Alchemy 1-600 by Antamansid Installation guide Just unpuck it somewhere, for example in Professionbuddy directory >Remember that (the profile Alchemy 1-600 and folder "Alchemy" should be in one folder ( I mean Bbbb\Alchemy 1-600 ; Bbbb\Alchemy\)< Gathebuddy bot setting >>> check all herbs, make mail recip 50 free !!!!!!!!NORMAL!!!!!!!! bag slots (Professionbuddy didn't support special bags for ores and herbs) MAKE SURE YOU HAVEN'T GOT "HEARTHSTONE AND EXIT" TICK IN GUTHERBUDDY Settings "AH items" - if there true, bot will AH all items, in which it not in need, for false it will mail all to your alt "Farm"-If true>>Farm all, False>>Take all mats form AH "Deepholm"-If you done quest line for Deepholm there should not be problems for you, but if not, make there False, and when there will be time to farm mats at Deepholm, bot will take all from AH. So What Bot can do? 1. It will farm the right herbs by itself (from AH or not) 1.1 If your skill Herbalism does not allow to collect herbs it need, it will up your skill by itself 1.2 It will check have you mats or not for recipe<<< If not => go farm or go to AH. 2. Ofc by this prof bot will train automaticaly 3. Will make the recipe (recipes specially chosen, there was no need to in the auction or in any duty farm rare reagents if function AH is off.) 4. Depending on the configuration will sell at auction / will send the results to your alt ... 5. You can start from any point, whether you have 400 alchemy and herbalism 1, or vice versa. 6. It is also a system for automatic delivery of the character at the right point from anywhere in the World of Warcraft. Sry for my engl Code: 1.34 -Пофиксил проблему с крафтом 60-105. Добавил условие в крафт, надеюсь Вайл сработает на 3 условия. -Пофиксил проблему с крафтом 60-105 убрал условие в другом крафте, мешающее апу профессии в определенных условиях 1.46 -Много исправлений. Очень много. В основном все связано с логистикой, выход на основную точку (стартовую) и продолжение работы профиля после СТОП-а или перерыва. Теперь если вы остановили работу бота, а через некоторое время запустили снова, при этом НЕ ПЕРЕДВИГАЛИ ПЕРСОНАЖА НА ДРУГИЕ КОНТИНЕНТЫ, он продолжит работу. Это связано с багрепортами по Аутленду, Нортренду... всеми континентами в общем, кроме Восточного Королевства и Калимдора (там зоны разбиты по профилям). Я не буду разбивать мегапрофили по минипрофилям, потому что это не рационально и затратно по времени. Пускай все соберет сразу, а потом перерабатывает в столице. 1.47 -Пофиксил баг с ясноткой. Теперь он не будет ее выкидывать на аукцион(посылать на альта) преждевременно. 26.03.2014 Я вернулся к тесту своего профиля, наконец настроив сполна свою систему, которая сейчас вполне работает без меня, но не в этом дело. Я пробегусь по вашим постам, но тем не менее тест провожу самостоятельно, просто внимательно слежу за кодом и ходом действий бота в определенных точках, где вы нашли ошибки. После определенной практики я понял, что искать ошибку в коде по вашим ссылкам это почти бесполезное дело... И не плодотворное. Это не означает что вам не следует выкладывать сюда свои багрепорты и предложения. Возможно это и не правильный подход, но именно Я хочу быть уверенным, что все функционирует на все 100%, и ошибка именно в коде, а не в ошибочной установке профиля у вас (что является странным, с установкой профиля справится даже мой пес). До скорой встречи. Ye and i think it is more Rationally to translate you through the translator my text, than I will translate him as my English is awful, and the translator takes words out of a context. View attachment Alchemy 1.47.zip View attachment Alchemy 1.46.zip View attachment Alchemy 1.34.zip View attachment Alchemy 1.32.zip View attachment Alchemy 1.21.zip View attachment Alchemy 1.23.zip View attachment Alchemy 1.30.zip View attachment Alchemy 1.5.zip View attachment Alchemy 1.0.zip For donations : https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=BWRYRXC2AQJY8
It is in archive and for me works fine. Maybe you moved "Alchemy 1-600" somewhere without folder "Alchemy" with herbs profiles. In a second report highlighted for you. I will realize AH soon, for now only farming.
Yes, I'm working on it. 1-300 is ready, but the project is likely to be paid (Or my profile is so perfect, or just no one is interested in it, 1st post). Upon completion I will look for some testers to test the profile. As long as I'm working hard on the implementation of the auction + a couple of features that the profile was as AFKable. After that, I finish with this, I will take all achievements to the engineer and finish it.
So far so good.. Just started it from level 1, so, we'll see what happens. Will post results later. Installation was a little confusing for me, since none was posted. For those who don't know what to do: Place "Alchemy 1-600" xml file into profession buddy > profiles. Place "Alchemy" Folder in Profession Buddy > Profiles Run GG
Alchemy up to BC works perfectly. After awhile it just gets stuck in Blade's Edge Stopped bot and did alchemy myself, started it back up again to do Northerand farming. Bot wouldn't go to Northerand or even farm when I put it in northerand myself. Just flew the same paths over and over, not doing much of anything. No log attached (deleted them all) Alchemy was 351
Same experience here. Even tried switching to AH mode, still went to blades edge and flew in circles.
