Having an issue with the quest "secret communication" in silithus, also happened with a couple other quests that have the same sort of format, I think the problem is that the quest giver says you can hand it in the minute you accept it, although you have no loot to hand in, hope i was clear enough, other than that good job! EDIT: Sorry about the previous statement it completed the quest once i think and then it just kept trying to hand it in due to it being a repeatable quest.
So 1-12 human it just sits at the first quest giver. I had to restart my honorbuddy during a quest line. How long does it take to know where it is at?
Just wanted to post a thanks, not sure if this is the correct area but regardless, i level using the quest profiles from 1-90 while babysitting it in 3 days and 11 hours total with full heirlooms and as it was a monk I used the zen pilgrimage experience bonus every 10 levels or so. Very impressed with the profile pack, keep up the good work!
BUG REPORT: Did not see it listed in the proper section. Where: LVL 9 Alliance warlock in Greymane manor outside of Gilneas city. Quest: Exodus He is supposed to go to coords 29.19 x 53.98 and board the carriage and leave the area. Instead he goes to the top tower in manor at 42.83 x 21.97 and sits there until it gets disconnected. This has happened to me on two other toons also.
Walking from Stormwind to Duskwood and flying back to Stormwind. Hey Folks, the toon is doin' this everytime, no matter if I've just relogged and restarted the WoW-Client and HB. I don't know what I'm doin' wrong and I hope you can help me with this problem. Things I have done to solve the problem: - Downloaded all meshes and put 'em into a new folder in the HB direction (set a link in HB to this direction) - Cleared the HB-cache Meanwhile the toon is an LvL 20 Nightelve Rogue trying to quest with the kickazz profil (1-58) Here is my log: Code: Honorbuddy v2.5.11034.745 started. Logging in... T: 5247086724931792954 H: 686881861 Attaching to D3D11 Attached to WoW with ID 5764 New bot added!: ArchaeologyBuddy New bot added!: BGBuddy New bot added!: Dungeonbuddy New bot added!: Gatherbuddy2 New bot added!: Grind Bot New bot added!: Questing New bot added!: Mixed Mode New bot added!: Party Bot New bot added!: [BETA] GrindBuddy New bot added!: Combat Bot New bot added!: ProfessionBuddy New bot added!: Raid Bot Honorbuddy v2.5.11034.745 started! Character is a level 20 NightElf Rogue Current zone is Elwynn Forest EnabledPlugins: RecentProfiles: Please wait a few seconds while Honorbuddy initializes. ItemForAura - Questhelper - Version 2.0 Loaded. Installed plugins Anti Drown - Enabled DrinkPotions - Disabled Questhelper - ItemForAura - Enabled Refreshment Detection - Enabled [Singular] Starting Singular v3.0.0.3502 [Singular] Installation: integrity verified for 3.0.0.3502 [Singular] GCD check fix spell set to: Sap [Singular] Determining talent spec. [Singular] Current spec is Rogue Combat [Singular] Your Level 20 Night Elf Combat Rogue Build is [Singular] ... running the Questing bot in Elwynn Forest [Singular] ... Zone: Eastern Kingdoms using my SOLO Behaviors [Singular] Initialization complete! BuddyMonitor has started up successfully. [BuddyMonitor] You have enabled BuddyMonitor but haven't entered your API key or your identifier yet! Open the configuration, set the values and restart HonorBuddy. Initialization complete. ItemForAura - Questhelper - Version 2.0 Loaded. Changing current profile to [A - Quest] EK 12-58 [Kick] ($Rev: 3322 $) Starting the bot! Currently Using BotBase : Questing [Singular] info: Pull Distance set to 100 yds by Questing, Plug-in, Profile, or User [MountHook-vUnknown(info)] Inserting hook [Profile Message]: Compiling Redridge Quests [MountHook-vUnknown(info)] Starting ground quest order. [Profile Message]: Compiling Alliance Mount [UseTransport-v1581(info)] Moving to wait location [Singular] info: Pull Distance set to 1 yds by Questing, Plug-in, Profile, or User Moving to Type: Fly, R: Use, Sturmwind, Elwynn Moving to Type: Fly, R: Use, Sturmwind, Elwynn Moving to Type: Fly, R: Use, Sturmwind, Elwynn Moving to Type: Fly, R: Use, Sturmwind, Elwynn Moving to Type: Fly, R: Use, Sturmwind, Elwynn Moving to Type: Fly, R: Use, Sturmwind, Elwynn Moving to Type: Fly, R: Use, Sturmwind, Elwynn Moving to Type: Fly, R: Use, Sturmwind, Elwynn Moving to Type: Fly, R: Use, Sturmwind, Elwynn Moving to Type: Fly, R: Use, Sturmwind, Elwynn Moving to Type: Fly, R: Use, Sturmwind, Elwynn Moving to Type: Fly, R: Use, Sturmwind, Elwynn TaxiMap is opened! Updating known nodes list. Taking flight path to Sturmwind, Elwynn from Holzfällerlager des Osttals, Elwynn [UseTransport-v1581(info)] Moving to wait location [UseTransport-v1581(info)] Moving to wait