[Test] Honorbuddy 2.0.0.3408 - Updated for 4.0.3.13329

Ok bots works great so far. Only done grinding in northrend but without problems. However BG's just don't work. It ques for AV and it does enter but that's about all it does. It came to a point that i was moving around myself and had to support it in a fight because it just went on spamming moving to hotspot. Never had this before with other versions but have it now.

Used the mixed version first with default AV profile and ShamWoW CC. then afther not moving i shut it down and restarted HD in pvp mode but still nothing.

ps. had to really cut into the logg to make the filesize small enough so only the last 30% of the log is in it but that should also show enough info i hope.

 

Apoc, I don't know if its recent or not, but my bot was doing fine until I told it to go to SW and train, then it flipped out on me.

check the below log. I flew it to SW manually (it wouldn't get on the fp at lakeshire) and it still gave me cryptography errors.

Code:

[8:42:10 AM:59] Changing current profile to 3 Corners (Redridge) 13-15
[8:42:10 AM:494] Downloaded tilemap Azeroth
[8:42:10 AM:741] Chose Convalesce Advanced 4.1 Beta 2 by Mord as your combat class!
[8:42:10 AM:933] Cleared POI
[8:42:12 AM:309] Activity: Moving to hotspot
[8:42:13 AM:922] Downloaded Azeroth_31_48
[8:42:14 AM:17] System.Security.Cryptography.CryptographicException: Padding is invalid and cannot be removed.
at System.Security.Cryptography.RijndaelManagedTransform.DecryptData(Byte[] inputBuffer, Int32 inputOffset, Int32 inputCount, Byte[]& outputBuffer, Int32 outputOffset, PaddingMode paddingMode, Boolean fLast)
at System.Security.Cryptography.RijndaelManagedTransform.TransformFinalBlock(Byte[] inputBuffer, Int32 inputOffset, Int32 inputCount)
at System.Security.Cryptography.CryptoStream.FlushFinalBlock()
at System.Security.Cryptography.CryptoStream.Dispose(Boolean disposing)
at System.IO.Stream.Close()
at System.IO.Stream.Dispose()
at a6.a(Byte[] A_0, Byte[] A_1, Byte[] A_2)
at ce.a(TileIdentifier A_0)
at Tripper.Navigation.WowNavigator.LoadTile(TileIdentifier wowTile)
at Tripper.Navigation.WowNavigator.FindPath(Vector3 start, Vector3 end)
at Styx.Logic.Pathing.MeshNavigator.MoveTo(WoWPoint location)
at Styx.Logic.Pathing.Navigator.MoveTo(WoWPoint location)
at Bots.Grind.LevelBot.df(Object A_0)
at TreeSharp.Action.RunAction(Object context)
at TreeSharp.Action.a.a()
at TreeSharp.Composite.Tick(Object context)
at TreeSharp.Decorator.a.a()
at TreeSharp.Composite.Tick(Object context)
at TreeSharp.Decorator.a.a()
at TreeSharp.Composite.Tick(Object context)
at TreeSharp.PrioritySelector.a.b()
at TreeSharp.Composite.Tick(Object context)
at TreeSharp.PrioritySelector.a.b()
at TreeSharp.Composite.Tick(Object context)
at Styx.Logic.BehaviorTree.TreeRoot.b()
[8:42:14 AM:17] Cleared POI

log attached of course

yes, i deleted my azeroth mesh folder before I made this log

update1: I even made a "go to goldshire and train.xml" just so it could train and it still gave me the errors

update2: I trained, and its still giving me the errors.

update3: I moved it back to the area that I wanted it to kill stuff in... It will defend itself w/ the CC, but it's not wanting to move all, just spamming that error down the log. It will also not loot.

update4: I removed trainers, vendors, mailing, target min/max, from profile and it has no effect

Note: It was going back and forth to trainers until it hit level 14, then hb2 just spazzed out w/ these errors. Paladin if it matters

QQ

I also tried a new install

As a side note -- bc and LK seem unaffected by this

 

Having a problem that says; The type initializer for 'IoC' threw an exception.

 

New issue here: Invalid Parameter bei SevenZip.Compression

I used HB for the last 2 hours.
Then I pressed stop and start again (nothing else)
Now, the debug log throws

Code:

[10:18:54:438] h: Invalid Parameter
   bei SevenZip.Compression.LZMA.Decoder.SetDecoderProperties(Byte[] properties)

I hope, I did everything right with the logfile. It is the first time I attach a file.

