1) Never beta. Never. 2) "[20:47:41.879 N] [Singular-DEBUG] [CombatLog] SPELL_CAST_FAILED Hearthstone#8690 failure: 'Item is not ready yet'" Basically your hearth is on cooldown. A hearth on cooldown can't cast, resulting in a failed detection of the hearthstone casting.
Your path for the files/folders is too long. Max length of path is 248 chars, 260 with file included. Shorten the folder names leading up to my folder, or place it closer to your root directory
The hearthstone was only on CD because it used it the first run, doing the same thing. Hearthed home, showed me the "check your QB's or you don't have a hearthstone" If I run the individual files so far they're running fine. I started the dailies where I always start them, at the Shrine of the Seven Stars, its never hearthed home before.
Quest: Laosing Scouting I cant show you this prefect in a Picture or in the Logs, but they are attached. Toon goes near the Cage of Laosy. If there is a dead Mob, my Toon Targets this dead one and directly want to open the Cage so my Char is going left and right all the Time, doesnt open the Cage till the corpse of the dead one was despawned, looks weired. the movement is not like step left and step right, more like just a head left and right movement.
Hi Guys So I have been trying to get profile changer to work now for a week or two. I have followed the instructions and i have googled. The problem is that when I use [Rep] Daily Grind [Brodie].xml it hs back to orgrimmar. When i then start it again i tries to fly to portal but it flies like 10 yards then HB keeps on posting the message "Profile changer: Load profile" and then it flies 10 yeards again and post the same message. It keeps doing that until it gets to the portal. Then it use the portal and hs back and it all start over again. I really appritiate all help and ideas i can get. Thanks in advance.
Toon wants to pick up the Quest: A Helping Hand But doesnt move, just stay on this spot (Picture). Looks like i finished to Quest already. The Work Ordners are new? Never saw the Work orders for the other Faction at Trillers.
08:32:56.004 D] [QDBG] Starting behavior Bots.Quest.QuestOrder.ForcedCodeBehavior. [08:32:56.004 D] Goal: Dismounting [08:32:56.083 N] System.Data.SQLite.SQLiteException (0x80004005): Library used incorrectly library routine called out of sequence at System.Data.SQLite.SQLite3.Bind_Text(SQLiteStatement stmt, SQLiteConnectionFlags flags, Int32 index, String value) at System.Data.SQLite.SQLiteStatement.BindParameter(Int32 index, SQLiteParameter param) at System.Data.SQLite.SQLiteStatement.BindParameters() at System.Data.SQLite.SQLiteCommand.GetStatement(Int32 index) at System.Data.SQLite.SQLiteDataReader.NextResult() at System.Data.SQLite.SQLiteDataReader..ctor(SQLiteCommand cmd, CommandBehavior behave) at System.Data.SQLite.SQLiteCommand.ExecuteReader(CommandBehavior behavior) at System.Data.SQLite.SQLiteCommand.ExecuteReader() at ..() [08:32:56.857 D] [QDBG] Done with forced behavior Bots.Quest.QuestOrder.ForcedCodeBehavior. [08:32:56.857 D] [QDBG] Starting behavior Bots.Quest.QuestOrder.ForcedCodeBehavior. [08:32:56.857 D] Goal: Waiting for 05s of 05s [08:32:56.857 D] Activity: Wait time remaining... 