[Fly][A - Rep Quest] Wintersaber + Timbermaw Rep - Winterspring [Kick]

Hi kick! This profile was a beast!! It worked fawslessly! I think this is one of the best profiles i have used so far at HB. I ran it for about 15 hours with some stops and i just hitted exalted!! Thank you so much!

 

EXALTED WOOP WOOP.

-Gully

 

Which ones are you using? Mine completes the quest, hands it in, then just sits there.

 

B and C for 4265+

A for 4129

sometimes HB takes forever to pickup / turnin quests. give it some time (it's slow sometimes w/ repeatable quests)

 

So does mine I can't figure it out. It grabs the quests, does the quests, hands them in, gets them again, and then just sits there. I've tried all 3 and they all do that same exact thing.

 

give me logs

 

I got mine working, I redownloaded the profiles and now I am running on C with no issues at all!! Thanks for this I've wanted one of these mounts forever!

 

Don't understand how to get it working

Don't really understand how to make this profile work... I load it up, set HB to Questing mode and it loads my CC fine but then when I start it he jumps in the air in the middle of attempting to mount and then just sits there before bugging out. I can't tell if this is a CC issue or not (Jedi Hunter), though I can pvp bot just fine. Also could be because of where I have the cs file located? Not really sure where I should put it or if it matters. Attempting to use profile A btw.

 

i only support the newest version of HB.

you're using 4265. use 4317 or 4354

 

Worked, thanks!

 

This has worked flawlessly until i reached honored reputation.

I use the "B" version, and the latest HB. It says it should not do rampaging giants, but it sure does. Even when i open the xml file it has the quest programmed into it.
This is a HUUUUGE timesink and will probably make the grind take 2-3x as long.

I tried editing the quest out of there, but I'm not good enough to make it runnable.

Why is this happening? It states in the OP that the B-version excludes rampaging giants.
Could i get some help on what parts i should edit out?

Edit: Managed to solve it by editing out large portions of the profile. Works good now.

 

I keep getting

Exception thrown in CustomBehavior object for tag:
<CustomBehavior File="FlyTo" X="8067.484" Y="-3862.439" Z="763.0035" />
make sure the tag has all required attributes and try again.

I am not sure what is going on.

 

You must be doing it on a ground mount. The Rampaging Giants quest is worth 350 (vs 250 for each of the other two). Most sites that do the math with a flying mount indicate it is faster to include the Giants quest.

Make sure you are on HB-2.0.0.4245 with the shipped quest behaviors. I just got through using the profile on several toons, and it worked great. FlyTo only requires the X/Y/Z. The other two arguments it supports are optional.

cheers,
chinajade

 

ha ha I am stoopd. I forgot to update to newest version. working perfect now.

 

Nope, flying.

The problem is the respawnrate of the giants. It kills all but the last 1 or 2, then wait almost 10 minutes to complete it.

Same complaints on wowheads quest database from various players.

 

[05:37:15:739] Cleared POI - Reason Exception in Root.Tick()
[05:37:15:739] Cleared POI
[05:37:15:853] System.IO.FileNotFoundException: Could not load file or assembly 'Honorbuddy, Version=2.0.0.4265, Culture=neutral, PublicKeyToken=50a565ab5c01ae50' or one of its dependencies. The system cannot find the file specified.
File name: 'Honorbuddy, Version=2.0.0.4265, Culture=neutral, PublicKeyToken=50a565ab5c01ae50'
at Styx.Bot.Quest_Behaviors.FlyTo.<CreateBehavior>b__1(Object ret)
at TreeSharp.Action.RunAction(Object context)
at TreeSharp.Action.
.MoveNext()
at TreeSharp.Composite.Tick(Object context)
at QuestBot.Actions.ForcedBehaviorExecutor.
.MoveNext()
at TreeSharp.Composite.Tick(Object context)
at QuestBot.Actions.ForcedBehaviorExecutor.
.MoveNext()
at TreeSharp.Composite.Tick(Object context)
at TreeSharp.PrioritySelector.
.MoveNext()
at TreeSharp.Composite.Tick(Object context)
at TreeSharp.PrioritySelector.
.MoveNext()
at TreeSharp.Composite.Tick(Object context)
at Styx.Logic.BehaviorTree.TreeRoot.()

WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].

x 10000 pr minute..

character does not move.

 

HB-2.0.0.4345 (or newer), and use the shipped behaviors.

cheers,
chinajade

 

Kick when i run this profile i get this on the toolbox:
Honorbuddy stopped
Exception thrown in CustomBehavior object for tag:
<CustomBehavior File="RunMacro" Macro="/dismount\n/cancelaura Swift Flight Form\n/cancelaura Flight Form" NumOfTimes="1" WaitTime="2000" />
make sure the tag has all required attributes and try again.
Thread was being aborted.
Honorbuddy stopped
UseItemForAura - Questhelper - Version 1.0 Loaded.
I downloaded your QH and loaded them all, any thoughts?

 

You are using an outdated version of Honorbuddy. The profile works fine with a modern Honorbuddy and the shipped behaviors.

cheers,
chinajade

 

hey kick just wanted to say I hit exhaulted in I think 15 hours time a couple days ago. Great profile as always keep up the good work bro.