HB ARCHIVES: Navigation/mesh errors and problems - POST THEM HERE!--DO NOT DELETE!

I know you don't support arena but In Nagrand arena they added the new ramp up the middle a LONG time ago. When using movement enabled CR's he does stupid things to avoid that ramp and run away and glitches out and what not trying to figure a path our n around. Can we get a re-mesh in there just for us movement users? Please and thank you

 

Hotspot inside building - Baradin Hold at Wardens Vigil

[Edited by Highvoltz on Dec 29, 2014] Hotspot is below buidling. Profile needs fixing
[HR][/HR]

View attachment 7772 2014-09-24 17.56.txt [00:48:56.598 D]
Changed POI to: Type: Hotspot, Loc: <-1502, 1308.333, 133.6046>
[00:48:56.643 N] Moving to Type: Hotspot, Loc: <-1502, 1308.333, 133.6046>


In Baradin Hold at Wardens Vigil using Kick's KickQuestProfiles\1-90 Questing Profile Pack\Reputation\Cata\A + H Tol Barad\[A - Rep Quest] TB Baradin Hold Dailies [Kick].xml The bot tries to go to this Hotspot but it is inside the building (no entrance). You can see this on about line 30200 of the attached log.

FYI - I sometimes interfere with the bot to force it to initiate combat it may not have done otherwise so if you see other errors in the log that may be the cause.

 

[Edited by Highvoltz on Dec 29, 2014] Can't reproduce
[HR][/HR]


Zangarmarsh, Orebor Harborage
[01:44:40.189 V] We are stuck! (<974.6609, 7422.324, 31.91455>)

Gets stuck inside this building and can't path out whenever interacting with the NPC inside

 

[Edited by Highvoltz on Dec 29, 2014] Not a mesh issue
[HR][/HR]
Tries to land in Shattrath to enter the World's End Tavern, lands about 30-40 yards away, in the same spot every time, but its too crowded and just sits on top of an object until afk's out, no antistuck.
Also, can't seem to find its way inside under mutliple attempts and hotspots. And the objects on the ground INSIDE the building it has trouble pathing around/through.
<Hotspot X="-1806.025" Y="5127.639" Z="-36.41806" />

 

Could not generate path

[Edited by Highvoltz on Dec 29, 2014] Hotspot is below buidling. Profile needs fixing
[HR][/HR]
Doing the dailies in Baradin Hold ("The Leftovers" specifically) and every time the bot gets up there it can't get down anymore and just waits.

Could not generate full path from {-1419.15, 1315.258, 133.6211} to {-1502, 1308.333, 133.6046} (time used: 296 milliseconds)

 

[Edited by Highvoltz on Dec 29, 2014] Not a mesh issue
[HR][/HR]


The bot don't start after i choose Hallow's ends event or any "the botanist" profile

View attachment 2616 2014-10-20 20.02.txt

 

I had the same thing but found that the Alliance side quest still had the Horde side quest ## in the script - the name is the same but the number is different. I fixed this and it worked just fine after that.

(To get the file to fix you'll need to get it from the SVN at the bottom of one of the first messages in the Kick's thread...)

 

[Edited by Highvoltz on Dec 29, 2014] Not a mesh issue
[HR][/HR]
Questing bot using Demonic and singular.

starts normal flies to shatt to get FP and all of that but as soon as it goes to the quest area and dismount WoW closes and HB shuts down.
here is the log from startup to crash. its happened with both singular and demonic using kicks 1-90 profile.

 

[Edited by Highvoltz on Dec 29, 2014] Fixed
[HR][/HR]


There is a mesh navigation point almost directly under the mailbox near the Alliance building in the Argent Tournament that usually causes multiple stucks. It is at the base of the steps and getting unstuck from the mailbos gets stuck under the steps - rinse, repeat. Putting a blackspot on the mailbox avoids this, but the bot then "goes around" using a circuitous route that looks real strange. As the bot approaches the CTM circle is about half under the mailbox.

<Mailbox X="8589.352" Y="697.2214" Z="547.2932" />

 

[Edited by Highvoltz on Dec 29, 2014] Fixed
[HR][/HR]

kick said within his thread we should post stucks here Link


Dreanor:

 

I guess u should read 1st post in this thread.

https://www.thebuddyforum.com/honor...n-mesh-errors-post-post350949.html#post350949

They need a screenshot also.

