalism & Mining - Badlands - by Lbniese.xml
[12:43:17.625 N] Err: Unable to find profile: 1-600 Mining & Herbalism - By Lbniese\Alliance\[GB2][A] 160-175 - Herbalism & Mining - Cape of Stranglethorn - by Lbniese.xml

EDIT: manually level herbing to 200 seems to have sorted the problem
uploaded smaller log file of issue

 

I'm actually very dissapointed in the mining part of these profiles. Herbalism went fine but when I tried to level up mining on it's own, it stays in zones where every node is green or grey while there are other zones available and when there are other zones on your profile list. Really sad.

 

Lbniese, well, I don't have a log now, but the fact is that Felwood definetely not for 235-275 level)

 

Hey. Starts the bot at 275

Run the bot!
Change the current profile on the level 1 - 91
Mine / Herb 1-600: Made by HighVoltz
Mine / Herb 1-600: Mining: True
Mine / Herb 1-600: Herb: True
Mine / Herb 1-600: Mining.Level: 276
Mine / Herb 1-600: Mining.MaxLevel: 375
Mine / Herb 1-600: Herbalism.Level: 276
Mine / Herb 1-600: Herbalism.MaxLevel: 375

In Explore Outland boat but there does not collect ore, grass and just flies to nowhere and it dies. What should you do?


Запускаю бота!
Меняю текущий профиль на [N][GB2] 300-350 - Herbalism and Mining - Outland - by Lbniese
Mine/Herb 1-600: Made by Lbniese
Mine/Herb 1-600: Mining: True
Mine/Herb 1-600: Herb: True
Mine/Herb 1-600: Mining.Level: 276
Mine/Herb 1-600: Mining.MaxLevel: 375
Mine/Herb 1-600: Herbalism.Level: 277
Mine/Herb 1-600: Herbalism.MaxLevel: 375

All the same, it flies to nowhere.

 

Даже я тебя не понял, напиши в личку что сказать то хотел)

 

im having a problem with the uldum profile it will be doing fine then all of a sudden dismount in mid air and die then after he goes to grave yard he will just very slowly go back to his body like not fluidly but stutter on the way back and move like an inch every 4 minutes im not even sure if he even finally gets back to his body because i get tired of watching it so i always disable the bot and then take him to the body my self

 

Well I'm happy to say that, as far as my bot is concerned, this works flawlessly now. Thanks for the fixes and tips.

 

I let this profile run an entire night with a lvl 85 toon with lvl 1 mining/herbalism.

I found it in the morning flying around in uldum with mining skill 5 and herbalism 4.

Any idea why is this happening?

 

well ikm only getting this
Changing current profile to level 0 - 2147483647
Starting the bot!
Changing current profile to level 0 - 2147483647
Objektreferensen har inte angetts till en instans av ett objekt.
Bot Stopped! Reason: Objektreferensen har inte angetts till en instans av ett objekt.


but im at lvl 350 on herb and mining fore the moment

 

I need logs from you guys.
@Kavlantis did you start the bot in your capital city?

 

yeap, in ogrimar, it wend out side, picked up 1-2 herbs and i thought it was ok, i turned the monitor off and went to bed

 

The bot refuses to kill mobs in the way, and because of that it pauses for long periods of time until the mob passes by before moving. D:

 

Overall the profession profiles seem great. However, I am experiencing an issue with the Herb/Mining. I have on 2 different toons, started at level 1 herb/miner and they both do great with the herbing, but stop getting mining nodes around 75. Last night, I started a lvl 39 toon at level 1 in both. This morning I woke up to it at 173 herb and 75 miner. Realized it didnt train for some reason in mining, so I manually trained. I try to get it to catch up but selecting the 50 - 120 profile and it auto changes it to the 1-300 and then just goes back to herbing.

Log File: View attachment 3892 2012-12-15 14.19.txt

Edit: so I thought I got it working again, by clearing cache, bringing toon back to orgrimmar. He went out got 2 more mining points, then decided to skip mining and now is at 77 mining and 226 herbing. I also noticed that he was getting stuck and dying in Northwatch Hold by guard's one shot, isn't that an alliance area?

Any thoughts?

 

System.IO.DirectoryNotFoundException: Finner ikke en del av banen C:\Users\Alex\Downloads\HB\Bots\professionbuddy\Localization\Strings.xml.
ved System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
ved System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFrom*****, Boolean useLongPath, Boolean checkHost)
ved System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize)
ved System.Xml.XmlDownloadManager.GetStream(Uri uri, ICredentials credentials, IWeb***** *****, RequestCachePolicy cachePolicy)
ved System.Xml.XmlUrlResolver.GetEntity(Uri absoluteUri, String role, Type ofObjectToReturn)
ved System.Xml.XmlTextReaderImpl.FinishInitUriString()
ved System.Xml.XmlTextReaderImpl..ctor(String uriStr, XmlReaderSettings settings, XmlParserContext context, XmlResolver uriResolver)
ved System.Xml.XmlReaderSettings.CreateReader(String inputUri, XmlParserContext inputContext)
ved System.Xml.XmlReader.Create(String inputUri, XmlReaderSettings settings, XmlParserContext inputContext)
ved System.Xml.Linq.XElement.Load(String uri, LoadOptions options)
ved System.Xml.Linq.XElement.Load(String uri)
ved HighVoltz.Professionbuddy.LoadStringsFromXml(String path) i c:\Users\Alex\Downloads\HB\Bots\professionbuddy\Professionbuddy\ProfessionBuddy.cs:linje 616
ved HighVoltz.Professionbuddy.LoadStrings() i c:\Users\Alex\Downloads\HB\Bots\professionbuddy\Professionbuddy\ProfessionBuddy.cs:linje 594
ved HighVoltz.Professionbuddy.Init() i c:\Users\Alex\Downloads\HB\Bots\professionbuddy\Professionbuddy\ProfessionBuddy.cs:linje 553
Err: System.Collections.Generic.KeyNotFoundException: Den angitte n?kkelen finnes ikke i ordlisten.
ved System.Collections.Generic.Dictionary`2.get_Item(TKey key)
ved HighVoltz.MainForm..ctor() i c:\Users\Alex\Downloads\HB\Bots\professionbuddy\Professionbuddy\MainForm.cs:linje 482

 

Overall this profile is pretty good but OP needs to remind people that if you do not have the portals open for Cata zones such as Deepholm and Uldum, the bot will just stop and unable to go on. If you've leveled from 80-85 questing, I'm sure you most likely have these cata zone portals open, but since I've grind to 90, I'll have to go back and open those portals

 

Is the SVN correct? I try to enter it and it says invalid..?

 

no download link, please link it.