location Moving to Type: Hotspot, Loc: <-9941.796, -1703.43, 26.20845> Moving to Type: Hotspot, Loc: <-9941.796, -1703.43, 26.20845> Moving to Type: Hotspot, Loc: <-9941.796, -1703.43, 26.20845> Moving to Type: Hotspot, Loc: <-9941.796, -1703.43, 26.20845> Moving to Type: Hotspot, Loc: <-9941.796, -1703.43, 26.20845> Moving to Type: Hotspot, Loc: <-9941.796, -1703.43, 26.20845> Moving to Type: Hotspot, Loc: <-9941.796, -1703.43, 26.20845> Moving to Type: Hotspot, Loc: <-9941.796, -1703.43, 26.20845> Moving to Type: Hotspot, Loc: <-9941.796, -1703.43, 26.20845> Moving to Type: Hotspot, Loc: <-9941.796, -1703.43, 26.20845> Moving to Type: Hotspot, Loc: <-9941.796, -1703.43, 26.20845> Moving to Type: Hotspot, Loc: <-9941.796, -1703.43, 26.20845> Moving to Type: Hotspot, Loc: <-9941.796, -1703.43, 26.20845> Moving to Type: Hotspot, Loc: <-9941.796, -1703.43, 26.20845> Moving to Type: Hotspot, Loc: <-10050.72, -1367.473, 29.57896> Moving to Type: Hotspot, Loc: <-10070.77, -1130.143, 29.37626> [UseTransport-v1581(info)] Moving to wait location Moving to Type: Fly, R: Use, Stormwind, Elwynn Moving to Type: Fly, R: Use, Stormwind, Elwynn Moving to Type: Fly, R: Use, Stormwind, Elwynn Moving to Type: Fly, R: Use, Stormwind, Elwynn Moving to Type: Fly, R: Use, Stormwind, Elwynn Moving to Type: Fly, R: Use, Stormwind, Elwynn Moving to Type: Fly, R: Use, Stormwind, Elwynn Moving to Type: Fly, R: Use, Stormwind, Elwynn Moving to Type: Fly, R: Use, Stormwind, Elwynn Moving to Type: Fly, R: Use, Stormwind, Elwynn Moving to Type: Fly, R: Use, Stormwind, Elwynn Moving to Type: Fly, R: Use, Stormwind, Elwynn TaxiMap is opened! Updating known nodes list. Taking flight path to Stormwind, Elwynn from Darkshire, Duskwood [UseTransport-v1581(info)] Moving to wait location [UseTransport-v1581(info)] Moving to wait location Moving to Type: Hotspot, Loc: <-10070.77, -1130.143, 29.37626> Moving to Type: Hotspot, Loc: <-10070.77, -1130.143, 29.37626> Ignoring flight master Dungar Longdrink since we can't fully navigate to it. Moving to Type: Hotspot, Loc: <-10070.77, -1130.143, 29.37626> [UseTransport-v1581(info)] Moving to wait location Moving to Type: Hotspot, Loc: <-10070.77, -1130.143, 29.37626> Moving to Type: Hotspot, Loc: <-10070.77, -1130.143, 29.37626> This way it's always repeating itself. Thanks for your help.
it will auto load the next profile, but you can load whatever you want. they all load from capitol city (sw / org) if 0 quests have been completed for that profile need a log we changed the svn to assembla. use the new link need a log thx
i did them on 5 toons a few weeks ago and fixed a couple of issues ... they work perfect now. please attach a log
Hey why is that every time it picks up quests or take flight paths it'll dismount to pick them up? Mounts to quest giver > seems like it clicks on the quest giver twice to ensure that it has picked it up which is good, but the second time it usually dismounts before picking it up? It looks really bot-ish~ Fresh install.
Is it possible to somehow set it to be afk on 80-85 and 85-90? like in bc/lk ? as the profiles are seprate depending on the location, is it possible to combine them so it can be fully afk?
change all: <MoveTo <MoveTo Nav="Fly" make sure to add a space after the "Fly" save now this would work if i had moveto's everywhere... but i don't. So that's not going to work very well. You could possibly make a flying plugin that flew to all of your coords, but then you might get stuck flying above a cave that you have to walk into or something
you always need to attach a log. Please do not come in here and say 'my car won't start, fix it' without letting me run a diagnostic on it (ie: give me the log from your bot!) cheers
Quest : Needs a little lubrication (H) Problem : endlessly killed by raging ancients (sama goes for any quest around this big npc or any quest that needs to pass by). The bot decided to aggro nearby lesser mob and attacted raging ancient as well.
MountHook-vUnknown(info)] Inserting hook [Profile Message]: Compiling Eastern Plaguelands Quests [Profile Message]: Compiling Train 100 Speed Mount Function pls help me don`t working.. lv up..
Gets stuck at NPC Rally Zapnabber @outland/Blade's Edge Mountains. This happen before when I leveled my Warlock a couple weeks back.
hei man, got a prob with ur jade forest alliance quest profile, and ONLY the 85-86 Profile. Dont need to post a logfile i think, cause all others are running, and on this profile, it writes for hours, loading tiles, and the toon is running, but stopps every 2-5steps, pause, running 2-5steps.... tested the other profiles, no problem, doing like it should.... edith: given log also, first is the profile bugging, and 2ec is the flypoint profile...hope u find something....