05s... of 05s [08:32:56.928 N] System.Data.SQLite.SQLiteException (0x80004005): Library used incorrectly library routine called out of sequence at System.Data.SQLite.SQLite3.Bind_Text(SQLiteStatement stmt, SQLiteConnectionFlags flags, Int32 index, String value) at System.Data.SQLite.SQLiteStatement.BindParameter(Int32 index, SQLiteParameter param) at System.Data.SQLite.SQLiteStatement.BindParameters() at System.Data.SQLite.SQLiteCommand.GetStatement(Int32 index) at System.Data.SQLite.SQLiteDataReader.NextResult() at System.Data.SQLite.SQLiteDataReader..ctor(SQLiteCommand cmd, CommandBehavior behave) at System.Data.SQLite.SQLiteCommand.ExecuteReader(CommandBehavior behavior) at System.Data.SQLite.SQLiteCommand.ExecuteReader() at ..() [08:32:57.675 D] Goal: Waiting for 04s of 05s [08:32:57.675 D] Activity: Wait time remaining... 04s... of 05s [08:32:57.745 N] System.Data.SQLite.SQLiteException (0x80004005): Library used incorrectly library routine called out of sequence at System.Data.SQLite.SQLite3.Bind_Text(SQLiteStatement stmt, SQLiteConnectionFlags flags, Int32 index, String value) at System.Data.SQLite.SQLiteStatement.BindParameter(Int32 index, SQLiteParameter param) at System.Data.SQLite.SQLiteStatement.BindParameters() at System.Data.SQLite.SQLiteCommand.GetStatement(Int32 index) at System.Data.SQLite.SQLiteDataReader.NextResult() at System.Data.SQLite.SQLiteDataReader..ctor(SQLiteCommand cmd, CommandBehavior behave) at System.Data.SQLite.SQLiteCommand.ExecuteReader(CommandBehavior behavior) at System.Data.SQLite.SQLiteCommand.ExecuteReader() at ..() [08:32:58.490 D] Goal: Waiting for 03s of 05s [08:32:58.490 D] Activity: Wait time remaining... 03s... of 05s [08:32:58.561 N] System.Data.SQLite.SQLiteException (0x80004005): Library used incorrectly library routine called out of sequence at System.Data.SQLite.SQLite3.Bind_Text(SQLiteStatement stmt, SQLiteConnectionFlags flags, Int32 index, String value) at System.Data.SQLite.SQLiteStatement.BindParameter(Int32 index, SQLiteParameter param) at System.Data.SQLite.SQLiteStatement.BindParameters() at System.Data.SQLite.SQLiteCommand.GetStatement(Int32 index) at System.Data.SQLite.SQLiteDataReader.NextResult() at System.Data.SQLite.SQLiteDataReader..ctor(SQLiteCommand cmd, CommandBehavior behave) at System.Data.SQLite.SQLiteCommand.ExecuteReader(CommandBehavior behavior) at System.Data.SQLite.SQLiteCommand.ExecuteReader() at ..() [08:32:59.404 D] Goal: Waiting for 02s of 05s [08:32:59.404 D] Activity: Wait time remaining... 02s... of 05s [08:32:59.475 N] System.Data.SQLite.SQLiteException (0x80004005): Library used incorrectly library routine called out of sequence at System.Data.SQLite.SQLite3.Bind_Text(SQLiteStatement stmt, SQLiteConnectionFlags flags, Int32 index, String value) at System.Data.SQLite.SQLiteStatement.BindParameter(Int32 index, SQLiteParameter param) at System.Data.SQLite.SQLiteStatement.BindParameters() at System.Data.SQLite.SQLiteCommand.GetStatement(Int32 index) at System.Data.SQLite.SQLiteDataReader.NextResult() at System.Data.SQLite.SQLiteDataReader..ctor(SQLiteCommand cmd, CommandBehavior behave) at System.Data.SQLite.SQLiteCommand.ExecuteReader(CommandBehavior behavior) at System.Data.SQLite.SQLiteCommand.ExecuteReader() at ..() [08:33:00.171 D] Goal: Waiting for 01s of 05s [08:33:00.171 D] Activity: Wait time remaining... 01s... of 05s [08:33:00.242 N] System.Data.SQLite.SQLiteException (0x80004005): Library used incorrectly library routine called out of sequence at System.Data.SQLite.SQLite3.Bind_Text(SQLiteStatement stmt, SQLiteConnectionFlags flags, Int32 index, String value) at System.Data.SQLite.SQLiteStatement.BindParameter(Int32 index, SQLiteParameter param) at System.Data.SQLite.SQLiteStatement.BindParameters() at System.Data.SQLite.SQLiteCommand.GetStatement(Int32 index) at System.Data.SQLite.SQLiteDataReader.NextResult() at System.Data.SQLite.SQLiteDataReader..ctor(SQLiteCommand cmd, CommandBehavior behave) at System.Data.SQLite.SQLiteCommand.ExecuteReader(CommandBehavior behavior) at System.Data.SQLite.SQLiteCommand.ExecuteReader() at ..