1. What kind of stuck? Just got up and did not move? Perhaps the problem with the portal to Stormwind? Waiting for your messag. 2. Where you started your bot? Stormwind? Will Look at subrout to Northrend, but there may still "a problem with the return home." With "flew the same paths over and over" Had the same problem, fixed it by place ticks on herbs in setting of gutherbuddy. To Jonasx There is no AH mod in this version(it is just place herbs, that you not in need on AH, or mailing to your alt), it should be in the version that I wanted to lay out today, but now I will postpone the release to fixing problems with Northrend. Need to edit the first post, but hands do not reach
If f299 was having the same issue as me, which it sounds like he was, the profile just flies around in circles like it's looking for herbs but it never finds any.
Found the issue - in the GoHome Subroutine the coordinates were incorrect to go from outland to home Changed Code: <If Condition="Me.MapId == 530" IgnoreCanRun="True"> <If Condition="Me.IsHorde" IgnoreCanRun="True"> <FlyToAction Dismount="True" Location="1948.216, 5372.428, 12.42784"/> <MoveToAction Location="-1943.464, 5392.947, -12.42784" MoveType="Location" Pathing="ClickToMove" Entry="0"/> <MoveToAction Location="-1905.123, 5400.896, -12.42784" MoveType="Location" Pathing="ClickToMove" Entry="0"/> <MoveToAction Location="-1898.776, 5392.17, -12.42784" MoveType="Location" Pathing="ClickToMove" Entry="0"/> <InteractionAction InteractType="GameObject" Entry="183323" InteractDelay="2000" GameObjectType="Transport" SpellFocus="Anvil"/> </If> <If Condition="Me.IsAlliance" IgnoreCanRun="True"> <FlyToAction Dismount="True" Location="1948.216, 5372.428, 12.42784"/> <MoveToAction Location="-1943.464, 5392.947, -12.42784" MoveType="Location" Pathing="ClickToMove" Entry="0"/> <MoveToAction Location="-1905.123, 5400.896, -12.42784" MoveType="Location" Pathing="ClickToMove" Entry="0"/> <MoveToAction Location="-1893.625, 5388.385, -12.42784" MoveType="Location" Pathing="ClickToMove" Entry="0"/> <InteractionAction InteractType="GameObject" Entry="183325" InteractDelay="2000" GameObjectType="Transport" SpellFocus="Anvil"/> </If> to Code: <If Condition="Me.MapId == 530" IgnoreCanRun="True"> <If Condition="Me.IsHorde" IgnoreCanRun="True"> <FlyToAction Dismount="True" Location="-1948.216, 5372.428, -12.42784"/> <MoveToAction Location="-1943.464, 5392.947, -12.42784" MoveType="Location" Pathing="ClickToMove" Entry="0"/> <MoveToAction Location="-1905.123, 5400.896, -12.42784" MoveType="Location" Pathing="ClickToMove" Entry="0"/> <MoveToAction Location="-1898.776, 5392.17, -12.42784" MoveType="Location" Pathing="ClickToMove" Entry="0"/> <InteractionAction InteractType="GameObject" Entry="183323" InteractDelay="2000" GameObjectType="Transport" SpellFocus="Anvil"/> </If> <If Condition="Me.IsAlliance" IgnoreCanRun="True"> <FlyToAction Dismount="True" Location="-1948.216, 5372.428, -12.42784"/> <MoveToAction Location="-1943.464, 5392.947, -12.42784" MoveType="Location" Pathing="ClickToMove" Entry="0"/> <MoveToAction Location="-1905.123, 5400.896, -12.42784" MoveType="Location" Pathing="ClickToMove" Entry="0"/> <MoveToAction Location="-1893.625, 5388.385, -12.42784" MoveType="Location" Pathing="ClickToMove" Entry="0"/> <InteractionAction InteractType="GameObject" Entry="183325" InteractDelay="2000" GameObjectType="Transport" SpellFocus="Anvil"/> </If> Leaves outland now as it should, it was just a few missing "-" signs in the FlyToAction coordinates
Well, from step-by-step the bot did this: Started bot in Orgrimmar Bot did the training routine Bot Flew to Valley of Spirits, next to where the troll magic trainers are, landed, mounted ground mount Bot went to elevator, and just kept riding the elevator I moved the bot off the elevator and flew back out of Orgrimmar, towards Ashenvale I stopped bot, then put it on the zeppelin to Borean Tundra First round it just flew to Dalaran, and kept flying up, up, up, and up Second round it just flew randomly over Wintergrasp, then back to Dal, and continued to do so. I stopped the bot, leveled herb and alch manually, and started the bot again. It worked fine in cata and MOP Hope that helps. I know it doesn't do much without a log, but it was all deleted (my mistake!)
Had the same problem as others in Outland, flew around looking for herbs but didn't take any. Gave up and spendt 5k in AH to lvl the rest.
