[OrderBot][Crafting] Profiles for 35,40,70,80 Dur Recipes

== Profiles for 1,2-stars/Redscrips rotation(with Muscle Memory)===

This is the rotation which I am currently using now, it's similar to MAMK's rotation but this use Muscle Memory to start. Saves more time and works better!

See how this works:https://www.youtube.com/watch?v=ooYIIVWonP0

View attachment MM-1stars.xml
View attachment MM-2stars.xml
View attachment MM-60recipe-reds.xml

== Profiles for 1,2-stars/Redscrips rotation(with Maker's Mark)===
After I did some tests for specialist rotation, I realized although it is powerful sometime but it need lots of luck.

So I decided to make a new rotation which is more stable
idea from: https://www.youtube.com/watch?v=MsmNMy0tIhQ

Here is the profile: 2Stars Crafting
View attachment MAMK-2stars.xml
Don't have time to test it yet, but I definitely will do it later (all testers are welcome)(do not actually use 2star recipes for testing)

Required skills : Maker's Mark,Flawless Synthesis,Rapid Touch, Careful Synthesis II, Steady Hand II, Tricks of Trade, Byregot's Blessing, Comfort Zone, Hasty Touch
RequiredSkills="281,286,284,283,251,100178,100083, 100033,100069,100108,100098"

Required Craftsmanship: 690+
Required Control: 690+
Required CP: The one in video has 450cp, but 430+ should be just fine... (Use seafood stew)

Similar profile for 1Star crafting : View attachment MAMK-1stars.xml (Tested for seafood stew, Craftsmanship 698 Control:683 Cp:429(After use NQ Seafood stew) Start Quality 680 Tested times:100+ Result: over 80%HQ note: (Reclaim sometimes when situation is bad)

For lv60 recipes and Red Scrips Collectables View attachment MAMK-60recipe-reds.xml
(For this one you don't need Rapid Synthesis)
(Tested with lv60 GSM Craftsmanship 710 Control:650 Cp:410(After use Baked Onion Soup), recipe:Bladed Steel Jig_Collectable Start Quality:2024 Tested times:6 Result: All six hit 7851 Collectability(max) note: skipped Master's Mend since don't have enough CP (need 430?) )
Seems I have a new favorite rotation

for "CraftBuddy" template, I updated my profiles in template files also, you can download this zip and simply replace it

1.3:
Updated 1.4: Flawless Synthesis will now cast properly.

Updated 1.3: Fixed "60 recipes and Red Scrips" profile

Updated 1.2: Fixed some logical issues at "finishing phase"

Updated 1.1: Added reclaim to rotation. Although in this rotation you get (12*.8+(12*0.2)*2)*0.8=11.52 IQ stacks, there is still risks on it. So I added reclaim when the durability is below 40 and IQ stacks <9.

======== Profiles for Specialist rotation" ========

It's only a idea for specialist rotation, although some people think specialist skills are useless but I did saw it working powerfully in some videos.

Ok, here is the base for the rotation, I post this only for testing and it cannot be used for crafting yet.
View attachment specialisttest .xml
Skills required: Whistle while you work, Satisfaction, ToT. SHII, Comfort Zone. Manipulation
Basically, you start this rotation then you can sit and watch it rolling and rolling...

I tried to use this base and build a rotation for redscrip crafting (70dur 950difficulty)

MM:Muscle Memory WWYW:Whistle While You Work IQ:Inner Quiet PT: Precise Touch CSII: Careful Synthesis II HT: Hasty Touch GS: Great Strides BB: Byregot's Blessing

: MM--->CZ--->WWYW--->IQ--->
--->PTwhen is great/excellent, CSIIwhen is normal/poor(without SHII) , HTwhen is normal/poor(with SHII)
--->(GS--->BB--->last CSII) or (Reclaim--->HTHTHT)

Skills required: Whistle while you work, Satisfaction, ToT. SHII, Comfort Zone. Manipulation,Muscle Memory,Careful Synthesis II ,Reclaim)
View attachment specialist-redstip.xml


Also, I tried to build specialist rotation for 2-stars crafting. (idea from: https://www.youtube.com/watch?v=0yXCTWLt6JY)
Skills required: Whistle while you work, Satisfaction, ToT. SHII, Comfort Zone. Manipulation,Muscle Memory,Careful Synthesis II ,Rapid Synthesis ,Reclaim)
View attachment specialist-2stars.xml
Need to tested, although I am not plan to to do it now since it's really expensive... I will add another version with "The Heart of --------"


Great thanks to entrax for helping me fix error and check logic.
Also thank ExMatt for answering my many questions~

=======(OLD) Profiles for 35,40,70,80 Dur Recipes ============

Those profiles can be use for 35~40 durability, 70~80 durability crafting. unfortunately, you need to choose which profile to use by yourself base on your recipe lv.

What can they do:
Choose the appropriate time to use ToT
If you are higher than lv53, they will use Precise Touch if condition is good
When finishing, detect how many CPs you left and decide if use Innovation, Ingenuity.
When finishing, use Byregot's Blessing at best condition.
With some luck, Those rotations allow you maximize quality by using all NQ mats

They do not use HQ mats first, do not eat food automatically,. You can make them happen by adding some codes.