() [08:33:01.013 D] Goal: Waiting for 00s of 05s [08:33:01.013 D] Activity: Wait time remaining... 00s... of 05s [08:33:01.083 N] System.Data.SQLite.SQLiteException (0x80004005): Library used incorrectly library routine called out of sequence at System.Data.SQLite.SQLite3.Bind_Text(SQLiteStatement stmt, SQLiteConnectionFlags flags, Int32 index, String value) at System.Data.SQLite.SQLiteStatement.BindParameter(Int32 index, SQLiteParameter param) at System.Data.SQLite.SQLiteStatement.BindParameters() at System.Data.SQLite.SQLiteCommand.GetStatement(Int32 index) at System.Data.SQLite.SQLiteDataReader.NextResult() at System.Data.SQLite.SQLiteDataReader..ctor(SQLiteCommand cmd, CommandBehavior behave) at System.Data.SQLite.SQLiteCommand.ExecuteReader(CommandBehavior behavior) at System.Data.SQLite.SQLiteCommand.ExecuteReader() at ..() [08:33:02.594 D] [QDBG] Done with forced behavior Bots.Quest.QuestOrder.ForcedCodeBehavior. [08:33:02.665 N] System.Data.SQLite.SQLiteException (0x80004005): Library used incorrectly library routine called out of sequence at System.Data.SQLite.SQLite3.Bind_Text(SQLiteStatement stmt, SQLiteConnectionFlags flags, Int32 index, String value) at System.Data.SQLite.SQLiteStatement.BindParameter(Int32 index, SQLiteParameter param) at System.Data.SQLite.SQLiteStatement.BindParameters() at System.Data.SQLite.SQLiteCommand.GetStatement(Int32 index) at System.Data.SQLite.SQLiteDataReader.NextResult() at System.Data.SQLite.SQLiteDataReader..ctor(SQLiteCommand cmd, CommandBehavior behave) at System.Data.SQLite.SQLiteCommand.ExecuteReader(CommandBehavior behavior) at System.Data.SQLite.SQLiteCommand.ExecuteReader() at ..() [08:33:03.487 D] [QDBG] Done with forced behavior Bots.Quest.QuestOrder.ForcedIf. [08:33:03.487 D] [QDBG] Starting behavior Bots.Quest.QuestOrder.ForcedCodeBehavior. [08:33:03.487 N] [Profile Message]: Beginning Golden Lotus Quests. [08:33:03.487 D] [QDBG] Done with forced behavior Bots.Quest.QuestOrder.ForcedCodeBehavior. [08:33:03.487 D] [QDBG] Starting behavior Bots.Quest.QuestOrder.ForcedCodeBehavior. [08:33:03.487 N] [Profile Message]: Starting/Checking Phase 1... [08:33:03.487 D] [QDBG] Done with forced behavior Bots.Quest.QuestOrder.ForcedCodeBehavior. [08:33:03.487 D] [QDBG] Starting behavior Bots.Quest.QuestOrder.ForcedIf. [08:33:03.500 N] Could not find quest giver NPC with ID 58408 in database. [08:33:03.500 D] Stop called! [08:33:03.500 Q] Bot Stopped! Reason: Could not create current in quest bot! [08:33:03.514 D] Активность: Honorbuddy остановлен [08:33:04.539 D] System.Threading.ThreadAbortException: Thread was being aborted. at Styx.CommonBot.TreeRoot.() at Styx.CommonBot.TreeRoot.() [08:33:04.542 D] System.Threading.ThreadAbortException: Thread was being aborted. at Styx.CommonBot.TreeRoot.() [08:33:04.539 D] System.Threading.ThreadAbortException: Thread was being aborted. at Styx.CommonBot.TreeRoot.() at Styx.CommonBot.TreeRoot.() [08:33:04.542 D] System.Threading.ThreadAbortException: Thread was being aborted. at Styx.CommonBot.TreeRoot.() Here is full log View attachment 4480 2013-04-20 12.17.txt
i have the same issue... and i`ve done everything by the book. View attachment 6624 2013-04-20 11.21.txt
