As for disc priest you only get stuck at 1 point, I will post a log later, if you monitor it you should be fine. I am on 6093/21000 towards exalted now.
hello, Hopin you can help me! its not working for some reason I set the bot on Grid Bot and choose the profile you gave us and it is not working bot just standing still ;(
Have been using this on a Level 70 character (prot paladin) to grind sha'tari rep. I was using Kicks questing profile but it was no good at all. Had one error because the minimum level is set to 75 (when set to 70, works fine), and has been grinding everything fine (mini bosses all killed ok), but I tend to stop it and get outside help for Terrokk as its abit too much for me. I died two times to him and obviously you have to start over again, so just a warning if you are lower than normal level. A fantastic profile for all users, I can highly recommend this to anyone looking for this faction. Great job panyama, and please keep us going with profiles as good as this
Use it with this plugin it boosts the rep alot http://www.thebuddyforum.com/honorb...d/24731-plugin-shatari-helper.html#post499274
Like a lot of other people, Skips a lot of mobs, no log cause obviously it thinks everything is ok, i even checked kill between hotspots and still not killing much. Also after honored the little birds no longer give rep. Anyway to skip the little birds while revered?
Trying to start this profile I'm over at Blackwind Lake but its saying it can't generate a path to the starting point. @ FindEndPoly [3:59:14 AM:064] Could not generate path from {-4033.287, 3349.168, 291.0598} to {8170.056, 2109.623, 499.7374} (time used: 0 milliseconds) @ FindEndPoly [3:59:14 AM:200] Could not generate path from {-4035.975, 3345.893, 291.5163} to {8170.056, 2109.623, 499.7374} (time used: 0 milliseconds) @ FindEndPoly [3:59:14 AM:302] Could not generate path from {-4037.934, 3343.477, 291.8334} to {8170.056, 2109.623, 499.7374} (time used: 0 milliseconds) @ FindEndPoly [3:59:14 AM:396] Could not generate path from {-4039.899, 3341.027, 292.1469} to {8170.056, 2109.623, 499.7374} (time used: 0 milliseconds) @ FindEndPoly [3:59:14 AM:498] Could not generate path from {-4041.854, 3338.567, 292.4522} to {8170.056, 2109.623, 499.7374} (time used: 0 milliseconds) @ FindEndPoly [3:59:14 AM:597] Could not generate path from {-4043.796, 3336.096, 292.7547} to {8170.056, 2109.623, 499.7374} (time used: 0 milliseconds) @ FindEndPoly [3:59:14 AM:698] Could not generate path from {-4045.724, 3333.614, 293.0518} to {8170.056, 2109.623, 499.7374} (time used: 0 milliseconds) @ FindEndPoly [3:59:14 AM:797] Could not generate path from {-4047.651, 3331.131, 293.3489} to {8170.056, 2109.623, 499.7374} (time used: 0 milliseconds) @ FindEndPoly [3:59:14 AM:897] Could not generate path from {-4049.576, 3328.657, 293.6382} to {8170.056, 2109.623, 499.7374} (time used: 0 milliseconds) @ FindEndPoly [3:59:14 AM:996] Could not generate path from {-4052.698, 3328.234, 293.8425} to {8170.056, 2109.623, 499.7374} (time used: 0 milliseconds) @ FindEndPoly [3:59:15 AM:100] Could not generate path from {-4055.816, 3327.782, 294.0399} to {8170.056, 2109.623, 499.7374} (time used: 0 milliseconds) @ FindEndPoly [3:59:15 AM:197] Could not generate path from {-4058.926, 3327.27, 294.2257} to {8170.056, 2109.623, 499.7374} (time used: 0 milliseconds) @ FindEndPoly [3:59:15 AM:296] Could not generate path from {-4062.027, 3326.702, 294.4018} to {8170.056, 2109.623, 499.7374} (time used: 0 milliseconds) @ FindEndPoly [3:59:15 AM:400] Could not generate path from {-4065.119, 3326.087, 294.5672} to {8170.056, 2109.623, 499.7374} (time used: 0 milliseconds) @ FindEndPoly [3:59:15 AM:518] Could not generate path from {-4068.699, 3325.34, 294.7531} to {8170.056, 2109.623, 499.7374} (time used: 0 milliseconds) @ FindEndPoly [3:59:15 AM:613] Could not generate path from {-4071.781, 3324.674, 294.9107} to {8170.056, 2109.623, 499.7374} (time used: 0 milliseconds) @ FindEndPoly [3:59:15 AM:713] Could not generate path from {-4073.958, 3322.66, 295.103} to {8170.056, 2109.623, 499.7374} (time used: 0 milliseconds) @ FindEndPoly [3:59:15 AM:814] Could not generate path from {-4075.636, 3319.993, 295.308} to {8170.056, 2109.623, 499.7374} (time used: 0 milliseconds) @ FindEndPoly [3:59:15 AM:917] Could not generate path from {-4077.314, 3317.326, 295.5062} to {8170.056, 2109.623, 499.7374} (time used: 0 milliseconds) @ FindEndPoly [3:59:16 AM:013] Could not generate path from {-4078.656, 3315.172, 295.657} to {8170.056, 2109.623, 499.7374} (time used: 0 milliseconds) @ FindEndPoly [3:59:16 AM:117] Could not generate path from {-4078.481, 3315.583, 295.638} to {8170.056, 2109.623, 499.7374} (time used: 0 milliseconds) @ FindEndPoly [3:59:16 AM:218] Could