 

[Edited by Highvoltz on Dec 29, 2014] Believed to be a problem with the navigator using a previously generated path that was for another map and reportedly fixed by executing Navigator.Reset() after cutscene
[HR][/HR]

Having an issue on the Assault on the Dark Portal zone map (7025)

After quest 34741, at X="4524.091" Y="-2304.99" Z="33.51061", it will constantly try to walk back through a newly formed wall (triggered by completion of quest). MoveTo commands to areas away from the area work fine, but any attempt to interact with Khadgar at X="4610.563" Y="-2246.493" Z="15.40332" results in the bot trying to move back through the newly formed rock wall.

Attached photo is the wall that it tries to walk back through.

 

[Edited by Highvoltz on Dec 29, 2014] Fixed
[HR][/HR]

<Hotspot X="3077.918" Y="6175.792" Z="43.949" />

Nagrand by Lok-Rath. Tries to path up the little cliff and keeps failing by going all the way from left to right. Backs up and trys again, fails.

Grind bot. Singular no plugins

 

[Edited by Highvoltz on Dec 29, 2014] Fixed
[HR][/HR]


Spires of Arak in Draenor
<Hotspot X="-1103.192" Y="2299.883" Z="9.642374" />

The character runs through the wall to reach an NPC behind the building.
I chose the brewery.

Two different logs for two different situations.

 

Also experiencing various issues around outposts.

 

[Edited by Highvoltz on Dec 29, 2014] Not a mesh issue
[HR][/HR]

[07:27:27.720 D] System.Reflection.TargetInvocationException: Адресат вызова создал исключение. ---> System.IO.FileNotFoundException: Не удалось загрузить файл или сборку "GreyMagic.dll" либо одну из их зависимостей. Не найден указанный модуль.
в Styx.StyxWoW.get_WowExited()
в Styx.Helpers.GlobalSettings.set_SeperatedLogFolders(Boolean value)
--- Конец трассировки внутреннего стека исключений ---
в System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
в System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
в System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
в System.Reflection.RuntimePropertyInfo.SetValue(Object obj, Object value, BindingFlags invokeAttr, Binder binder, Object[] index, CultureInfo culture)
в System.Reflection.RuntimePropertyInfo.SetValue(Object obj, Object value, Object[] index)
в Styx.Helpers.Settings.InitializeDefaultValues()
в Styx.Helpers.Settings..ctor(String settingsPath, String oldSettingsPath)
в Styx.Helpers.GlobalSettings.()
в Honorbuddy.MainWindow..ctor()
[07:27:28.106 D] System.Reflection.TargetInvocationException: Адресат вызова создал исключение. ---> System.NullReferenceException: Ссылка на объект не указывает на экземпляр объекта.
в Honorbuddy.MainWindow.OnLogMessage(ReadOnlyCollection`1 messages)
--- Конец трассировки внутреннего стека исключений ---
в System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
в System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
в System.Reflection.RuntimeMethodInfo.UnsafeInvoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
в System.Delegate.DynamicInvokeImpl(Object[] args)
в System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Int32 numArgs)
в MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(Object source, Delegate method, Object args, Int32 numArgs, Delegate catchHandler)


HB it was updated and now it is started only this way, it is impossible to choose anything, there is no menu and simply black screen

 

[Edited by Highvoltz on Dec 29, 2014] Fixed
[HR][/HR]

There's a weird navigational issue in Mok'gol Watchpost in Nagrand around <Hotspot X="3457.594" Y="6869.511" Z="3.237111" />

When the bot moves from the stables on the right to the building on the left here, instead of just walking into the building it runs around behind the building and then inside every time. Looks very bot-like.

 

[Edited by Highvoltz on Dec 29, 2014] Navigation inside garrison is not supported that this time
[HR][/HR]

In the horde Garrison the quest Build Your Barracks has the bot running into the wall trying to get to the blueprints in Kick's 90-92 Horde profile. Mesh issues I would imagine but it can't figure it out and bombs it from continuing.

Draenor, loc: <6002.2, 5199.3, 131.674>

 

[Edited by Highvoltz on Dec 29, 2014] Fixed
[HR][/HR]