Hi there...But what happened to ur profile brodie? It worked really good till few weeks ago but now i don't understand why it seems bad.. For example when i'm questing on Isle of thunder i have to supervise the profile due to many bullshit it does :| Also are more times it dies than those it's alive. I didn't want be rude just i found the profile is going bad... This post doesn't have flame intent or something like that,just i'd like to know what's changed. Also is possible that a char casts common (like shield,frost barrage for example being me a mage) spell before entering under the bubble?because it wastes a lot of time to spam "you cannot do this while silenced"... Edit: Another problem on GL daily View attachment 6184 2013-04-20 12.12.txt
Its not Brodie's profile. the .557 honorbuddy release changed a lot of bot behaviors, and almost all for the worse. Kick's 1-90 profile is so broken now its hardly worth using and brodie's profile is suffering the same. The bot will just run after 1 target with 5 beating on it now for no reason, it'll get hung up trying to interact with an object it can't touch for some reason while being killed by a lower level mob hitting it. Its not the profile, the system itself isn't working well right now.
That explains alot!! Thanks, then we hope for an update on HB i guess? Or is there an enourmous job going on with all the profiles???
Is it possible to force my druid not to use flight form just normal fly mount? I ask that i have some quests where it can't be completed in flight form..
Hi, Evialtah, and thank you for the log. In the future, the cut-n-paste stuff is unnecessary, the log is everything we need. SQLLite errors are an indication of a damaged Honorbuddy installation. You will need to do a clean install to repair the issue. You can find the instructions here: HelpDesk: "Clean installing" Honorbuddy cheers, chinajade
HI, Squid_84, Honorbuddy .557 did change the way Quest Behaviors are handled internally, which caused a little bit of scrambling for everyone. Everyone is slaving away to put things right again. We did fail to a priori communicate the changes coming to profile authors that also supplied behaviors. This notice was our belated recovery from that faux pas: For those with 'quest behavior' issues with the .557 drop... However, the problems Digitalmocking is attributing to these changes is incorrect. There is something else going wrong for him (and probably you). If you need help, please make a post into the Support forum and attach your log that shows whatever problem you're having. Ref: [Guide] How to attach your log For the .557 drop, it is simply wrong to do an 'upgrade install' due to the changes made internally to Honorbuddy. Doing a 'clean install' clears the problems right up. You can find more info about it all here: HelpDesk: "Clean installing" Honorbuddy cheers, chinajade
[InteractWith-v453(fatal)]: [PROFILE ERROR] Range(2) must be at least 3 greater than MinRange(0). Fatal error. Stopping Honorbuddy. Quest: Born Free
Hi, Godguygregg, Aye, that error has been repaired in the latest InteractWith available in Kick's repository. cheers, chinajade
Hi, Ninjaskija, This isn't a profile problem, and really should be asked in the Honorbuddy general forum. The only possibility you have is: Honorbuddy -> "Settings & Tools" -> uncheck "Find Mounts Automatically" -> uncheck "Use Random Mount" -> hard code a value into "Flying Mount Name" Even with this, I believe HBcore may have special code for druids, that disallow them from using anything other than flight form. You'll just have to try it and see. More information is available here: HelpDesk: Honorbuddy is not using, or changing, my selected mount cheers, chinajade