not generate path from {-4078.498, 3316.027, 295.6204} to {8170.056, 2109.623, 499.7374} (time used: 0 milliseconds) @ FindEndPoly [3:59:16 AM:317] Could not generate path from {-4076.299, 3317.436, 295.6204} to {8170.056, 2109.623, 499.7374} (time used: 0 milliseconds) @ FindEndPoly [3:59:16 AM:417] Could not generate path from {-4073.932, 3319.524, 295.6204} to {8170.056, 2109.623, 499.7374} (time used: 0 milliseconds) @ FindEndPoly [3:59:16 AM:515] Could not generate path from {-4071.787, 3321.88, 295.6204} to {8170.056, 2109.623, 499.7374} (time used: 0 milliseconds) @ FindEndPoly [3:59:16 AM:615] Could not generate path from {-4070.009, 3324.485, 295.6204} to {8170.056, 2109.623, 499.7374} (time used: 0 milliseconds) @ FindEndPoly [3:59:16 AM:718] Could not generate path from {-4068.574, 3327.295, 295.6204} to {8170.056, 2109.623, 499.7374} (time used: 0 milliseconds) @ FindEndPoly [3:59:16 AM:816] Could not generate path from {-4067.542, 3330.241, 295.6204} to {8170.056, 2109.623, 499.7374} (time used: 0 milliseconds) @ FindEndPoly [3:59:16 AM:922] Could not generate path from {-4067.095, 3333.927, 295.6204} to {8170.056, 2109.623, 499.7374} (time used: 0 milliseconds) @ FindEndPoly [3:59:17 AM:015] Could not generate path from {-4067.377, 3336.531, 295.6204} to {8170.056, 2109.623, 499.7374} (time used: 0 milliseconds) @ FindEndPoly [3:59:17 AM:115] Could not generate path from {-4067.895, 3339.645, 295.6204} to {8170.056, 2109.623, 499.7374} (time used: 0 milliseconds) @ FindEndPoly [3:59:17 AM:269] Could not generate path from {-4065.1, 3341.158, 295.3869} to {8170.056, 2109.623, 499.7374} (time used: 0 milliseconds) @ FindEndPoly [3:59:17 AM:366] Could not generate path from {-4062.84, 3342.469, 295.1949} to {8170.056, 2109.623, 499.7374} (time used: 0 milliseconds) @ FindEndPoly [3:59:17 AM:465] Could not generate path from {-4060.143, 3344.032, 294.966} to {8170.056, 2109.623, 499.7374} (time used: 0 milliseconds) @ FindEndPoly [3:59:17 AM:567] Could not generate path from {-4057.419, 3345.611, 294.7348} to {8170.056, 2109.623, 499.7374} (time used: 0 milliseconds) @ FindEndPoly [3:59:17 AM:798] Could not generate path from {-4051.045, 3349.307, 294.1937} to {8170.056, 2109.623, 499.7374} (time used: 0 milliseconds) @ FindEndPoly [3:59:17 AM:899] Could not generate path from {-4048.322, 3350.886, 293.9625} to {8170.056, 2109.623, 499.7374} (time used: 0 milliseconds) @ FindEndPoly [3:59:17 AM:998] Could not generate path from {-4045.598, 3352.465, 293.7313} to {8170.056, 2109.623, 499.7374} (time used: 0 milliseconds) @ FindEndPoly [3:59:18 AM:097] Could not generate path from {-4042.874, 3354.044, 293.5} to {8170.056, 2109.623, 499.7374} (time used: 0 milliseconds) @ FindEndPoly [3:59:18 AM:204] Could not generate path from {-4039.631, 3355.752, 293.0767} to {8170.056, 2109.623, 499.7374} (time used: 0 milliseconds) @ FindEndPoly [3:59:18 AM:298] Could not generate path from {-4037.22, 3356.554, 292.4528} to {8170.056, 2109.623, 499.7374} (time used: 0 milliseconds) @ FindEndPoly [3:59:18 AM:396] Could not generate path from {-4034.278, 3357.15, 291.4795} to {8170.056, 2109.623, 499.7374} (time used: 0 milliseconds) @ FindEndPoly So I'm not even sure what is going on as it should be exactly where it needs to be...
next time attach a log or i'll ignore your message. check guides how to attach a log. you should press start at the landing point where the npcs are at.
well the problem was that in your original post you just said a area not at the NPC's I did a wowhead search and couldn't locate the area so I was unable to actually get to the specified area.
Ran it for 10 mins while waiting for a queue and so far it seems to work great. A few odd spins here and there as far as movement goes but I'll happily use it to Exalted! +rep
Location: Outland - Blackwing Landing (start here) Should be Location: Outland - Blackwind Landing (start here) Was wondering why i couldn't find it Profile works as advertised. I changed it to a questing one and made it hand in dusts aswell, every bit of rep helps. Will post it once i get to exalted with it to make sure. Thanks for the profile, nothing left to do on my toons but get all the reps to exalted so appreciate it
Made Neutral to Exalted in about 18 Hours, Needed a little babysit, had trouble vendoring items and would get stuck at the vendor. Log is gone so i cant help there. But great bot, skipped some mobs but its better then doing it yourself. Thanks panyama!
Yep this was confusing. Check this link for the location Sky Sergeant Doryn - NPC - World of Warcraft
This doesn't work for me, not as a resto nor as a enh shaman, it runs around mobs, doesnt attack them. Then it runs into the lake and is just swimming around, back and forth, the entire time.