<HuntingGrounds WaypointVisitStrategy="Random" >
<Hotspot X="5352.38" Y="1595.557" Z="98.19318" />
<Hotspot X="6038.061" Y="547.1979" Z="19.70261" />
<Hotspot X="6018.18" Y="604.8837" Z="23.56316" />
<Hotspot X="6064.233" Y="497.809" Z="13.32908" />
<Hotspot X="6080.728" Y="572.6302" Z="25.24772" />
<Hotspot X="6067.377" Y="523.9913" Z="15.13927" />
<Hotspot X="6094.856" Y="603.6458" Z="26.58597" />
<Hotspot X="6031.535" Y="583.7969" Z="25.80789" />
</HuntingGrounds>


with error

Interacting with 真鐵礦床 (GameObject Id: 232544)
[InteractWith-v1857(debug)] Interact with '真鐵礦床' succeeded.
Blacklisting 283150A640E31800006AFD0002819273 for 00:03:00 [Type: Interact] - Reason: No reason specified. Caller: at Honorbuddy.QuestBehaviorCore.Extensions_WoWObject.BlacklistForInteracting(WoWObject wowObject, TimeSpan duration) in e:\下载\HonorbuddyCN 2.5.12203.759\Quest Behaviors\QuestBehaviorCore\Extensions\Extensions_WoWObject.cs:line 50

Could not generate path from {5543.873, 4512.67, 82.05252} to {5501.44, 4411.176, 93.89574} on map Draenor (Phase: FWHordeGarrisonLeve2new) (time used: 0 milliseconds) @ FindStartPoly
Activity: Moving to hunting ground waypoint 'Waypoint(<5501.44, 4411.176, 93.89574>)'
Could not generate path from {5543.873, 4512.67, 82.05252} to {5501.44, 4411.176, 93.89574} on map Draenor (Phase: FWHordeGarrisonLeve2new) (time used: 0 milliseconds) @ FindStartPoly
Could not generate path from {5543.847, 4512.717, 82.0529} to {5501.44, 4411.176, 93.89574} on map Draenor (Phase: FWHordeGarrisonLeve2new) (time used: 0 milliseconds) @ FindStartPoly
Could not generate path from {5543.692, 4512.591, 82.03442} to {5501.44, 4411.176, 93.89574} on map Draenor (Phase: FWHordeGarrisonLeve2new) (time used: 0 milliseconds) @ FindStartPoly
Could not generate path from {5543.649, 4512.615, 82.03442} to {5501.44, 4411.176, 93.89574} on map Draenor (Phase: FWHordeGarrisonLeve2new) (time used: 0 milliseconds) @ FindStartPoly
Could not generate path from {5543.497, 4512.576, 82.02108} to {5501.44, 4411.176, 93.89574} on map Draenor (Phase: FWHordeGarrisonLeve2new) (time used: 0 milliseconds) @ FindStartPoly
Could not generate path from {5543.487, 4512.556, 82.02108} to {5501.44, 4411.176, 93.89574} on map Draenor (Phase: FWHordeGarrisonLeve2new) (time used: 0 milliseconds) @ FindStartPoly
Could not generate path from {5543.487, 4512.556, 82.01903} to {5501.44, 4411.176, 93.89574} on map Draenor (Phase: FWHordeGarrisonLeve2new) (time used: 0 milliseconds) @ FindStartPoly
Could not generate path from {5543.488, 4512.56, 82.01936} to {5501.44, 4411.176, 93.89574} on map Draenor (Phase: FWHordeGarrisonLeve2new) (time used: 0 milliseconds) @ FindStartPoly
Could not generate path from {5543.477, 4512.805, 82.03599} to {5501.44, 4411.176, 93.89574} on map Draenor (Phase: FWHordeGarrisonLeve2new) (time used: 0 milliseconds) @ FindStartPoly
Stopping the bot!
Bot stopping! Reason: User pressed the stop button
Path search from {5543.477, 4512.805, 82.03599} to {5501.44, 4411.176, 93.89574} was aborted due to HB stopping (time used: 0 milliseconds)
Removed hook [Combat_Only] 753a6ab2-3ca8-4170-aef1-a1adc33b0c42
Removed hook [Death_Main] eb389b13-ef91-44db-b4c8-c7a3044b3fc4

 

[Edited by Highvoltz on Dec 29, 2014] Fixed
[HR][/HR]


I am attempting to write a script for the Highmaul raid and am wondering if it has been meshed yet, and if not is it planned any time soon?

Received error code from mesh server when attempting to get tile map for HighmaulOgreRaid: Server Exception
Failed to get tile map for HighmaulOgreRaid!
Could not change maps to HighmaulOgreRaid! Tilemap for one or more maps was invalid
Parameter name: maps
Received error code from mesh server when attempting to get tile map for HighmaulOgreRaid: Server Exception
Failed to get tile map for HighmaulOgreRaid!
Could not change maps to HighmaulOgreRaid! Tilemap for one or more maps was invalid
Parameter name: maps

Found workaround by starting bot outside of instance, would still like to know the mesh timeline though "soon"?