Disable autoloading of profiles under Pet Zones. U didnt configure autoloading properly and u didnt turn it off either. Turn it off and it will load the profile u want.
Umm its how they came out in Generate hotspot I just copied and pasted. and I had it running to the spots under grindbot but it just tried to kill the crabs not pet fight them but will switch them around ty for the info
Ignore anything i wrote before and edited, i solved this issue runing HB as admin, any other workarounds i tried only caused the bot to fail sooner or later
U didnt write what u want to do and where... All i see is that the profile "G:\HB 1.2\Bots\Prosto_pet\PetZones\01-02 KALI (GrAir) Durotar (37 Hs,119 Pets) by Prostak.xml" couldnt be loaded.... Is the profile at that location? Does it load automatically or do u try to load it manually?
Anyone is able to make it work on pandaria? i can start it on orgri and he switches zones perfectly and goes wherever he needs depending on my options, but somehow i cant make it work at all on pandaria (assuming correct settings and correct pet levels etc), it just start for a second and then stops, and yes, i set a pandaria map exactly the same as i set the EK maps...
Asks password @ svn. It has prolly something to do with github. I made account there and didn't help at all.
Github will ask for a password if you're trying to push changes (as the repo is read only, this won't work.) Also if it can't access the repo (github problems) , it will assume permission problems. Same prompt for username/password in either case. Sounds like a temporary problem. If it comes up after a few hours, check the project website on github and see if there's changes /revisions that way. Sometimes it's just github maintenance, or you need to clean up the folder for changes, because it's too far away from the branch, so it cant sync properly. If you know svn, it's not too much work to fix. Otherwise, back up the Prosto pets folder with a zip file, delete and add the svn again. This should fix it up with a clean install. You can then unpack the backup, avoiding the overwrite files option, to get your custom profiles back in place.
Hi Prostak ! I am sure you Bot is amazing but i can't use it wright now ^^ Here is the message i have when i try to start it : [Pets] Alert: Profile with Hotspots Needed for Auto navigation. Current profile: ' ' How can i resolve it ? Is it caused because of my localization, i am playing the game in french. that said, if you want some help for translate it, i can help you, just tell me wich lines i have to change etc.. i know a bit of html,css, xml because i design websites so i am sure i can do this Thank you
Some issues I hope someone can answer I've updated by SVN. The process says "At revision: 46" However, when I choose to make settings in the bot, it clearly still states 0.9.16 (not the 0.9.3 that it apparently should). Is this just meaningless window dressing but the version is correct? Secondly, although it works fine on my Win7 boxes, on an Win 8.1 machine I cannot see (and therefore adjust) the "Min Pet Level" & "Max pet level" boxes. I see the words (same for the 2 boxes above them). They're just not there. THe bot runs fine but Ringer2 always chooses level 1s which is useless. I've deleted and reinstalled from scratch more than once. Again, everything runs fine on Win7 with SVN revision 46. I just don't know if revision 46 = 0.9.3 and I can't set the minimum level of the pets in Ringer2 (so it always takes level 1s and they almost always die). Any help or advice would be appreciated. If you want me to record and post logs, I can do that too if it's necessary. Thank you for this fine bot.
Been having a problem wherer the bot wont restart after stopping it. Needs a full restart to get it working again. Anyone else or any advice?
I'm fairly certain the author is either no longer, or not at this time, supporting this bot. That said, we all have the same problem. Depending on why you are stopping the bot, have you tried using the "Pause" instead of "Stop"? You can unpause and continue successfully, if that's sufficient for you. If pausing is not enough then you will need to quit HB and restart it.
The SVN isnt working, i ahd this but i deleted my HB to install a new clean version, now idk what to do for my pets u.u anyone mind uploading it?
Love This I love this, it works amazing if you play with the settings in the right way, i do have the issue that others have when stopping but a restart of HB is easy so i do not care. i have used this for hours today and leveled up to lvl18 on 3 pets without any issue. I know this may not be getting worked on now but if you want a pet bot this is great!! and working wonderfully at this date.
Maze, I totally agree and you forget to mention that for leveling an alt, it's brilliant @ 410kxp/hr, hour after hour, in a discrete, out of the way, mostly phased out mode. So you can level pets and level your alts all in one.
I had no idea there was a problem with the SVN still. I lazily assumed "all goes well" since there's no errors popping up. eh. here's an anonymouse hosted version. i've made a few changes to pet logic when i could, but i haven't gone into depth, or added the 6.2 pets. it does have the startup /shutdown problem as noted. and the quick fix but, you can close/reopen HB if needed. it will be hosted for a month, see how you go. *REMOVED FOR SECURITY* edit: you also get a bonus, untested pet profile for horde tanaan jungle in the pet reports section. which worked. kind of. File contents/av check here *REMOVED FOR SECURITY*
There's an issue with blacklisted pets. Like I have the corehound pup in my journal, but I can't summon it because I removed the authenticator. It still counts it when looking for a zone, though, so it stays in level 1 zones even though all of my pets (except the corehound) are 10+. Just set it to ignore blacklisted pet levels when checking zones.