Skills Require:
Piece by Piece, Steady Hand II, Hasty Touch, Ingenuity II, Tricks of Trade, Careful Synthesis II, Comfort Zone, Waste Not II, Innovation
(If you are missing skills you cannot run it)

Ok, here is the first one: View attachment 35dur-40d.xml

Required CP: 414* Use both innovation and Ingenuity II and no GOOD condition(no precise touch and no ToT)
Usually you are able to run it with around 370CP (There is very low possibility that you may don't have enough CP to use BB)

If the recipe lv is too high and you need three CSII to finish, I replaced 1 Touch by 1 CSII. View attachment 35dur-40d - 3sy.xml


Another one in case you think the one above doesn't good enough for 40-dur recipes. This one has one more touch count.
View attachment 40DUR - 3SYN.xml
View attachment 40DUR.xml
Similar requirement except you need Waste Not, not Waste Not II


Here are the profile for 70-80 dur recipes:
Similar requirement as 35-40 one.

If you have a lv53 CUL, I also improved 70-80 with Muscle Memory, These rotations can let you get 11 stacks of Inner Quiet easily.
View attachment 70dur-80dur - MM - higher levell.xml
View attachment 70dur-80dur - MM - Same level.xml
View attachment 70dur-80dur - MM- - Lower level.xml
Skills Require:
Steady Hand II, Steady Hand, Hasty Touch, Ingenuity II, Tricks of Trade, Careful Synthesis II, Comfort Zone, Waste Not II, Innovation, Muscle Memory

Please decide which profile to run based on your recipe level. (for lower level one you don't need CSII)


REMEMBER: Change Recipe ID every times before you run it.
If you have over 400CP, you can change some UseBestTouch code into UseBestTouch2.

Create a folder named: "Custom" and put this file in it : View attachment CraftActionByNameTag.cs By: iyake

This is my first time to make profile, so I did lots of researches on forum. Many thanks to the people who gave me ideas.
If the bot is able to check crafting buffs condition in the future, I will continue improve my profiles

Thanks Cannibal for adding my profiles into his awesome plugin "CraftBuddy" templates.
You can view his plugin here:https://www.thebuddyforum.com/rebornbuddy-forum/plugins/224858-alpha-craftbuddy-craft-stock.html


1.2:
Improved some logic and added more skill requirement
Added same-level for Collectable ( This can be used for red scrip craft) View attachment 70dur-80dur - MM - Same level - Collectable.xml
1.1
Fixed: Changed the code for ToT so you don't get stuck after you cast Muscle Memory
New: Added scripts for Collectable, I am using it for blue and red scrips
Collectable: View attachment 70dur-80dur - MM- - Lower level - Collectable.xml

 

This looks pretty sweet, I haven't had time to test, but I did look at the profiles, can't wait to see if you have any good ideas for 1* and 2* profiles =)

 

Thank you ~ Give it a try and hoping it won't disappoint you

 

Newbie to the buddy scene. How do I figure out the recipe IDs for each item?

 

You look up the item on xivdb.com, then open the recipe page.. That's important, because the item id is different from the recipe id.. like this is a recipe page
http://xivdb.com/?recipe/31035/Adamantite-Mail-Of-Maiming
the number in the url is the recipe id.

And this is the item id http://xivdb.com/?item/10724/Adamantite-Mail-of-Maiming
So remember to go to the recipe page for whatever you want to craft before copy pasting the id number

 

Got this once I got it up and running

 

There is a easy way and you can check this out:

https://www.thebuddyforum.com/rebor...afting-recipe-ids-names.html?highlight=recipe

just replace the original 4 number ID into another 4 number ID you want to craft.

 

Yep. seems you installed ExMatt's files wrong. My profiles only have simple codes and you can run them with clean rb

 

Do you know how people are installing it to get the error shown above? I have been trying to support it but really can't duplicate it myself and none of my real-life friends that use my code have this issue.

 

I am using your plugin, too. It's great work and I didn't get any error either. I assume some people are likely to paste "plugin" folder under the root directory. ..

 

anyone has the attachement file for the custom folder? the link is not working...........

 

View attachment CraftActionByNameTag.cs This is not from this thread, but assuming he hasn't made any changes this should work the same

 

oh wow awesome , thank you

 

But..but .. it's mine !

I just noticed one thing by reading .cs from the OP.
There is no 50+ skill added, it's not an issue with your profile cuz PT is using through codechunck, but you can't use it with "CraftActionByName".

 

Sorry, I found this .cs from other's crafting thread but I wasn't sure about the source.
You are right, there is no 50+ skills in there, so I was using ActionID for all 50+ skills, hopefully it won't cause error...
BTW, I added the proper credit and thank you for your work!

 

Oh no, the real author isn't me it's iyake, like you I found it on this post this post, I was talking about the modified version posted by tishat.

 

Oh.. it's entirely possibly that I uploaded the wrong one.. I think I have a modified one somewhere.. Although I haven't yet made any profiles that really uses them.. was toying with 1 and 2 star profiles though.. those are fun.
And if craftactionbyname.cs wasn't even what was missing from the first post, then I've completely derped XD

 

Ah.. Still thank you for helping me found the author

 

It was missing.. I updated it after I saw your post

 

If these are the same ones in the CraftBuddy plugin. Using Waste Not and Manipulation is a complete waste of CP. Ideally you wanna just use Manipulation on 10 DUR left and then follow up with a reapplication of Steady Hand 2 or what not to recover back to 30/40 DUR.