 

I was testing RAF - Combat Assist mode,
first everything worked greate. Then i switched over to grinding for an hour and than back to RAF an got the following error:

Code:

[10:35:50:980] Cleared POI
[10:35:51:96] System.InvalidOperationException: Cannot read a descriptor on an invalid object.
   bei Styx.WoWInternals.WoWObjects.WoWObject.GetStorageField[T](UInt32 field)
   bei Styx.WoWInternals.WoWObjects.WoWUnit.GetStorageField[T](bd field)
   bei Styx.WoWInternals.WoWObjects.WoWUnit.get_CurrentTargetGuid()
   bei Styx.WoWInternals.WoWObjects.WoWUnit.get_CurrentTarget()
   bei Styx.WoWInternals.WoWObjects.WoWUnit.get_GotTarget()
   bei Bots.CombatAssist.CombatAssist.d.e(Object A_0)
   bei TreeSharp.Decorator.CanRun(Object context)
   bei TreeSharp.Decorator.a.a()
   bei TreeSharp.Composite.Tick(Object context)
   bei TreeSharp.PrioritySelector.a.b()
   bei TreeSharp.Composite.Tick(Object context)
   bei TreeSharp.PrioritySelector.a.b()
   bei TreeSharp.Composite.Tick(Object context)
   bei Styx.Logic.BehaviorTree.TreeRoot.b()

 

Well, thats a useless post by a whining kid... Oh, he even forgot the log, GJ man!

Anyway, the problem persists, this time in Sholozar Bazin.

 

ofc it's not helpful it shouldn't be anyway, its a flame you know? cause I'm asking
myself how it's possible to make an almost stable release (out of 4.0.1) this buggy.
ofc its new mesh and all this shit but the fuck even pvp should work fine also northrend
in fact nothing changed there.

I'm just a bit pissed you know, maybe youre just one of the guys where using honorbuddy
sometimes but I'm using it almost all. But I gonna to stop that shit, you guys want logs here
you go, thousand logs check it fix it do it.

 

[11:40:03:276] System.Security.Cryptography.CryptographicExceptio n: Padding is invalid and cannot be removed.

is fixed in Durotar I think, works fine for me.

Just become now: File: Line: 0 Error: Metadata file 'Tripper.Tools.dll' could not be found but I saw an post in the forum that should fix this.

 

Bug: Received error code from mesh server when attempting to download : Server Exception

Nothing special to say: Just started grind bot.. worked 1-2 mins and then stood still. =(

 

Thankyou, but this wont work.

Could not compile CC from C:\Documents and Settings\Administrator\Desktop\Honorbuddy\CustomClasses\Default Warrior!
File: Line: 0 Error: Metadata file 'Tripper.Tools.dll' could not be found

Could not compile CC from C:\Documents and Settings\Administrator\Desktop\Honorbuddy\CustomClasses\TankWarrior!
File: Line: 0 Error: Metadata file 'Tripper.Tools.dll' could not be found



Log:

 

I experienced 2 major bugs so far which are, in my opinion, very critical.

1. The bot stops fighting in the middle of combat and dies (happens sometimes).
2. The bot doesn't release the corpse after dying, you have to manually do this (happens always!).

The log is a short one so devs can look through it quicker.

 

For some reason i can't logon now, i could yesterday night, and the comp was then turned off for a few hours still can't log on

Thx for the hard work devs and keep going

 

Hi,
Im having issues logging in, I'm getting session limit although I shouldnt be as far as I can tell. I have attatched the log

Any news on a fix for this?

cheers

 

I never had the crypto error, but I deleted my mesh folder all the same. (my username is lowercase too)

As soon as I tried doing anything I got the System.OutOfMemoryException
(logfile attached, I only started IB and as soon as I entered the dungeon it pooped its pants)

 

After giving up with .net issue, i have reformatted again and have nothing installed other than HB and wow

when i have wow running and i open HB it will insta crash with the following error
Styx.helpers.charactersettings

i have the option to ignore and continue, if i do continue i can login but gives the next error of "invalid executor used in getobjectname" then closes

Any ideas?, please dont say .net i really dont want another format

Edit - This was due to being in dx11, Thanks for the advice

 

Having the exact same problem.

 

"Padding is invalid and cannot be removed." Error report could not be sent. no log to show

 

There is a lot of threads to read on, but does anyone mentioned about the navigation error? at least on zangarmash, it get stuck on trees, try to go by under the bridges that it cannot go, and keep there trying. doen't even try to get unstuck like it did before.